Att fiber self install

Att fiber self install DEFAULT
gettyimages

When it was first announced in May that AT&T was spinning off WarnerMedia into a combined venture with Discovery, AT&T CEO John Stankey implied it would give the company greater ability to focus on expanding its fiber footprint. In fact, Stankey went further and said the move would allow AT&T to zero in on "the single goal of offering the best fixed-broadband service in the market."

So, where does that put AT&T right now? If you're living in one of the 21 states where AT&T provides internet service and you're serviceable for one of the company's fiber plans, then you're in a perfect spot -- AT&T's fiber internet offers a great connection at a terrific value. However, the majority of customers within AT&T's service area aren't living in homes that are wired for fiber. Instead, AT&T connects those customers using either fixed wireless or a DSL hybrid service. In both cases, that means less value and much slower speeds than what you'll get with fiber. 

Like

  • No contracts required to receive the lowest available price
  • No data caps for any fiber plans
  • Valuable perks and promotional offers

Don't Like

  • Much slower DSL plans are more prevalent than fiber options
  • No way to avoid additional monthly router fees by using your own
  • Data caps enforced on all nonfiber plans

In other words, recommending AT&T internet service really comes down to where you live and what's available at your address. If AT&T fiber is an option, then move it right to the top of your list. But if you're not serviceable for fiber, shop around to see if you can do better than AT&T's fixed wireless or DSL solutions.

AT&T Internet plans and prices

AT&T currently offers three fiber internet plans, none of which come with contracts or data caps. The company tells CNET that those fiber plans -- Internet , Internet and Internet -- are available to just under a third of customers in the company's footprint. The rest of the plans use a DSL/fiber hybrid approach to service the rest of AT&T's customer base, though the addition of DSL infrastructure means that speeds are a lot slower.

Here's your full list of options:

AT&T home internet plans

Plan Max speeds Promo price (first 12 months) Regular monthly cost (after 12 months) Equipment fee Data cap
AT&T Fixed Wireless 10Mbps download, 1Mbps upload $70 $70 $10 modem/router rental (unskippable) GB
AT&T Internet 10 10Mbps download, 1Mbps upload $45 $55 $10 modem/router rental (unskippable) 1TB
AT&T Internet 18 18Mbps download, 1Mbps upload $45 $55 $10 modem/router rental (unskippable) 1TB
AT&T Internet 25 25Mbps download, 2Mbps upload $45 $55 $10 modem/router rental (unskippable) 1TB
AT&T Internet 50 50Mbps download, 10Mbps upload $45 $55 $10 modem/router rental (unskippable) 1TB
AT&T Internet Mbps download, 20Mbps upload $45 $55 $10 modem/router rental (unskippable) 1TB
AT&T Internet (fiber) Mbps download, Mbps upload $35 $55 $10 modem/router rental (unskippable) None
AT&T Internet (fiber) Mbps download, Mbps upload $45 $65 $10 modem/router rental (unskippable) None
AT&T Internet (fiber) Mbps download, Mbps upload $60 $80 $10 modem/router rental (unskippable) None

For most of its serviceable areas, AT&T offers at least three of the above plans. In a few geographic locations, mainly rural or suburban areas, you may only have access to AT&T Internet Basic (not shown in the table above), which features either a 5-megabits-per-second plan or one offering or Mbps. Basic is the right word for it and perhaps too generous.

At one point there were five AT&T trucks and technicians at my house installing fiber-optic broadband. It's been smooth sailing since then.

Here are the internet connection types AT&T offers

There are a couple of potential outcomes when you seek to sign up for AT&T's internet service. If you see any of the , or Mbps speed tiers offered at your address, then you have access to AT&T's fiber internet service, which uses % fiber technology. Fiber connections are symmetrical by design, which means that your upload speeds will be just as fast as your downloads, unlike DSL, cable and other modes of internet. That's particularly useful for videoconferencing, transferring files (for those of us working and schooling from home) and online gaming.

Outside of the three fiber plans, most of the rest of AT&T plans are DSL, a hybrid of fiber-optic and copper cable. This means speeds are much slower than a pure fiber connection, and you won't see upload speeds that are as high as your download speeds. 

