Kitchen cabinets 16 inches deep

Kitchen cabinets 16 inches deep DEFAULT

Tall Kitchen Cabinets

Tall kitchen cabinets are a part of many kitchens and are often referred to as pantry or utility cabinets. They typically come in standard sizes, although they may need to be custom built to fit in your space.

Kitchen cabinets take up important real estate in your kitchen, and they serve both functional and design purposes. Their main function in general is to serve as storage space for various food products, cookware and dishware. Basic types of cabinets include base cabinets and wall cabinets, each of which typically come in standard sizes.

In general, base kitchen cabinets are 24 inches deep and 36 inches high. They sit directly on the floor or rest upon a 4-inch toe kick riser. Their width can vary depending on what's sitting on top of them: sinks, cooktops or countertops. Wall cabinets are usually 24 inches high and 12 to 16 inches deep. The standard width for two-door wall cabinets is 30 to 36 inches.

Tall kitchen cabinets, on the other hand aren't as black-and-white in terms of sizing. While they are usually 84 inches high, they can range up to 96 inches tall as well to accommodate required pantry or utility storage.

Many tall kitchen cabinets are used for pantries since their floor-to-ceiling height allows for shelves that accommodate food and supplies efficiently. They can also be used for utility storage as again their height can accommodate tall storage items such brooms, mops and vacuum cleaners.

Aside from using floor-to-ceiling kitchen cabinets as pantries, homeowners seeking more storage and a unique and elongated design in their kitchen may decide to place tall kitchen cabinets on their walls or as their base cabinets. In order for these types of cabinets to be made longer than their standard size, however, they will need to be custom made, which can be more costly a project than purchasing standard-sized stock cabinets.

Whether for added design or added storage, tall kitchen cabinets bring a fresh look and much needed functional space to any kitchen.

Sours: https://www.hgtv.com/design/rooms/kitchens/tall-kitchen-cabinets

Base Cabinets - Standard Drawer Over Door

Standard base cabinets are the most popular cabinet in the kitchen. They are available with or without an upright center divider, and with single or double doors and drawers. These cabinets make a great storage addition and can be fitted with a variety of accessories. Check out our collection below!

  • Single Door Base Cabinet

    Single Door Base Cabinet

    CABINET CODE: B  (CSB will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 12″ to 24″ in 1/16″ increments
    Height: 31.5″ to 42″ in 1/16″ increments
    Depth: 12″, 15″, 18″, 21″, 24″, 27″, and 30″ Only.

    TO ORDER: Indicate B + width + height. (i.e. B1834.5 for an 18″ W x 34.5″ H cabinet). If depth other than standard 24″ is required, note as special instruction.

    DESCRIPTION: Standard Base cabinet, with a single door, and 1 drawer. (Note: when height is changed from standard 34.5″ H, the drawer opening remains fixed at 5″ H).

  • Butt Door Base Cabinet

    Butt Door Base Cabinet

    CABINET CODE: B_BD  (CSB will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 24″ to 36″ in 1/16″ increments
    Height: 31.5″ to 42″ in 1/16″ increments
    Depth: 12″, 15″, 18″, 21″, 24″, 27″, and 30″ Only.

    TO ORDER: Indicate B + width + height +BD. (i.e. B3034.5BD for a 30″ W x 34.5″ H cabinet). If depth other than standard 24″ is required, note as special instruction.

    DESCRIPTION: Standard Base cabinet, with Butt Doors, and 1 drawer. (Note: when height is changed from the standard 34.5″ H, the drawer opening remains fixed at 5″ H).

  • Double Door Base Cabinet with Single Drawer

    Double Door Base Cabinet with Single Drawer

    CABINET CODE: B  (CSB2D1D will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 27″ to 36″ in 1/16″ increments
    Height: 31.5″ to 42″ in 1/16″ increments
    Depth: 12″, 15″, 18″, 21″, 24″, 27″, and 30″ Only.

    TO ORDER: Indicate B + width + height. (i.e. B3634.5 for a 36″ W x 34.5″ H cabinet). If depth other than standard 24″ is required, note as special instruction.

    DESCRIPTION: Standard Base cabinet, with double doors, upright center divider, and 1 drawer. (Note: when height is changed from standard 34.5″ H, the drawer opening remains fixed at 5″ H).

  • Butt Door Base Cabinet w/ 2 Drawers

    Butt Door Base Cabinet w/ 2 Drawers

    CABINET CODE: B_BD2D  (CSBBD2D will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 30″ to 36″ in 1/16″ increments
    Height: 31.5″ to 42″ in 1/16″ increments
    Depth: 12″, 15″, 18″, 21″, 24″, 27″, and 30″ Only.

    TO ORDER: Indicate B + width + height + BD2D. (i.e. B3034.5BD2D for a 30″ W x 34.5″ H cabinet). If depth other than standard 24″ is required, note as special instruction.

    DESCRIPTION: Standard Base cabinet, with Butt Doors, and 2 drawers separated by an upright center divider. (Note: when height is changed from standard 34.5″ H, the drawer opening remains fixed at 5″ H). IMPORTANT NOTE: Drawer fronts will not align with doors on full overlay applications (drawer fronts will have a 1/2″ gap while doors will butt together, meaning doors will be wider than drawer fronts).

  • Double Door/Drawer Base Cabinet

    Double Door/Drawer Base Cabinet

    CABINET CODE: B  (CSB2D2D will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 30″ to 48″ in 1/16″ increments
    Height: 31.5″ to 42″ in 1/16″ increments
    Depth: 12″, 15″, 18″, 21″, 24″, 27″, and 30″ Only.

    TO ORDER: Indicate B + width + height. (i.e. B4234.5 for a 42″ W x 34.5″ H cabinet). If depth other than standard 24″ is required, note as special instruction.

    DESCRIPTION: Standard Base cabinet, with double doors, upright center divider, and 2 drawers. (Note: when height is changed from standard 34.5″ H, the drawer opening remains fixed at 5″ H).

  • Base Cabinet – 3 Door/3 Drawer

    Base Cabinet – 3 Door/3 Drawer

    CABINET CODE: B  (CSB3D3D will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 48″ to 72″ in 1/16″ increments
    Height: 31.5″ to 42″  in 1/16″ increments
    Depth: 12″, 15″, 18″, 21″, 24″, 27″, and 30″ Only.

    TO ORDER: Indicate B + width + height. (i.e. B6034.5 for a 60″ W x 34.5″ H cabinet). If depth other than standard 24″ is required, note as special instruction.

    DESCRIPTION: Base cabinet, with 3 drawers, over 3 doors. (Note: middle door/drawer are 1/2″ overlay (left to right) and the door will use a 1/2″ overlay hinge).

  • Base Cabinet - Base w/ Trash Can Pull-Out

    Base Cabinet - Base w/ Trash Can Pull-Out

    CABINET CODE: BTCP  (CSBTCP will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 18″ to 27″ in 1/16″ increments
    Height: 31.5″ to 34.5″  in 1/16″ increments
    Depth: 24″

    TO ORDER: Indicate BTCP + width + height. (i.e. BTCP2134.5 for a 21″ W x 34.5″ H cabinet).

    DESCRIPTION: Base cabinet with options for single, double, or no trash can cutouts. Units 18″- 23-15/16″ will have one can, 24″-27″ two cans

Base Cabinets – Sink

Sink cabinets are a critical aspect of any kitchen design. We offer a huge selection of sink cabinets including Farmer sink (apron sink) cabinets. These cabinets are also used for drop in cook tops.

  • Sink Base Cabinet w/Butt Doors

    Sink Base Cabinet w/Butt Doors

    CABINET CODE: BS_BD  (CSBS will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 24″ to 36″ in 1/16″ increments
    Height: 31.5″ to 42″ in 1/16″ increments
    Depth: 18″ to 30″ in 1/16″ increments

    TO ORDER: Indicate BS + width + height + BD. (i.e. BS3034.5BD for a 30″ W x 34.5″ H cabinet). If depth other than standard 24″ is required, note as special instruction.

