Makita finish nailer 18v

Makita finish nailer 18v DEFAULT

The Makita 18V LXT&#; Lithium-Ion Cordless /2” Straight Finish Nailer, 16 Ga. (model XNB02Z, tool only) is an ideal solution for trim work, baseboard and crown molding installation, flooring and other woodworking applications. The XNB02Z is compact and powerful, and drives standard 16 gauge straight finish nails from 1” to /2” in length with a magazine capacity of up to nails. Using an 18V LXT&#; Ah battery (sold separately), the XNB02Z will drive up to 1, finish nails on a single charge.

Additional features include an anti-dry fire mechanism that is engineered to help prevent driving blanks and damage to work surface. It has a 2-mode selector switch, trigger lock button, and “tool-less” depth adjustment for precise flush and countersink finish.

It’s part of Makita’s expanding 18V Lithium-Ion system, the world’s largest cordless tool system powered by 18V Lithium-Ion slide-style batteries. Makita 18V Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.

For improved tool performance and extended battery life, Makita created Star Protection Computer Controls™. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT&#; and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.

  • Power Type : Cordless
  • Fastening category : Finish
  • Nail Size : 1" to /2" (16 ga.)
  • Maximum Magazine Capacity :
  • Battery : 18V LXT&#; Lithium-Ion
  • Dimensions (LxWxH) : /8" x /4" x /2"
  • Net Weight (with battery) : lbs.
  • Nailer Type : Finish Nailer
  • Form Factor (LXT) : 18V LXT&#;
  • Motor Type : Brushed
  • Shipping Weight : lbs.
  • UPC Code :
  • Products Related To XNB02Z

    Page of Start over

    Sours: https://www.makitatools.com/products/details/XNB02Z

    18V STRAIGHT FINISH NAILER

    The Makita Volt LXT Lithium-Ion Cordless /2 in. Straight Finish Nailer, Gauge (model XNB02Z, tool only) is an ideal solution for trim work, baseboard and crown molding installation, flooring and other woodworking applications. The XNB02Z is compact and powerful and drives standard Gauge straight finish nails from 1 in. to /2 in. length with a magazine capacity of up to nails. Using an Volt LXT Ah battery (sold separately), the XNB02Z will drive up to 1, finish nails on a single charge. Additional features include an anti-dry fire mechanism that is engineered to help prevent driving blanks and damage to work surface. It has a 2-mode selector switch, trigger lock button and tool-less depth adjustment for precise flush and countersink finish. Its part of Makitas expanding Volt Lithium-Ion system, the worlds largest cordless tool system powered by Volt Lithium-Ion slide-style batteries. Makita Volt Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.

    Sours: https://www.starsales.com/makitav-lxt-lithiumion-cordlessstraight-finish-nailerga-tool-only/
    1. Honda dealers in marysville ohio
    2. Empire: total war austria
    3. Dallas county iowa assessor
    4. Sonic and tails costume diy

    There&#;s a new Makita gauge cordless finish nailer on its way to retailers and we got an early sample in to check out. The straight finish nailer fills out a line that includes an gauge brad nailer and gauge pinner on the 18V platform and a similar pinner on the 12V CXT line. They&#;re still lacking a gauge angled nailer and framing nailer for the cordless platform, but let&#;s not get too far off track &#; you&#;re here to find out more about the Makita XNB


    Pros

    • Excellent build quality
    • Excellent jam clearance access
    • Rapid charger included in kit

    Cons

    • Expensive
    • On the heavy side in its class
    • Typical cordless nailer firing delay

    The Bottom Line

    Makita competes well in the cordless finish nailer category with a quality build and excellent performance. The firing delay and heavier weight over pneumatic guns make this a tool that&#;s best for occasional users or punch lists rather than a primary option. Its biggest advantage will be the time and effort it saves you when you&#;re not having to set up a compressor, run hose, and then reverse the whole process when you&#;re done.

    Key Features

    Magazine

    Makita opts for a metal rear loading magazine. It adds some weight, it&#;s more durable than plastic, and it helps the slider action work more smoothly when you reload. On the side, you&#;ll notice markings that will quickly tell you what size nails are there from the last project or user, though it&#;s in millimeters instead of inches.

    Makita Gauge Cordless Finish Nailer XNB02 Review

    Selector Switch

    Having two modes to work with isn&#;t that big of a deal on its own, nor is an easy tool-free mode change. Makita moves away from standard trends and puts their switch to the lower left, just above the battery. It&#;s covered to help avoid getting any debris inside.

    Makita Gauge Cordless Finish Nailer XNB02 Review

    Jam Clearance

    The Makita gauge cordless finish nailer has one of the best jam clearance mechanisms I&#;ve seen. Just flip the lever and lift to access the driver area. There are other systems very similar in design, but Makita&#;s action is much smoother and easier to work with. It&#;s about as effortless as you can hope for.

    Makita Gauge Cordless Finish Nailer XNB02 Review

    Rapid Charger

    Chargers aren&#;t usually a highlight of anyone&#;s feature set. However, Makita includes a Rapid Charger like they do with the majority of their cordless tools. You can expect the Ah batteries in the kit to charge in roughly 25 minutes. Even if your battery is hot, the charger will actively cool it so it can start the cycle quickly.