In addition to AT&T's fiber and DSL plans, the company offers a fixed wireless plan, which involves installing an antenna and wireless equipment within the home. Speeds won't get much higher than 10Mbps with a connection like that -- it's intended mostly for homes that lack other options for getting online.

According to the most recent report from the Federal Communications Commission, AT&T Internet plans are 30% fiber, 7% fixed wireless and the rest are DSL. That said, the FCC's numbers are out of date (and the data comes with plenty of other flaws, too). 

An AT&T spokesperson wouldn't disclose the most current breakdown of its service plans when we asked, but the company says that its fiber footprint is larger than the FCC's two-year-old data suggests. As we mentioned at the top of the page, AT&T's CEO has doubled down on the company's commitment to fiber expansion.

at-t-coverage-map

AT&T Internet availability

AT&T's internet service area covers 21 states across the country. The list includes Alabama, Arkansas, California, Florida, Georgia, Illinois, Indiana, Kansas, Kentucky, Louisiana, Michigan, Missouri, Mississippi, North Carolina, Nevada, Ohio, Oklahoma, South Carolina, Tennessee, Texas and Wisconsin. You can dig deeper on the AT&T coverage map to uncover the specific cities included within each state.

What to expect from your AT&T internet bill

For the most part, AT&T Internet is straightforward. But there are a few differences from other internet service providers that are worth paying attention to. 

You can't skip the equipment fee

Whereas many ISPs -- including Spectrum, Verizon and Xfinity, among others -- give you the option to avoid a modem or router rental by using your own equipment, you won't be able to escape that charge with AT&T. You have to use the AT&T Wi-Fi Gateway, which adds an extra $10 a month to your bill. However, you're free to disable the router part of that gateway and use a router of your own.

One-time fees

AT&T charges $99 for a full, in-home tech installation. For some addresses, there's no self-install option (you have to go online to find out if you "qualify" for the self-install kit). On the positive side, you'll frequently find online promos where the $99 fee is waived (typically for the higher-speed plans), so keep your eyes peeled for offers like that. If none are available, you could also try asking them to waive it when you're calling to sign up.

If you're struggling to get a signal in the far reaches of your home, AT&T will sell you a Smart Wi-Fi Extender to pair with the gateway -- those will cost you $50 each.

Bring your home up to speed with the latest on automation, security, utilities, networking and more.

No data caps -- at least not with fiber

This is where things get a little squirrelly. For the most part, AT&T Internet plans don't come with data caps. Customers get unlimited data with all fiber plans. That means you won't have to track your data usage for fear of fees or throttling issues once you hit some arbitrary threshold. But there's still a decent chunk of AT&T's geographic footprint where fiber isn't yet available, and in those cases, there is a data allowance. 

Non-fiber AT&T Internet plans (MbpsMbps) have a data cap of 1 terabyte (1, gigabytes). If you go over that monthly limit, you'll incur a $10 charge for each additional 50GB of data that you use, up to a total of $ a month. That's right on par with other major providers who enforce a data cap, including Comcast Xfinity and Cox, but both offer caps that are a bit higher, at around TB (1,GB). Cox also waives all of your overage charges the first month you break the cap -- don't expect a free pass like that from AT&T.

If you think you're likely to surpass AT&T's data allowance, you can upgrade your plan to include unlimited data for an additional $30 a month. Another option is to choose a TV and internet bundle, which would allow you to get unlimited data at no extra charge -- though there's usually a contract involved with any bundling of services.

One last caveat -- the data allowance for AT&T Fixed Wireless Internet is actually GB a month. While the $10 charge for each additional 50GB you use is the same as above, fixed wireless customers can be billed up to a total of $ extra per month for overage fees. That's a recipe for sticker shock, so you'll want to be extra cautious with your data usage if you're a fixed wireless subscriber.

Access to the AT&T Wi-Fi Hot Spot Network is free

AT&T's nationwide network of over 30, hotspots is free to all AT&T Internet customers. This allows you to be connected when you're away from home without using up your mobile data. Check out AT&T's mobile hotspot map to get a sense of where you can find those available locations.

AT&T Internet offers some nice deals and promotions

AT&T likes to run short-term promotions and deals throughout the year. At the time of this writing, one of the main promos offered is a $ AT&T Visa Reward Card for new fiber customers that order online.