    DESCRIPTION: Base cabinet, with Butt doors, false drawer front, and no shelf.

  • Sink Base Cabinet w/ Double Doors, Single Drawer

    Sink Base Cabinet w/ Double Doors, Single Drawer

    CABINET CODE: BS  (CSBS2D1D will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 27″ to 36″ in 1/16″ increments
    Height: 31.5″ to 42″ in 1/16″ increments
    Depth: 18″ to 30″ in 1/16″ increments

    TO ORDER: Indicate BS + width + height. (i.e. BS3034.5 for a 30″ W x 34.5″ H cabinet). If depth other than standard 24″ is required, note as special instruction.

    DESCRIPTION: Base cabinet, with double doors, upright center divider, false drawer front, and no shelf.

  • Sink Base Cabinet w/Double Doors

    Sink Base Cabinet w/Double Doors

    CABINET CODE: BS  (CSBS2D2D will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 30″ to 48″ in 1/16″ increments
    Height: 31.5″ to 42″ in 1/16″ increments
    Depth: 18″ to 30″ in 1/16″ increments

    TO ORDER: Indicate BS + width + height. (i.e. BS4234.5 for a 42″ W x 34.5″ H cabinet). If depth other than standard 24″ is required, note as special instruction.

    DESCRIPTION: Base cabinet, with double doors, upright center divider, 2 false drawer fronts, and no shelf.

  • Apron (Farm) Sink Cabinet w/Butt Doors

    Apron (Farm) Sink Cabinet w/Butt Doors

    CABINET CODE: ASB_BD  (CSASB will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 24″ to 36″ in 1/16″ increments
    Height: 31.5″ to 42″ in 1/16″ increments
    Depth: 18″ to 30″ in 1/16″ increments

    TO ORDER: Indicate ASB + width + height +BD. (i.e. ASB3034.5BD for a 30″ W x 34.5″ H cabinet). If depth other than standard 24″ is required, note as special instruction.

    DESCRIPTION: Apron (farm sink) Base cabinet, with Butt doors, and no shelf. (Note: factory sink bowl opening is 5″ H by 6″ less than the cabinet’s width). The sink opening is meant to be field trimmable to meet your sink’s cut out spec. (Note: custom sink cut outs are NOT available from the factory. They MUST be field cut by the installer)! The sink opening is trimmable 4.5″ in height and 3″ in width. (Note: when height is changed from standard 34.5″ H, the lower door opening section changes). To accommodate a sink that will not work with these cut out limits, please contact us for a quote on a custom face frame. (IMPORTANT NOTE: sink supports are NOT included with this cabinet)!

  • Apron (Farm) Sink Cabinet w/Double Doors

    Apron (Farm) Sink Cabinet w/Double Doors

    CABINET CODE: ASB  (CSASB will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 27″ to 48″ in 1/16″ increments
    Height: 31.5″ to 42″ in 1/16″ increments
    Depth: 18″ to 30″ in 1/16″ increments

    TO ORDER: Indicate ASB + width + height. (i.e. ASB4234.5BD for a 42″ W x 34.5″ H cabinet). If depth other than standard 24″ is required, note as special instruction.

    DESCRIPTION: Apron (farm sink) Base cabinet, with  double doors, upright center divider, and no shelf. (Note: sink bowl opening is 5″ H by 6″ less than the cabinet’s width). The sink opening is meant to be field trimmable to meet your sink’s cut out spec. (Note: custom sink cut outs are NOT available from the factory. They MUST be field cut by the installer)! The sink opening is trimmable 4.5″ in height and 3″ in width. (Note: when height is changed from standard 34.5″ H, the lower door opening section changes). To accommodate a sink that will not work with these cut out limits, please contact us for a quote on a custom face frame. (IMPORTANT NOTE: sink supports are NOT included with this cabinet)!

  • Base Sink Full Door w/Butt Doors

    Base Sink Full Door w/Butt Doors

    CABINET CODE: BSFD_BD  (CSBSFD will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 24″ to 36″ in 1/16″ increments
    Height: 31.5″ to 42″ in 1/16″ increments
    Depth: 5.5″ to 30″ in 1/16″ increments

    TO ORDER: Indicate BSFD + width + height + BD. (i.e. BSFD3034.5BD for a 30″ W x 34.5″ H cabinet). If depth other than standard 24″ is required, note as special instruction.

    DESCRIPTION: Base cabinet, with full height butt doors and no shelf.

Base Cabinets – Full Door

Full door cabinets are versatile. When fitted with pull out trays, they serve as a base pantry. Or they serve as built in under-counter oven cabinets by simply deleting the doors. Take a look at our collection below and check out the details of each cabinet.

  • Base Full Door Cabinet w/ Single Door

    Base Full Door Cabinet w/ Single Door

    CABINET CODE: BFD  (CSBFD will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 9″ to 24″ in 1/16″ increments
    Height: 10″ to 48″ in 1/16″ increments
    Depth: 5.5″ to 30″ in 1/16″ increments

    TO ORDER: Indicate BFD + width + height. (i.e. BFD0934.5 for a 9″ W x 34.5″ H cabinet). If depth other than standard 24″ is required, note as special instruction.

    DESCRIPTION: Base cabinet, with a full single door, and no drawer. The 9″ W version is ideal for a tray base application. (Note: all cabinets include 2 shelves, EXCEPT the 9″ W cabinet, which doesn’t include any shelves).

  • Base Full Door Cabinet w/Butt Doors

    Base Full Door Cabinet w/Butt Doors

    CABINET CODE: BFD_BD  (CSBFDBD will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 24″ to 36″ in 1/16″ increments
    Height: 10″ to 48″ in 1/16″ increments
    Depth: 5.5″ to 30″ in 1/16″ increments

    TO ORDER: Indicate BFD + width + height + BD. (i.e. BFD3034.5BD for a 30″ W x 34.5″ H cabinet). If depth other than standard 24″ is required, note as special instruction.

    DESCRIPTION: Base cabinet, with full Butt doors, and no drawer.

  • Base Full Door Cabinet w/Double Doors

    Base Full Door Cabinet w/Double Doors

    CABINET CODE: BFD  (CSBFD will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 27″ to 48″ in 1/16″ increments
    Height: 10″ to 48″ in 1/16″ increments
    Depth: 5.5″ to 30″ in 1/16″ increments

    TO ORDER: Indicate BFD + width + height. (i.e. BFD3034.5 for a 30″ W x 34.5″ H cabinet). If depth other than standard 24″ is required, note as special instruction.

    DESCRIPTION: Base cabinet, with full double doors, upright center divider, and no drawer.

  • Base Full Door w/Two Center

    Base Full Door w/Two Center

    CABINET CODE: BFD  (CSBFD will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 48″ to 72″ in 1/16″ increments
    Height: 10″ to 48″ in 1/16″ increments
    Depth: 5.5″ to 30″ in 1/16″ increments

    TO ORDER: Indicate BFD + width + height. (i.e. BFD6034.5 for a 60″ W x 34.5″ H cabinet). If depth other than standard 24″ is required, note as special instruction.

    DESCRIPTION: Base cabinet, with three full doors, two upright center dividers, and no drawer.

  • Base Full Door w Single Door & /Roll Outs

    Base Full Door w Single Door & /Roll Outs

    CABINET CODE: BFDRO(i)  (CSBFDRO(i) will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized). The “i” denotes inset as a different drawer box width is required to accommodate the inset hinge.

    SIZES:
    Width: 12″ to 24″ in 1/16″ increments (inset: 15″ to 24″ in 1/16″ increments)
    Height: 31.5 to 34.5″ in 1/16″ increments
    Depth: 12″, 15″, 18″, 21″, 24″, 27″ or 30″ only.

    TO ORDER: Indicate BFDRO + width + height. (i.e. BFDRO3034.5 for a 30″ W x 34.5″ H cabinet). If depth other than standard 24″ is required, note as special instruction. Roll-out drawers include hand pulls. Specify Standard top rout, Circle or Ellipse pull (shown).