    Hard Plastic Case

    Makita packs the XNB02 in a hard plastic storage case that easily contains the entire kit and stacks beautifully in your shop, truck, or trailer.

    Additional Features

    • Dry fire lockout
    • LED above the nose
    • Reversible belt clip
    • Two no-mar pads
    • Tool-free depth adjustment
    • Trigger lockout
    • Rubber bumpers to protect work surface
    • Narrow nose design for better tight access
    Makita Gauge Cordless Finish Nailer XNB02 Review
    Makita Gauge Cordless Finish Nailer XNB02 Review
    Makita Gauge Cordless Finish Nailer XNB02 Review

    Ergonomics

    Everyone expects to deal with extra weight on any cordless nailer. The Makita XNB02 is no different, weighing in at pounds bare and pounds with the Ah battery on our scales. That puts it near the higher end.

    Balance is very weight-forward when you&#;re using it in a vertical orientation. Switching to a horizontal hold when you&#;re close to a ceiling or floor, it&#;s still weighted forward. However, the top-to-battery balance is in check. Again, nearly every cordless finish nailer you use is going to have a similar weight distribution. It&#;s something you&#;ll need to get used to if you&#;re making the switch from pneumatics.

    The handle is very comfortable with its combination of shape and rubber overmold. The diameter is a bit thicker than Makita&#;s driver lineup, but it&#;s just about perfect for the handling the weight and balance of this gun.

    Performance

    Makita Gauge Cordless Finish Nailer XNB02 Review

    I didn&#;t have a project lined up to put the Makita XNB02 on, so I grabbed some scrap materials from around the shop to simulate the variety of materials you&#;re likely to use a gauge nailer on.

    The nailer has a reasonable amount of power to work with. Compared to our pneumatic guns, it&#;s a little under the strongest models. In some of our harder material, it drives 2&#; nails flush on the shallowest setting and sinks them at full depth. You&#;ll still want to test the depth in scrap, especially in hardwoods if you&#;re going to push the /2&#; limit.

    Pro Tip: Make sure you adjust the depth in scrap material before firing into your workpiece. Wood has different densities depending on the species.

    The Makita gauge cordless finish nailer needs a half-second to wind up before firing when you pull the trigger. This may be a make-or-break point for you since Hitachi figured out a way around it with their models and it&#;s not an issue with pneumatic guns.

    During the course of my testing, I haven&#;t had any jams or misfires. They&#;re going to come eventually like all nailers, but it&#;s not going to be due to a chronic design issue.

    One thing that will come into play for a small percentage of users is the nail length. Some models get you down to a 3/4&#; nail, but the smallest Makita lets you go is 1&#;.


    Price and Value

    At nearly $ for the bare tool, the Makita gauge cordless finish nailer isn&#;t cheap. Of the major options you have on the cordless side, it&#;s the most expensive. Comparatively, Hitachi&#;s version is $ and Milwaukee&#;s is $, both as full kits.

    Makita clearly has an excellent build quality and that&#;s what you&#;ll want to weigh against your budget and performance expectations as you compare models.

    The Bottom Line

    Makita competes well in the cordless finish nailer category with a quality build and excellent performance. The firing delay and heavier weight over pneumatic guns make this a tool that&#;s best for occasional users or punch lists rather than a primary option. The XNB02&#;s biggest advantage will be the time and effort it saves you when you&#;re not having to set up a compressor, run hose, and then reverse the whole process when you&#;re done.

    Pneumatic vs Cordless Nailers: What&#;s the Best Choice?

    Makita Gauge Cordless Finish Nailer Specifications

    • Model: Makita XNB02
    • Power Source: Makita 18V LXT battery (two Ah included in kit)
    • Nailer Gauge: 16
    • Nail Length: 1&#; &#; /2&#;
    • Maximum Capacity: nails
    • Dimensions: /8&#; x /4&#; x /2&#;
    • Weight:
    • Price: $ (bare)
    • Warranty: 3 years
    Shop Amazon
    Sours: https://www.protoolreviews.com/makitagauge-cordless-finish-nailer-xnbreview/
    Makita 18V Brad Nailer Review \u0026 Test (DFN350)

    Departure, on the evening when you called. Before that, I had sported a mine skirt for five days, tried to seduce him. - Who is he. - A guy from another city.

    Finish 18v makita nailer

    Frolicking in the surface of the scales. Symbols flared and faded on the wings, Tiirith felt that she had changed, but did not yet realize how much. Usually, the demon turned queens into his servants when they completed their function, but not before or in the process.

    The commander-in-chief realized that he was too carried away by her and. Overdid it, he broke the rule, became angry at himself, at her and at everyone.

    Makita 40v Cordless Brad Nailer Review // This is the new line from Makita and it's awesome

    Macho and I were greeted with applause. And to my surprise there were only seven chiefs, Although naked I walked through about 10-15 people blindfolded. Yuri noticed that I look luxurious in such a charming dress. And at the same time pointedly ran his finger through the hairs of my intimate haircut and further up the tongues of fire depicted on the dresses.

    Now discussing:

    She poured a beer and handed him a glass. - Well. - She said. - Do you like these magazines. - Not.



    854 855 856 857 858