If you opt for the company's fastest plan, Internet , AT&T will throw in a free subscription to HBO Max. That's a decent value -- HBO Max regularly costs $15 a month.

isp-customer-satisfaction

AT&T Internet boasts strong customer satisfaction numbers

AT&T crows that "you deserve the best," and the company points to its stellar showing in J.D. Power's US Residential Internet Service Provider Satisfaction Study as evidence that it's delivering. AT&T nabbed the top spot in the North Central and South regions in that study, with an average score of on a 1,point scale. Only Verizon () and Midcontinent () can point to a higher average in the survey, but they each only competed in one region. AT&T locked horns with the competition in three different areas.

AT&T Internet fared just as well with the American Customer Satisfaction Index, which releases a yearly customer satisfaction survey for internet providers. AT&T's score of 71/ was tied with Verizon Fios for the top spot and well ahead of all other competitors and ahead of the industry average of AT&T also saw a jump of just over 4% in its score from the previous year, which was the biggest jump among all providers from to

The ACSI also surveys customer satisfaction with each provider's Wi-Fi equipment, and just like the overall score, AT&T saw a 4-point bump here, too. With a score of 74 out of , AT&T's equipment tied with Verizon for the top spot among all providers. That's a notable bit of reassurance given that AT&T doesn't let you use any other modem in place of its own gateway.

To sum it up

If AT&T's fiber service is an option for your address, it's tough to find a better combination of service and affordability. The catch? AT&T's fiber plans aren't an option for approximately two-thirds of the company's coverage area. All other AT&T plans are fraught with issues not faced by fiber, from slower download speeds to data caps. Simply put, don't hesitate if you can get an AT&T fiber plan, but research your options if only lower speeds are offered in your area.

AT&T Internet FAQs

Does AT&T Internet service require a contract?

No. While the promo price typically expires after your first year of service, you don't have to sign a term agreement to receive that price. 

Is AT&T Internet fast?

The answer to this question always depends on which plans are available in your area. No matter the fastest plan that any provider might offer (say, the 2,Mbps Gigabit Pro plan from Xfinity), it's moot if it isn't available at your address. So, for example, AT&T's Internet plan is plenty fast, but it's not available to all AT&T areas. As of now, AT&T fiber is available to 14 million households across 90 metro areas. The company's goal is to add another 3 million residential and business locations by the end of  

For a third-party perspective on what's fast, the speed-testing website Ookla tracks ISPs based on its scoring system that looks at both download and upload speeds. Using the most recent metrics taken during the second quarter of , AT&T came in fifth place, behind Verizon, Cox, Xfinity and Spectrum (in that order). 

Similarly, AT&T ranks in fifth place when you look at Ookla's Consistency Score -- a different measure showing how often providers deliver broadband speeds to customers. Surprisingly, it wasn't even that close, with AT&T Internet at 77% and the same four providers ahead of them at either 83% or higher. 

Does AT&T offer any low-cost internet options?

Yes. Access from AT&T is an affordable option for eligible households within the 21 states that AT&T services. Internet service up to 25Mbps for $10 a month may be available for limited-income households participating in the Supplemental Nutrition Assistance Program or getting Supplemental Security Income benefits. 

How can I cancel my AT&T Internet?

You can start the process by going to the AT&T Contact Us page. You can cancel your AT&T Internet service at any time without an early termination fee since no contracts are required for service. However, since you get billed on a month-to-month basis, you will not receive a refund or credit if you cancel before the end of your billing cycle. 

Also, pay attention to the small print of some of your promo offers. If you have an internet plan that gets you free HBO Max, for example, you'll lose that access upon cancellation.

Lastly, if you desire to transfer your service, rather than cancel (for a pending move, for example), you can contact an AT&T moving specialist at

Sours: https://www.cnet.com/home/internet/att-internet-review/
att internet self installation guide

Show Some Love


Finally, decided to choose AT&T over countless other internet service providers? Now comes the step to install AT&T Internet service. Either you can choose the professional internet installation service or &#;AT&T Internet Self installation&#;. Standard professional installation is included with every AT&T internet plan but if you do-it-yourself then you can save yourself from the hassle of booking an appointment and waiting through the installation time window. During the Coronavirus outbreak, we are sure you wouldn’t want anyone to visit your home. If you don’t wish to go through the annoying installation guides then just read this article till the end. Here’s how to self install AT&T Internet. 