    DESCRIPTION: Base cabinet with single full door and 4 roll outs behind the door. The roll out trays are all 5″ high. Interior panels are predrilled for drawer slide placement and installation.

  • Base Full Door w Butt Doors & /Roll Outs

    Base Full Door w Butt Doors & /Roll Outs

    CABINET CODE: BFDRO(i)BD  (CSBFDRO(i)BD will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized). The “i” denotes inset as a different drawer box width is required to accommodate the inset hinge.

    SIZES:
    Width:  24″  to 36″ in 1/16″ increments
    Height: 31.5 to 34.5″ in 1/16″ increments
    Depth: 12″, 15″, 18″, 21″, 24″, 27″ or 30″ only.

    TO ORDER: Indicate BFDROBD + width + height + BD. (i.e. BFDRO3034.5BD for a 30″ W x 34.5″ H cabinet). If depth other than standard 24″ is required, note as special instruction. Roll-out drawers include hand pulls. Specify Standard top rout, Circle or Ellipse pull (shown).

    DESCRIPTION: Base cabinet with single full door and 4 roll outs behind the door. The roll out trays are all 5″ high. Interior panels are predrilled for drawer slide placement and installation.

Base Cabinets – Drawer Base

We offer drawer base cabinets with 1, 2, 3, 4 or 5 drawers, which allow you the flexibility you need to create ideal storage solutions for your kitchen. Check out our offering below and download the full catalog to see all of your options!

  • Base Cabinet – 2 Drawer

    Base Cabinet – 2 Drawer

    CABINET CODE: B2D  (CSB2D will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 12″ to 39″ in 1/16″ increments
    Height: 31.5″ to 34.5″ in 1/16″ increments
    Depth: 12″, 15″, 18″, 21″, 24″, 27″, and 30″ Only.

    TO ORDER: Indicate B2D + width + height. (i.e. B2D2434.5 for a 24″ W x 34.5″ H cabinet). If depth other than standard 24″ is required, note as special instruction.

    DESCRIPTION: Base cabinet, with 2 equal height drawers. (Note: when height is changed from standard 34.5″ H, the drawer openings remain equal).

  • Base 2 Drawer with Roll Outs

    Base 2 Drawer with Roll Outs

    CABINET CODE: B2DRO  (CSB2DRO will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 12″ to 39″ in 1/16″ increments
    Height: 31.5″ to 34.5″  in 1/16″ increments
    Depth: 12″, 15″, 18″, 21″, 24″, 27″, and 30″ Only.

    TO ORDER: Indicate B2DRO + width + height. (i.e. B2DRO2434.5 for a 24″ W x 34.5″ H cabinet). If depth other than standard 24″ is required, note as special instruction. Roll outs include hand pull cutout. Specify Standard top rout hand pull, circle hole or ellipse hole in special instructions. Standard top rout will be used unless specified.

    DESCRIPTION: Base cabinet with 2 drawers and roll-outs hidden above each. (Note: when height is changed from standard 34.5″ H, both drawers will remain equal).

  • Base Cabinet – 3 Drawer

    Base Cabinet – 3 Drawer

    CABINET CODE: B3D  (CSB3D will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 12″ to 39″ in 1/16″ increments
    Height: 31.5″ to 34.5″  in 1/16″ increments
    Depth: 12″, 15″, 18″, 21″, 24″, 27″, and 30″ Only.

    TO ORDER: Indicate B3D + width + height. (i.e. B3D2434.5 for a 24″ W x 34.5″ H cabinet). If depth other than standard 24″ is required, note as special instruction.

    DESCRIPTION: Base cabinet, with 3 drawers. (Note: when height is changed from standard 34.5″, only the lower opening height changes. Upper two opening heights remain fixed at 5″ H and 8″ H respectively).

  • Base 3 Drawer – Equal Height Bottom Drawers

    Base 3 Drawer – Equal Height Bottom Drawers

    CABINET CODE: B3DEH  (CSB3DEH will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 12″ to 39″ in 1/16″ increments
    Height: 31.5″ to 34.5″  in 1/16″ increments
    Depth: 12″, 15″, 18″, 21″, 24″, 27″, and 30″ Only.

    TO ORDER: Indicate B3DEH + width + height. (i.e. B3DEH2434.5 for a 24″ W x 34.5″ H cabinet). If depth other than standard 24″ is required, note as special instruction.

    DESCRIPTION: Base cabinet, with 3 drawers. Bottom 2 drawers are equal height (9.75″ H openings on standard 34.5″ H cabinet). (Note: when height is changed from standard 34.5″ H, only the lower openings height changes. Upper drawer opening remains fixed at 5″ H).

  • Base Cabinet – 4 Drawers

    Base Cabinet – 4 Drawers

    CABINET CODE: B4D  (CSB4D will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 12″ to 39″ in 1/16″ increments
    Height: 31.5″ to 34.5″  in 1/16″ increments
    Depth: 12″, 15″, 18″, 21″, 24″, 27″, and 30″ Only.

    TO ORDER: Indicate B4D + width + height. (i.e. B3D2434.5 for a 24″ W x 34.5″ H cabinet). If depth other than standard 24″ is required, note as special instruction.

    DESCRIPTION: Base cabinet, with 4 drawers. (Note: when height is changed from standard 34.5″ H, only lower opening height changes. Upper three opening heights remain fixed at 5″ H).

  • Base 4 Drawer w/ Split Top Drawers, Equal Height Bottom Drawers

    Base 4 Drawer w/ Split Top Drawers, Equal Height Bottom Drawers

    CABINET CODE: B4D2S2EH  (CSB4D2S2EH will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 30″ to 39″ in 1/16″ increments
    Height: 31.5″ to 34.5″  in 1/16″ increments
    Depth: 12″, 15″, 18″, 21″, 24″, 27″, and 30″ Only.

    TO ORDER: Indicate B4D2S2EH + width + height. (i.e. B4D2S2EH3634.5 for a 36″ W x 34.5″ H cabinet). If depth other than standard 24″ is required, note as special instruction.

    DESCRIPTION: Base cabinet, with 4 drawers. Bottom 2 drawers are equal height (9.75″ H openings on standard 34.5″ H cabinet). Top 2 drawers are equal width. (Note: when height is changed from standard 34.5″ H, only the lower openings height changes. Upper drawer openings remain fixed at 5″ H).

  • Drawer Base – Double Drawer w/Divider

    Drawer Base – Double Drawer w/Divider

    CABINET CODE: B1DCS  (CSB1DCS will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 30″ to 48″ in 1/16″ increments
    Height: 12″ to 21″  in 1/16″ increments
    Depth: 12″, 15″, 18″, 21″, 24″, 27″, and 30″ Only.

    TO ORDER: Indicate B1DCS + width + height. (i.e. B1DCS4221 for a 42″ W x 21″ H cabinet). If depth other than standard 24″ D, or height other than standard 21″H is required, then note as special instruction.

    DESCRIPTION: Base cabinet, with 2 drawers.

  • Drawer Base – Single Drawer

    Drawer Base – Single Drawer

    CABINET CODE: B1D  (CSB1D will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 12″ to 36″ in 1/16″ increments
    Height: 12″ to 21″  in 1/16″ increments
    Depth: 12″, 15″, 18″, 21″, 24″, 27″, and 30″ Only.

    TO ORDER: Indicate B1D + width + height. (i.e. B1D2421 for a 24″ W x 21″ H cabinet). If depth other than standard 24″ D, or height other than standard 21″ H, is required, then note as special instruction.

    DESCRIPTION: Base cabinet, with 1 drawer.

Base Cabinets – Corner Base

Our corner base offering includes blind corner, diagonal corner, and pie cut corner cabinet options. We also offer an assortment of interior storage options.

  • Base Cabinet – Corner Pie Cut

    Base Cabinet – Corner Pie Cut

    CABINET CODE: BCP  (CSBCP will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 33″ to 42″ in 1/16″ increments
    Height: 31.5″ to 42″ in 1/16″ increments
    Depth: 33″ to 42″ in 1/16″ increments

    TO ORDER: Indicate BCP + Left leg width + Right leg width + height. (i.e. BCP333634.5 for a 33″ W Left leg x 36″ W Right leg x 34.5″ H cabinet).