AT&T Internet Self Installation Guide

Before you go through with anything, you need to keep in mind that if you have a non-digital home phone system, then you have to connect it to a dual-port filter. Simply plug the dual-port into your phone jack then plug your phone into one of the filter’s ports. The other port will be used to connect with your AT&T internet gateway. Follow the steps listed below on how to &#;self install AT&T internet&#; service.

ATT Self Install Step 1:

Connect your Gateway, Your AT&T equipment package comes with color-coded wiring that matches up with the color-coded ports of your AT&T WiFi gateway. This makes the process so much easier than having to find the right port. 

  • Plug the Green data cable into the Green Broadband (DSL) port and your wall jack. If you use a non-digital phone service then you will need a dual-port filter. 
  • Plug the Gray cable into the Gateway’s phone lines 1 & 2 ports and your phone.
  • Plug the Black power cord into any electrical outlet and then to your WiFi Gateway.

if you intend to just use a wired connection and not a wireless one then you have to plug the Yellow Ethernet cord into the Gateway’s yellow Ethernet port and then on your computer. Leave your gateway on for about 10 minutes for it to power up. The broadband and the service line will turn solid green when the WiFi Gateway is ready to work. If the lights don’t turn green, visit the troubleshooting section below. Let’s move onto the second step of the AT&T self-installation guide.

ATT Internet Self Install Step 2

To complete &#;AT&T Internet self install&#;, you need to set-up your WiFi network. On your device or your computer, open the wireless settings section. Select your WiFi name, and enter your 12 character password that you’ll find on the bottom of your WiFi Gateway. Once connected, open your browser and your connection will automatically lead you to the registration page. If registration doesn’t starts automatically then head on to att.com/Uverse. Just follow the registration steps from thereon. 

AT&T Internet Self-Installation Step 3

Customize your settings with the smart home manager application. To complete the AT&T internet self-installation, visit att.com/smarthomemanager to customize your WiFi network and name and password. Then you can start connecting other devices to your network using the customization settings. 

AT&T Fiber Internet Self Installation Guide

AT&T internet comes in two different connections, you can either get the DSL service or the Fiber internet, they have different installation process. Read below for the AT&T Fiber self-installation guide.

Step 1

Connect the AT&T FiberSM Service Box. Your AT&T service box is the device that connects your home to the AT&T internet system. To complete AT&T Fiber internet self-installation, you have to connect it. You can mount it on a wall or place it in the basement or the garage. Remove the cover and connect the following: 

  • Plug the Green fiber connector to the green PON port. Make sure not to look into the end of the Fiber connector as it can cause eye damage.
  • Plug the Red ONT Ethernet cable into the service box Ethernet port.
  • Plug the Black power cord into the service box and an electrical outlet. Make sure the On/Off button is pressed. 

If the power cord is missing or if anything seems out of place in the box then reach out to AT&T on their official customer number. Wait for the Power and PON lights to turn solid Green. Follow steps 2 & 3 to complete your AT&T Fiber self Installation. 

Step 2

Connect your AT&T WiFi Gateway, Your AT&T package equipment package comes included with color-coded wiring, which matches up with the color-coded section on your Gateway. 

  • Connect the Red ONT Ethernet cable from your service box onto your Gateway.
  • Plug the gateway’s Black power cord into the device and then to an electrical outlet. 

If you wish to use a wired internet connection then follow the same procedure as the DSL internet service. If you have a digital phone service then plug in the Gray Cable from the Gateway’s phone lines 1 & 2 into your phone. 

Step 3

Set up your AT&T WiFi connection. Open the WiFi settings on your phone or computer, select your WiFi name, and type in the 12 character password. Both of which will be printed on the bottom of your WiFi Gateway. 

The next thing you have to do is to open your browser and follow the online registration instructions. When you open your browser you will be automatically redirected to the AT&T self-installation registration page. Follow the directions on the page and you will be able to register for your AT&T Internet service. Complete the next step and complete the AT&T Fiber internet self-installation.