    DESCRIPTION: Corner, pie cut cabinet. (Note: Susans are NOT included, but may be added to this cabinet – See interior storage options). A soss hinge is included for joining the doors together. (Note: some door designs do not allow for soss hinge borings. In those cases, customers will need to source their own solution for joining the doors. We recommend a Salice hinge, available at www.rockler.com, for joining the doors). Please note that the depth remains 24″ even as the size changes. The pie cut area is what gets larger/smaller. Also, please note the minimum clearance width, in halls and doorways, to accommodate a BCP36 is 35″ W.

  • Base Corner – Diagonal, Full Door

    Base Corner – Diagonal, Full Door

    CABINET CODE: BCFD (CSBCFD will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 36″ Only
    Height: 31.5″ to 42″ in 1/16″ increments
    Depth: 36″ Only

    TO ORDER: Indicate BCFD + width + height. (i.e. BCFD3634.5 for a 36″ W x 36″ W x 34.5″ H cabinet).

    DESCRIPTION: Diagonal, full door, corner cabinet. (Note: Susans are NOT included, but may be added to this cabinet – See interior storage options). Also please note, the minimum clearance width, in halls and doorways, to accommodate this cabinet is 35″ W.

  • Base Sink Corner Cabinet

    Base Sink Corner Cabinet

    CABINET CODE: BSC (CSBSC will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 36″ Only
    Height: 31.5″ to 42″ in 1/16″ increments
    Depth: 36″ Only

    TO ORDER: Indicate BSC + width + height. (i.e. BSC3634.5 for a 36″ W x 36″ W x 34.5″ H cabinet).

    DESCRIPTION: Diagonal corner cabinet, with door, false drawer front, and NO shelf. Please note, the minimum clearance width, in halls and doorways, to accommodate this cabinet is 35″ W.

  • Base Corner Pie Cut 3 Drawer

    Base Corner Pie Cut 3 Drawer

    CABINET CODE: BCP3D (CSBCP3D will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 39″, 42″ Only
    Height: 31.5″ to 34.5″ in 1/16″ increments
    Depth: 39″ and 42″ Only

    TO ORDER: Indicate BCP3D + width + height. (i.e. BCP3D3934.5 for a 39″ W x 34.5″ H cabinet).

    DESCRIPTION: Base Pie Cut Corner Cabinet with 3 drawers. (IMPORTANT NOTE: These cabinets are more complex to build than other corner cabinets. Please refer to the assembly video on website and be sure to clarify with your Cabinet Coach before ordering. NOT AVAILABLE with inset applications. NOT AVAILABLE with mitered drawer fronts. Customizable in Height only. When height changes, only lower opening changes. Separate toe platform is standard so that the cabinet can pass through doorways. A minimum door opening width of 35″ is required or cabinet will need to be assembled in its final room.

  • Base Blind Corner Cabinet Left

    Base Blind Corner Cabinet Left

    CABINET CODE: BBCL (CSBBCL will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 36″ to 48″ in 1/16″ increments
    Height: 31.5″ to 42″ in 1/16″ increments
    Depth: 12″, 15″, 18″, 21″, 24″, 27″ and 30″ only.

    TO ORDER: Indicate BBCL + width + height. (i.e. BBCR3934.5 for a 39″ W x 34.5″ H cabinet). Specify the functional area (between 12″ and 21″). This will determine your blind opening area. Upright center stile is always 6″

    DESCRIPTION: Blind corner cabinet with the blind area on the LEFT side. Overall cabinet size is the actual width specified (NOTE: this is different than Conestoga’s old BBC cabinet where it was pulled from the corner. If you need to pull the cabinet from corner to provide space, you must calculate the cabinet size you need and order the cabinet in that size). full overlay cabinets use 1/2″ overlay hinges! Minimum exposed blind amount is 2.5″ to allow for adequate clearance for adjacent door/drawer front function. Excessive projection of hardware may require a greater blind area. Design and install accordingly and be careful of properly engineering clearance around appliances as they project more than cabinets will!

  • Blind Corner Cabinet Right

    Blind Corner Cabinet Right

    CABINET CODE: BBCR (CSBBCR will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 36″ to 48″ in 1/16″ increments
    Height: 31.5″ to 42″ in 1/16″ increments
    Depth: 12″, 15″, 18″, 21″, 24″, 27″ and 30″ only.

    TO ORDER: Indicate BBCR + width + height. (i.e. BBCR3934.5 for a 39″ W x 34.5″ H cabinet). Specify the functional area (between 12″ and 21″). This will determine your blind opening area. Upright center stile is always 6″

    DESCRIPTION: Blind corner cabinet with the blind area on the RIGHT side. Overall cabinet size is the actual width specified (NOTE: this is different than Conestoga’s old BBC cabinet where it was pulled from the corner. If you need to pull the cabinet from corner to provide space, you must calculate the cabinet size you need and order the cabinet in that size). full overlay cabinets use 1/2″ overlay hinges! Minimum exposed blind amount is 2.5″ to allow for adequate clearance for adjacent door/drawer front function. Excessive projection of hardware may require a greater blind area. Design and install accordingly and be careful of properly engineering clearance around appliances as they project more than cabinets will!

  • Base Full Door Blind Corner Cabinet Right

    Base Full Door Blind Corner Cabinet Right

    CABINET CODE: BFDBCR (CSBFDBCR will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 36″ to 48″ in 1/16″ increments
    Height: 31.5″ to 42″ in 1/16″ increments
    Depth: 12″ to 30″ in 1/16″ increments

    TO ORDER: Indicate BFDBCR + width + height. (i.e. BFDBCR3934.5 for a 39″ W x 34.5″ H cabinet). Specify the functional area (between 12″ and 21″). This will determine your blind opening area. Upright center stile is always 6″

    DESCRIPTION: Blind corner cabinet with the blind area on the RIGHT side. Overall cabinet size is the actual width specified (NOTE: this is different than Conestoga’s old BBC cabinet where it was pulled from the corner. If you need to pull the cabinet from corner to provide space, you must calculate the cabinet size you need and order the cabinet in that size). full overlay cabinets use 1/2″ overlay hinges! Minimum exposed blind amount is 2.5″ to allow for adequate clearance for adjacent door/drawer front function. Excessive projection of hardware may require a greater blind area. Design and install accordingly and be careful of properly engineering clearance around appliances as they project more than cabinets will!

  • Base Full Door Blind Corner Cabinet Left

    Base Full Door Blind Corner Cabinet Left

    CABINET CODE: BFDBCL (CSBFDBCL will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 36″ to 48″ in 1/16″ increments
    Height: 31.5″ to 42″ in 1/16″ increments
    Depth: 12″ to 30″ in 1/16″ increments

    TO ORDER: Indicate BFDBCL + width + height. (i.e. BFDBCL3934.5 for a 39″ W x 34.5″ H cabinet). Specify the functional area (between 12″ and 21″). This will determine your blind opening area. Upright center stile is always 6″

    DESCRIPTION: Blind corner cabinet with the blind area on the LEFT side. Overall cabinet size is the actual width specified (NOTE: this is different than Conestoga’s old BBC cabinet where it was pulled from the corner. If you need to pull the cabinet from corner to provide space, you must calculate the cabinet size you need and order the cabinet in that size). full overlay cabinets use 1/2″ overlay hinges! Minimum exposed blind amount is 2.5″ to allow for adequate clearance for adjacent door/drawer front function. Excessive projection of hardware may require a greater blind area. Design and install accordingly and be careful of properly engineering clearance around appliances as they project more than cabinets will!

Base Cabinets – Angled/End of Run

Transition cabinets allow you to soften the hard edges of your kitchen, add interesting elements to your design, smooth the transition from deep cabinets to shallow, or just create a more open feel. Take a look at our offering below.

  • Base Angle End Cabinet

    Base Angle End Cabinet

    CABINET CODE: BAE  (CSBAE will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 24″ Only
    Height: 31.5″ to 42″ in 1/16″ increments
    Depth: 24″ Only

    TO ORDER: Indicate BAE + width + height. (i.e. BAE2434.5  for a 24″ W x 34.5″ H cabinet). If depth other than standard 24″ is required, note as special instruction.

    DESCRIPTION: Double angle cabinet, intended to act as ‘end of run’ cabinet, to soften hard edges. Perfect near doorways by allowing cleaner ingress/egress.

  • Base End Angle (Left/Right) Cabinet

    Base End Angle (Left/Right) Cabinet

    CABINET CODE: BAE(L/R)  (CSBAE(L/R) will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 12″ Only
    Height: 31.5″ to 42″ in 1/16″ increments
    Depth: 24″ Only

    TO ORDER: Indicate BAEL or R + width + height. (i.e. BAEL2434.5  for a left angled, 24″ W x 34.5″ H cabinet).

    DESCRIPTION: Angle cabinet, intended to act as ‘end of run’ cabinet, to soften hard edges. Perfect near doorways by allowing cleaner ingress/egress.

Base Cabinets - Shallow

Shallow Base Cabinets are ideal on the back of islands and peninsulas, or with doors deleted and the matching interior option selected, as an open base bookcase. Check out our selection below.

  • Base Full Door Cabinet – Wall Depth, Double Doors

    Base Full Door Cabinet – Wall Depth, Double Doors

    CABINET CODE: BWD  (CSBFDCS will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 27″ to 48″ in 1/16″ increments
    Height: 10″ to 48″  in 1/16″ increments
    Depth: 5.5″ to 12.5″ in 1/16″ increments

    TO ORDER: Indicate BWD + width + height. (i.e. BWD3034.5 for a 30″ W x 34.5″ H cabinet). If depth other than standard 12.5″ is required, note as special instruction.

    DESCRIPTION: Base cabinet, with full doors, and upright center divider. (Note: heights 10″ to 22″ H get no shelves. Heights 22-1/16″ to 28″ H get 1 shelf. Heights 28-1/16″ to 40″ H get 2 shelves. Heights over 40″ H get 3 shelves).

  • Base Full Door Cabinet – Wall Depth, Butt Doors

    Base Full Door Cabinet – Wall Depth, Butt Doors

    CABINET CODE: BWD_BD  (CSBFD will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 24″ to 36″ in 1/16″ increments
    Height: 10″ to 48″  in 1/16″ increments
    Depth: 5.5″ to 12.5″ in 1/16″ increments

    TO ORDER: Indicate BWD + width + height +BD. (i.e. BWD3034.5BD for a 30″ W x 34.5″ H cabinet). If depth other than standard 12.5″ is required, note as special instruction.

    DESCRIPTION: Base cabinet, with Butt doors. (Note: heights 10″ to 22″ H get no shelves. Heights 22-1/16″ to 28″ get 1 shelf. Heights 28-1/16″ to 40″ get 2 shelves. Heights over 40″ get 3 shelves).

  • Base Full Door Cabinet – Wall Depth, Single Door

    Base Full Door Cabinet – Wall Depth, Single Door

    CABINET CODE: BWD  (CSBFD will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 9″ to 24″ in 1/16″ increments
    Height: 10″ to 48″  in 1/16″ increments
    Depth: 5.5″ to 12.5″ in 1/16″ increments

    TO ORDER: Indicate BWD + width + height. (i.e. BWD1834.5 for a 18″ W x 34.5″ H cabinet). If depth other than standard 12.5″ is required, note as special instruction.

    DESCRIPTION: Base cabinet, with full door. (Note: heights 10″ to 22″ H get no shelves. Heights 22-1/16″ to 28″ get 1 shelf. Heights 28-1/16″ to 40″ H get 2 shelves. Heights over 40″ H get 3 shelves).

Base Cabinets – Double Entry (2 Sided)

Double entry cabinets create valuable storage for islands and peninsulas where access from both sides of the cabinet is critical. Browse our selection below and click a cabinet to see its full details.

  • Base Double Entry w/Butt Doors, Single Drawer

    Base Double Entry w/Butt Doors, Single Drawer

    CABINET CODE: BDE_BD  (CSBDE will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 24″ to 36″ in 1/16″ increments
    Height: 31.5″ to 42″ in 1/16″ increments
    Depth: 12″, 15″, 18″, 21″, 24″, 27″, and 30″ deep Only. (Note: 12″, 15″, 27″, and 30″ deep available with Blum Tandem soft close drawer glides ONLY).

    TO ORDER: Indicate BDE + width + height +BD. (i.e. BDE3034.5BD  for a 30″ W x 34.5″ H cabinet). If depth other than standard 24″ is required, note as special instruction. (Note: when ordering 24″ W version, a single door option is available, thus please specify as special instruction).

    DESCRIPTION: Base cabinet, with Butt doors, which is accessible from both sides. Single drawer, which is accessible from one side only, other drawer front is false. (Note: when height is changed from standard 34.5″ H, drawer height remains fixed at 5″ H).

  • Base Double Entry, Double Door w/Single Drawer

    Base Double Entry, Double Door w/Single Drawer

    CABINET CODE: BDE  (CSBDE2D1D will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 27″ to 36″ in 1/16″ increments
    Height: 31.5″ to 42″ in 1/16″ increments
    Depth: 12″, 15″, 18″, 21″, 24″, 27″, and 30″ deep Only. (Note: 12″, 15″, 27″, and 30″ deep available with Blum Tandem soft close drawer glides ONLY).

    TO ORDER: Indicate BDE + width + height. (i.e. BDE3034.5  for a 30″ W x 34.5″ H cabinet). If depth other than standard 24″ is required, note as special instruction. (Note: when ordering 24″ W version, a single door option is available, thus please specify as special instruction).

    DESCRIPTION: Base cabinet, with double doors/upright center divider, which is accessible from both sides. Single drawer, which is accessible from one side only, other drawer front is false. (Note: when height is changed from standard 34.5″ H, drawer height remains fixed at 5″ H).

  • Base Double Entry Cabinet, Double Doors and Drawers

    Base Double Entry Cabinet, Double Doors and Drawers

    CABINET CODE: BDE  (CSBDECS will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 30″ to 48″ in 1/16″ increments
    Height: 31.5″ to 42″ in 1/16″ increments
    Depth: 12″, 15″, 18″, 21″, 24″, 27″, and 30″ deep Only. (Note: 12″, 15″, 27″, and 30″ deep available with Blum Tandem soft close drawer glides ONLY).

    TO ORDER: Indicate BDE + width + height. (i.e. BDE4234.5  for a 42″ W x 34.5″ H cabinet). If depth other than standard 24″ is required, note as special instruction. (Note: when ordering 24″ W version, a single door option is available, thus please specify as special instruction).

    DESCRIPTION: Base cabinet, with double doors/upright center divider, accessible from both sides. Two drawers, which are accessible from one side only, other drawer fronts are false. (Note: when height is changed from standard 34.5″ H, drawer height remains fixed at 5″ H).

Base Cabinets - Drawer/Door Combination

Ideal for bake centers or islands, these cabinets offer a variety of storage options all in one cabinet! Accessorize with cutlery dividers and pull out trays and you have yourself one do-it-all cabinet! Take a look at each and find one that works for you!

  • Base Combo Three Drawer Left or Right w/Butt Doors

    Base Combo Three Drawer Left or Right w/Butt Doors

    CABINET CODE: BC3D(L/R)_BD  (CSBC3D(L/R) will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 24″ to 36″ in 1/16″ increments
    Height: 31.5″ to 42″ in 1/16″ increments
    Depth: 12″, 15″, 18″, 21″, 24″, 27″, and 30″ deep Only.

    TO ORDER: Indicate BC3DL or + width + height + BD. (i.e. BC3DR3034.5BD  for a right version, 30″ W x 34.5″ H cabinet). If depth other than standard 24″ is required, note as special instruction.