Step 4

Customize your settings with the smart home manager application. To complete the AT&T internet self-installation, visit att.com/smarthomemanager to customize your WiFi network and name and password. Then you can start connecting other devices to your network using the customization settings. 

Troubleshooting: Self Install AT&T Internet

Self Installing AT&T internet can be troublesome at times but almost all your problems will be solved with this troubleshooting guide. Read the &#;AT&T Self Install Troubleshoot&#; guide till the end. 

1. If the Gateway Broadband Light Doesn’t Turn Green

There are basically 3 things that you can do if your Broadband light doesn’t turn green. Do this: 

  • Check your service activation date, you can only do the AT&T Internet self-installation yourself after 2 P.M. Your service activation date is noted on your packing slip.
  • Check your connections and power. Connect all the cables and the cord securely, if the power light is on and your gateway isn’t green, then try another outlet.
  • Try unplugging and replugging. Unplug the AT&T WiFi gateway’s power cord for 15 seconds and then plug it back in again. Wait for 2 minutes for the device to complete the reboot. 

2. If Your Gateway Power Light Is Amber

There’s only one solution to try if your AT&T WiFi Gateway’s power light turns amber. While it isn’t exactly a problem, most people don’t understand it. Give your equipment some time. The light turns amber during the power-up process. Make sure not to unplug anything at the time. 


Show Some Love

AT&T Internet Self Installationat&t self install internetatt fiber self installatt self installself install att wifiself installation at&t internet

Sours: https://www.thereviewsnow.com/att-internet-self-installation/
  1. Roll line ice wheels
  2. Crochet t shirt neckline
  3. Tervis water bottle lid replacement
  4. Toyota dyna for sale usa

At Allconnect, we work to present quality information with editorial integrity. While this post may contain offers from our partners, our opinions are our own. Here’s how we make money.

AT&T offers customers two installation options ― standard professional installation and self-installation. Standard professional installation is included with AT&T plans at no extra cost. However, if you’re a do-it-yourselfer or want to avoid the hassle of scheduling an installation appointment, you can set up your own service.

If instruction manuals make you cringe, we’re here to help! Keep reading to learn how to set up your AT&T Internet and AT&T Fiber internet from start to finish.

AT&T internet self-installation guide

Note: If you have a traditional (non-digital) home phone system, you’ll need to connect your phone to a dual-port filter (included in your equipment package). Plug the dual-port filter into your phone jack, then plug your phone into one of the filter’s ports. The other port will be used to connect with your Gateway.

Step 1: Connect your Gateway. Your AT&T equipment package comes with color-coded wiring, which matches up with color-coded ports on your Gateway.

  • Plug the green data cable into the green Broadband (DSL) port and your wall jack (if you use traditional phone service, it will plug into your dual-port filter).
  • Plug the gray cable into the Gateway’s Phone Lines 1 & 2 ports and your phone (if you use traditional phone service, plug the cable into your phone and the Phone port on the dual-port filter).
  • Plug the black power cord into an electrical outlet and your Gateway.

If you intend to use a wired internet connection (rather than a wireless/Wi-Fi connection), plug the yellowEthernet cable into the Gateway’s yellow Ethernet port and your computer.

Give your Gateway about 10 minutes to power up. The Broadband and, if applicable, Service lights will turn solid green when it’s ready to go. If neither of these lights turns solid green after 10 minutes, view the Troubleshooting section.

Step 2: Set up your Wi-Fi network. On your device or computer, open your Wireless Network Settings. Select your Wi-Fi Network Name (SSID) and enter your character password (both are listed on the sticker on your Gateway). Next, open your browser and follow the online registration instructions. If registration doesn’t start automatically, go to att.com/Uverse. If you already registered online, you should be good to go.

Step 3: Customize your settings with the Smart Home Manager app. Open the Smart Home Manager app on your device or visit att.com/smarthomemanager to customize your Wi-Fi network name and password. You can then start connecting other devices to your network using your personalized settings.

AT&T Fiber℠ self-installation guide

Step 1: Connect the AT&T Fiber℠ Service Box. Your service box (Optical Network Terminal or ONT) is the device that connects your home to the AT&T Internet system. It may be mounted on a wall in the basement, garage or utility closet. Remove the cover and connect the following:

  • Plug the green fiber connecter to the green PON port (if not already connected). CAUTION: Do not look into the end of the fiber connector as this can cause eye damage.
  • Plug the red ONT Ethernet cable into the service box Ethernet port.
  • Plug the black power cord into the service box and an electrical outlet. Make sure the ON/OFF button is pressed in.