    DESCRIPTION: Base cabinet, with combination drawers above, and Butt doors below. Please note, left version has the large drawer to the left, while right version has the large drawer to right (as pictured). (Note: when height is changed from standard 34.5″ H, only lower door area height changes. Drawer openings remain fixed at 5″ H and 11.5″ H respectively).

  • Base Combo Three Drawer Left or Right w/Center Stile

    Base Combo Three Drawer Left or Right w/Center Stile

    CABINET CODE: BC3D(L/R)  (CSBC3D(L/R)CS will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 27″ to 48″ in 1/16″ increments
    Height: 31.5″ to 42″ in 1/16″ increments
    Depth: 12″, 15″, 18″, 21″, 24″, 27″, and 30″ deep Only.

    TO ORDER: Indicate BC3DL or R + width + height. (i.e. BC3DR3034.5  for a right version, 30″ W x 34.5″ H cabinet). If depth other than standard 24″ is required, note as special instruction.

    DESCRIPTION: Base cabinet, with combination drawers above, and double doors with center divider below. Please note, left version has the large drawer to the left, while right version has the large drawer to right (as pictured). (Note: when height is changed from standard 34.5″ H, only lower door area height changes. Drawer openings remain fixed at 5″ H and 11.5″ H respectively).

  • Base Combo Four Drawer

    Base Combo Four Drawer

    CABINET CODE: BC4D  (CSBC4DCS will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 36″ to 48″ in 1/16″ increments
    Height: 31.5″ to 42″ in 1/16″ increments
    Depth: 12″, 15″, 18″, 21″, 24″, 27″, and 30″ deep Only.

    TO ORDER: Indicate BC4D + width + height. (i.e. BC4D3634.5  for a 36″ W x 34.5″ H cabinet). If depth other than standard 24″ is required, note as special instruction.

    DESCRIPTION: Base cabinet, with combination drawers above, and double doors/upright center divider below. (Note: when height is changed from standard 34.5″ H, only lower door area height changes. Drawer openings remain fixed at 5″ H and 11.5″ H respectively. When width changes, drawer opening widths are equal).

  • Base 2 Door 5 Drawer

    Base 2 Door 5 Drawer

    CABINET CODE: B2D5D  (CSB2D5DCS will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 48″ to 96″  in 1/16″ increments
    Height: 31.5″ to 34.5″ in 1/16″ increments
    Depth: 12″, 15″, 18″, 21″, 24″, 27″, and 30″ deep Only.

    TO ORDER: Indicate B2D5D + width + height. (i.e. B2D5D6034.5  for a 60″ W x 34.5″ H cabinet). If depth other than standard 24″ is required, note as special instruction.

    DESCRIPTION: Base cabinet, with 3 equal drawers above and drawer stack in the middle. 48″ to 72″ wide cabinets use a single door on left and right. Cabinets 60″ to 72″ can have either single doors or double doors. Cabinets 72″ to 96″ use double doors only. Note: when height is changed from standard 34.5″ H, only lower door area heights changes. Top drawer openings remain fixed at 5″ H and 11.5″ H respectively. When width changes, all openings change and remain equal. This cabinet uses a full top (not spreaders) and upright partitions between the openings.

    Important note: For inset cabinets, the upright dividers require that the assembler use shims to mount the drawer glides as the mounting brackets will not fit behind the face frame. Speak with a sales rep for more details.

Base Cabinets – Appliance

These cabinets are designed to accommodate the now widely embraced idea of putting microwaves within easy reach of folks of any stature. Many microwaves are now 'drawer' appliances and these cabinets are designed to be trimmed to accept any microwave you find.

  • Base Under Counter Microwave

    Base Under Counter Microwave

    CABINET CODE: BUCM (CSBUCM will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 24″ to 36″ in 1/16″ increments
    Height: 31.5″ to 42″ in 1/16″ increments
    Depth: 12″, 15″, 18″, 21″, 24″, 27″, and 30″ deep Only.

    TO ORDER: Indicate BUCM + width + height. (i.e. BUCM3034.5  for a 30″ W x 34.5″ H cabinet). If depth other than standard 24″ is required, note as special instruction.

    DESCRIPTION: Base cabinet, with ‘set in place’ Microwave (MW) opening above the drawer. (Note: for a standard 34.5″ H cabinet, the top MW opening height is 15.75″ H. As cabinet height changes, upper MW opening height changes. Lower drawer opening height fixed at 10.25″ H). If you desire the upper MW opening to have the same interior (finish, species, etc) as the exterior of the cabinet, then specify the Matching Interior Option.

  • Built-In Under Counter Microwave

    Built-In Under Counter Microwave

    CABINET CODE: BIUCM (CSBIUCM will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 24″ to 36″ in 1/16″ increments
    Height: 31.5″ to 42″ in 1/16″ increments
    Depth: 12″, 15″, 18″, 21″, 24″, 27″, and 30″ deep Only.

    TO ORDER: Indicate BIUCM + width + height. (i.e. BIUCM3034.5  for a 30″ W x 34.5″ H cabinet). If depth other than standard 24″ is required, note as special instruction.

    DESCRIPTION: Base cabinet, with built-in Microwave (MW) opening above the drawer. (Note: for a standard 34.5″ H cabinet, the top MW opening height is 13″ H, and the MW opening width is 6″ less than cabinet width. As cabinet height changes, upper MW opening height changes. MW opening can be field trimmed 5″ in height and 3″ in width. Lower drawer opening height fixed at 8″ H).

  • Base Cooktop Cabinet

    Base Cooktop Cabinet

    CABINET CODE: BCT (CSBCT will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 30″ to 42″ in 1/16″ increments
    Height: 31.5″ to 42″ in 1/16″ increments
    Depth: 12″, 15″, 18″, 21″, 24″, 27″, and 30″ deep Only.

    TO ORDER: Indicate BCT + width + height. (i.e. BCT3034.5  for a 30″ W x 34.5″ H cabinet). If depth other than standard 24″ is required, note as special instruction.

    DESCRIPTION: Base cabinet, with Butt doors above a single drawer. (Note: when height is changed from standard 34.5″ H, only the top opening changes. Drawer opening height fixed at 11.5″ H).

  • Base Cook Top Two Drawer

    Base Cook Top Two Drawer

    CABINET CODE: BCT2D (CSBCT2D will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 36″ to 48″ in 1/16″ increments
    Height: 34.5″ only
    Depth: 24″, 27″, and 30″

    TO ORDER: Indicate BCT2D + width + height. (i.e. BCT2D3634.5  for a 36″ W x 34.5″ H cabinet). If depth other than standard 24″ is required, note as special instruction.

    DESCRIPTION: Base cabinet with two equal height drawers designed for countertop mounted cooktops.  Cabinet back recessed 3″ to accommodate and conceal supply lines.  Drawer depth is 3″ less due to recessed back.  Top drawer box is 8″ high to accommodate appliance housing, bottom drawer box is 10″

  • Base Range Three Drawer

    Base Range Three Drawer

    CABINET CODE: BR3D (CSBR3D will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 30″ to 39″ in 1/16″ increments
    Height: 31.5″ to 34.5″ in 1/16″ increments
    Depth: 12″, 15″, 18″, 21″, 24″, 27″, and 30″ deep Only.

    TO ORDER: Indicate BR3D + width + height. (i.e. BR3D3034.5  for a 30″ W x 34.5″ H cabinet). If depth other than standard 24″ is required, note as special instruction.

    DESCRIPTION: Base cabinet, with false top drawer, and 2 operable lower drawers. (Note: as cabinet height changes, only lower opening height changes. Top and middle openings fixed at 5″ H and 8″ H respectively).

  • Base Cook Top Four Drawer

    Base Cook Top Four Drawer

    CABINET CODE: BCT4D (CSBCT4D will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 36″ to 60″ in 1/16″ increments
    Height: 34.5″ only
    Depth: 24″, 27″, and 30″

    TO ORDER: Indicate BCT4D + width + height. (i.e. BCT4D3634.5  for a 36″ W x 34.5″ H cabinet). If depth other than standard 24″ is required, note as special instruction.

    DESCRIPTION: Base cabinet with four equal height drawers designed for countertop mounted cooktops.  Cabinet back recessed 3″ to accommodate and conceal supply lines.  Drawer depth is 3″ less due to recessed back.  Top drawer box is 8″ high to accommodate appliance housing, bottom drawer box is 10″

  • Base Range Top Two Drawer

    Base Range Top Two Drawer

    CABINET CODE: BRT2D (CSBRT2Dwill appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 36″ to 48″ in 1/16″ increments
    Height: 34.5″ only
    Depth: 24″, 27″, and 30″ deep Only.

    TO ORDER: Indicate BRT2D + width + height. (i.e. BRT2D3634.5  for a 36″ W x 34.5″ H cabinet). If depth other than standard 24″ is required, note as special instruction.

    DESCRIPTION: Base cabinet for a Range top, with double drawers below. Cabinet back is recessed 3″ to allow for gas feeds, etc. Note that drawer box depth will, therefore, be 6″ less than overall cabinet depth. Both drawer boxes are 8″ high and cannot be changed. Standard appliance opening is 6″ high, but opening height is customizable from 5″ to 8″ in 1/16″ increments. Includes full floor to support the appliance.

  • Base Range Top Four Drawer

    Base Range Top Four Drawer

    CABINET CODE: BRT4D (CSBRT4Dwill appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 36″ to 60″ in 1/16″ increments
    Height: 34.5″ only
    Depth: 24″, 27″, and 30″ deep Only.

    TO ORDER: Indicate BRT4D + width + height. (i.e. BRT4D3634.5  for a 36″ W x 34.5″ H cabinet). If depth other than standard 24″ is required, note as special instruction.

    DESCRIPTION: Base cabinet for a Range top, with 4 drawers below. Cabinet back is recessed 3″ to allow for gas feeds, etc. Note that drawer box depth will, therefore, be 6″ less than overall cabinet depth. Both drawer boxes are 8″ high and cannot be changed. Standard appliance opening is 6″ high, but opening height is customizable from 5″ to 8″ in 1/16″ increments. Includes full floor to support the appliance.

Base Cabinets - Decorative

These open shelf cabinets are designed to create open storage solutions where you can decorate and accessorize. They very popular in islands as a way to make them look more like furniture.

  • Base Open Unit

    Base Open Unit

    CABINET CODE: BOU (CSBOU will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 15″ to 48″ in 1/16″ increments
    Height: 31.5″ to 48″ in 1/16″ increments
    Depth: 5.5″ to 30″ in 1/16″ increments

    TO ORDER: Indicate BOU + width + height. (i.e. BOU3034.5  for a 30″ W x 34.5″ H cabinet). If depth other than standard 24″ is required, note as special instruction. Available with optional valance designs on top and bottom rails (see pg. 11.3 for valance options – Straight, Roman Arch, Classic Arch, Traditional Arch or Elegant Arch). Straight (no arch) 1-1/2″ top rail will be used unless specified. Bottom rail will be 1.5″ and will receive a toe kick unless Flush toe option (with or without an arch cutout type) is specified in special instructions.

    DESCRIPTION: Base cabinet open shelf and optional shaped top and/or bottom rail.  Available with optional valance designs on top and bottom rails (see pg. 11.3 for valance options – Straight, Roman Arch, Classic Arch, Traditional Arch or Elegant Arch).

  • Base Pet Unit

    Base Pet Unit

    CABINET CODE: BPU (CSBPU will appear on your quote if your cabinet is not one of the standard sizes. CS = Custom Sized)

    SIZES:
    Width: 30″ to 48″ in 1/16″ increments
    Height: 31.5″ to 48″ in 1/16″ increments
    Depth: 18″ to 24″ in 1/16″ increments

    TO ORDER: Indicate BPU + width + height. (i.e. BOU3034.5  for a 30″ W x 34.5″ H cabinet). If depth other than standard 24″ is required, note as special instruction. Available with optional valance designs on top and bottom rails (see pg. 11.3 for valance options – Straight, Roman Arch, Classic Arch, Traditional Arch or Elegant Arch). Straight (no arch) 1-1/2″ top rail will be used unless specified. Bottom rail will be 2.5″ (includes bed rail) and will receive a toe kick unless Flush toe option (with or without an arch cutout type) is specified in special instructions.

    DESCRIPTION: Base cabinet open shelf and optional shaped top and/or bottom rail.  Available with optional valance designs on top and bottom rails (see pg. 11.3 for valance options – Straight, Roman Arch, Classic Arch, Traditional Arch or Elegant Arch). Bottom rail is 6-1/2″ high for all valance designs. 1″ rail extension provides a lip to keep pet bed in place (pet bed not included).

Sours: https://www.cabinetjoint.com/rta-cabinets/base-cabinets/
  1. Mymathlab chapter 2 test answers
  2. Corvallis homes for sale
  3. Bali industrial pipe curtain rod
  4. Uber black in las vegas

Everybody knows about kitchen cabinets as they are the most prominent element in a kitchen, most people call them cupboards. Kitchen cabinets eat up the space of your kitchen that is why it is very important for the kitchen designer to first consider what type of kitchen cabinets and how much they are going to use in a kitchen. To start off, we need to know the basic types of the kitchen cabinets.

Base Cabinets is also known as counter cabinets. This is the type of kitchen cabinets that stand on the floor and sit under the countertop. A standard base cabinet depth is 24 inches or 61 cm.  However, due to the refrigerators getting deeper, it is normal to have the base cabinets’ depth up to 36 inches or 92 cm. In general, base cabinets’ depth can go from 16 inches to 36 inches and 34.5 to 36 inches in height. This allows plenty of storage from the spacious pots and pans to the small items like fork and spoon inside the drawers.

Wall Cabinets is also known as overhead cabinets. This is the type of kitchen cabinets which refers to the top cabinetry that is mounted in a wall suspended above the counter space. The standard depth for wall cabinet is 12 to 13 inches though most people gravitate to wall cabinets of 14 to 16 inches deep. When this type of kitchen cabinets includes a microwave, the depth increased to 15 to 18 inches accommodating the standard microwave size. Wall cabinets placed over the refrigerator are deeper with a standard of 24 inches and can go up to 36 inches. Its standard height is 30 inches.

Tall Cabinets is also known as pantry cabinets. This is the type of kitchen cabinets that sit on the floor and extending to the ceiling. Tall cabinets provide ample storage and usually range from 84 to 96 inches in height. The depths for tall cabinets are similar to the base cabinets. The standard is 24 inches deep but it can also go deeper up to 36 inches.

Now we know the basic type of kitchen cabinets, we will look at its popular materials.

Nowadays, the most common and affordable materials for kitchen cabinets are called “thermofoil”. It is made of a flexible vinyl material glued over a medium-density fiberboard (MDF) by applying extreme heat. MDF is an engineered wood like particle board, but are more dense and durable. It is made of wood fibers and resin that is dried and pressed by a specialized machine producing an accurate and smooth surface. Due to the perfectly flat surface of an MDF board, it is a good material for kitchen cabinets.

Another popular but more upgraded material for kitchen cabinet is plywood. Plywood has been used for a long time in cabinetry. Plywood is engineered wood made of wood sheets pressed together. It is very dense and has a higher resistance to water. Kitchen cabinets made of plywood are ideal for cabinets placed under the sink or those highly exposed to liquid. In terms of cost, plywood kitchen cabinets are more expensive than those made of MDF.

The most less cost material for cabinets is particle boards. It is also an engineered wood made of wood chips and resin but it is less dense than an MDF. It is also called Low-Density Fiberboard or chipboard. Due to the nature of its density, it has a lesser resistance to water. You can choose to use this in cabinets that are not exposed to liquid and heat. It is economical material and most affordable common material in the market.

The most expensive is kitchen cabinets made of wood or solid wood. Unlike the boards mentioned above, solid wood kitchen cabinets are not engineered. Imagine engineered wood as recycled materials (wood sheets, wood chips, wood scrap, sawdust, etc) compacted together to make a wood panel. Solid wood does not go through that process. They are smoothed and curved wood and they are very durable and dense. Economically, they are costly and rare. As the price tag is hefty, it is not common in ready-to-assemble (RTA) kitchen cabinets and mostly found under customized kitchen cabinets category.

If you are looking for cabinets, we at Casa amazona are the people to call. We have a wide range of cabinet choices with every design and style to choose from. We are proud dealers of quality brand cabinets such as Diamond, Homecrest, Huntington Brass, Omega Cabinetry, Aristokraft Cabinetry, Waypoint Living Spaces, Crystal, Zline Kitchen and Bath, and Decora. You can visit us at www.casaamazona.com and we will definitely help you find the cabinets doors that will suit your budget and needs. Our showroom is located at 45331 Division St. Lancaster, CA 93535. You can also call us toll-free at (866) 960-9556 or email us at [email protected]

Don’t forget to follow us on:

Facebook: www.facebook.com/casaamazona/

Pinterest: www.pinterest.com/casaamazona/

Houzz: https://www.houzz.com/pro/casaamazona/

Youtube Channel: https://www.youtube.com/channel/UCx3rdii2l_f2c4hQE8Q7Nng

Sours: https://casaamazona.com/types-and-make-of-kitchen-cabinets/
Don't Buy Kitchen Cabinets Without Watching This First!

Home >> Cabinet >> Base Cabinet Organizers >> Rev A Shelf Base Cabinet Organizers

 (View all from Rev A Shelf)

Heavy-Gauge Pull-Out Wire Basket

Satin Nickel

$52.36 - $114.54

No Sales Tax, Except CT

Product Reviews

5 9

Jump to:    Dimensions   |    Optional Accessories   |    More from Rev-A-Shelf Wire Collection   |    Related Items



    Closet Organization Product Video

    Closet Organization Product Video



  • - RAS Closet
  • Wire Baskets
  • Heavy-gauge construction - Chrome, Satin Nickel or Oil Rubbed Bronze finish
  • 16" depth
  • Available in 7", 11" or 18" basket height and 18", 24" or 30" width
  • Baskets are sold individually
  • Full-extension slides
  • Limited Lifetime Manufacturers Warranty
  • Optional Cloth Liners


These Rev-A-Shelf 16" deep Heavy-Gauge Pull-Out Wire Basket Drawers are a perfect addition to any are of your home for storage and organization. These basket drawers are sold individually and are constructed from heavy-gauge wire with your choice of a Chrome, Satin Nickel or Oil Rubbed Bronze finish. Available in 7", 11" or 18" basket heights, and 18", 24" or 30" basket widths, these wire baskets are sure to accommodate your shelving needs. The full-extension slides smoothly extend the basket out of the cabinet completely for easy access to all materials in the storage bin. Assembly is required.


(W = side to side) (D = front to back) (H = top to bottom)

Available Widths: 18", 24, 30"
Avalable Depths: 16" D
Available Heights: 7", 11" or 18"



    Ships via UPS/FedEx Ground



Great!
by: Peter Rosenblum   ✔Verified Buyer      from: Palo Alto, CA      on: November 4, 2020
 Am using them as under the bed storage and they work just great! Easy to install and use!


Excellent product and service!
by: Brian Reynolds   ✔Verified Buyer      from: Brighton, Ut      on: September 8, 2020
 


Perfect fit
by: Bob The Builder   ✔Verified Buyer      from: Louisville, KY      on: August 25, 2020
 Great basket & awesome pricing. Fast delivery too. Easy to install


Smooth glides & easy to install
by: Bob The Builder   ✔Verified Buyer      from: Louisville, KY      on: August 25, 2020
 Great basket & awesome pricing. Fast delivery too


Excellent product
by: Marty   ✔Verified Buyer      from: Sheldon, -      on: February 6, 2019
 Very well built product. Fast shipping. Perfect for our needs also ordered the under shelve mounting brackets only downside was the mounting screws supplied they were cheap useless and wrong size. 1/4 inch wood screws will not support a basket with this wght rating also needed metric machine bolts and they supplied wood screws. But still very happy with this item


This the third shelf I've gotten.
by: R collette   ✔Verified Buyer      from: Washington, DC      on: April 18, 2018
 This is a very shallow shelf. And was the only manufacture that I found with the size. Very good product!.


Very good quality numerus ball bearings on track. Smooth as butter. Very satisfied
by: Tim matlock   ✔Verified Buyer      from: Detroit, Mi      on: December 8, 2015
 


Perfect
by: Bob vincent   ✔Verified Buyer      from: Quarryville, Pa      on: June 11, 2015
 I needed this unit to finish a kitchen job. When it arrived I was impressed with the product. It had wire construction heavy duty glides and was heavily chromed. When I need more this will absolutely be my choice.


Great product. Excellent price.
by: Cheryl   ✔Verified Buyer      from: -, KY      on: October 18, 2012
 This basket was exactly what we were looking for, for our remodeling project! Excellent price too. Thank you!



Hi, 30" includes the width of the sliding mechanism also. Is it correct? My closets are 30" wide and 15 to 22 inch deep Thanks. Love Jay Shah   - Asked about product RAS-CB-301607SN
 The width provided is the overall width, and this includes the slides for the 30''W.
 - Answered on May 11, 2021
 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0)

Can you supply the weight allowance for this product? Max weight suggested   - Asked about product RAS-CB-241607CR
 The slides for RAS-CB-241607CR are heavy duty and weight rated for up to 100lbs.
 - Answered on April 13, 2021
 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0)

I am interested in this type of pull out shelf but wonder if I can get it in bottom (base) mount instead of side mount I need 7 or 8 of them in the chrome finish   - Asked about product RAS-CB-241607CR
 Unfortunately, RAS-CB-241607CR is only available with side mounting slides.
 - Answered on April 13, 2021
 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0)

Are these wire baskets mounted on the side or base? Was wondering if I could put two of these in a 36” wide wall cabinet   - Asked about product RAS-CB-181611CR
 These wire baskets are side-mounted. You will need a divider, if you are are going to put them side by side.
 - Answered on April 21, 2020
 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0)

My shelf is 16 in deep and 24 3/8 in wide.. Will this fit? Wondering how much space the brackets use up? or not?   - Asked about product RAS-CB-241611ORB
 The dimensions are overall dimensions, so they include the slides. You need a minimum cabinet opening of 24" Width x 16" Depth x 7" height to fit that model. If you have a frameless cabinet, you need an opening of 24-1/8" W x 16-1/4" D x 7-1/8" H.
 - Answered on February 2, 2016
 100% of 1 people found this useful. Was this useful to you? Yes (1) | No (0)


    This item(s) is also sometimes listed under the following manufacturer numbers:

    Rev A ShelfRev A Shelf
    CB-181607CR, CB-181607ORB-1, CB-181607SN, CB-181611CR, CB-181611ORB1, CB-181611SN, CB-181618CR, CB-181618ORB, CB-181618SN, CB-241607CR, CB-241607ORB, CB-241607SN, CB-241611CR, CB-241611ORB, CB-241611SN, CB-241618CR, CB-241618ORB, CB-241618SN-1, CB-301607CR, CB-301607ORB


Sours: https://www.kitchensource.com/cabinet-organizers/rv-cb-1816.htm

Cabinets deep kitchen 16 inches

And it was at that moment that new signs of jealousy struck him. He wanted to shout after his leaving wife to straighten her swimwear, but as if swallowing his tongue, he himself watched. With a sinking heart as his beloved moved her long legs along the sand, as if on a catwalk, wagging her amazing ass.

Reduced depth base cabinet

Nadia gasped. Katya twisted it a little, then pulled it out and tried again. This time he went deeper, but still did not fully pass.

Similar news:

At first, Marina commented very harshly. But then it subsided. The girls enjoyed all the pleasures. One helped the other to masturbate with her fingers, while doing the same herself.



7133 7134 7135 7136 7137