If the power cord is missing or anything appears damaged, call AT&T at

Next, wait for the Power and PON lights to turn solid green, then follow steps 2 and 3 from the section above. If the Power and PON lights are off or do not turn solid green, view the Troubleshooting section below.

Step 2: Connect your Gateway. Your AT&T equipment package comes with color-coded wiring, which matches up with color-coded ports on your Gateway.

  • Connect the red ONT Ethernet cable from your service box to the ONT port on your Gateway.
  • Plug the Gateway’s black power cord into the device and an electrical outlet.

If you intend to use a wired internet connection (rather than a wireless/Wi-Fi connection), plug the yellow Ethernet cable into the Gateway’s yellow Ethernet port and your computer. If you have digital phone service, plug the gray cable from the Gateway’s Phone Lines 1 & 2 port to your phone.

Give your Gateway about 10 minutes to power up. The Broadband and, if applicable, Service lights will turn solid green when it’s ready to go. If neither of these lights turns solid green after 10 minutes, view the Troubleshooting section.

Step 3: Set up your Wi-Fi network. On your device or computer, open your Wireless Network Settings. Select your Wi-Fi Network Name (SSID) and enter your character password (both are listed on the sticker on your Gateway). Next, open your browser and follow the online registration instructions. If registration doesn’t start automatically, go to att.com/Uverse. If you already registered online, you should be good to go.

Step 4: Customize your settings with the Smart Home Manager app. Open the Smart Home Manager app on your device or visit att.com/smarthomemanager to customize your Wi-Fi network name and password. You can then start connecting other devices to your network using your personalized settings.

Troubleshooting

If your Gateway Broadband light doesn’t turn solid green during power-up:

  • Check your service activation date. You can only install service after 2 p.m. on your service activation date, which is noted on your packing slip.
  • Check your connections and power. Make sure all the cables and cords are connected securely. If the Power light on your Gateway isn’t green, try another outlet.
  • Unplug and replug. Unplug the Gateway power cord for 15 seconds, then plug it back in. Give the device up to two minutes to reboot.

If your Gateway Service light (if applicable) doesn’t turn solid green during power-up:

  • Unplug and replug. Unplug the Gateway power cord for 15 seconds, then plug it back in. Allow at least two minutes to reboot. If the light is still red, contact AT&T technical support.

If your Gateway Power light is amber:

  • Give it a moment. The light turns amber during the device’s power-up process. Do not unplug any cables during this time.

If you have any other questions or concerns, contact AT&T technical support () or visit the AT&T Support Center.

AT&T self install frequently asked questions

My equipment package is missing a piece. What should I do?

Contact AT&T technical support to have a replacement sent to you.

How do I change my Wi-Fi network name?

You can change your network’s name and password through the Smart Home Manager app, or at att.com/smarthomemanager.

How do I install an AT&T Smart Wi-Fi Extender?

  • First, plug your power cord into the Wi-Fi Extender, then plug it into an electrical outlet near your Gateway. Push the power button and wait about three minutes for the Wi-Fi Extender’s light to blink green.
  • Next, press the WPS button on your Gateway and the WPS button on your Wi-Fi Extender. The flashing light will turn solid green when the devices are paired, which usually takes about three minutes.
  • Finally, unplug your Wi-Fi Extender from the outlet, move it to its new location, and plug it into a nearby electrical outlet. The light will turn green when the connection with the Gateway is reestablished, which usually takes a few minutes. For best results, keep your Wi-Fi Extender within 40 ft. of your Gateway, and no more than two walls or one floor away. Be sure to keep it in an open spot where other objects can’t block its signal.

For more guides, news and other internet information, visit our Resource Center.

Sours: https://www.allconnect.com/blog/att-self-installation-guide
How to Use Your Own Router with AT\u0026T Fiber Internet - 2020 Update with BGW210-700

Made me feel disgusted. He sat down opposite and they began to chat in Spanish, which I did not understand a word. Throughout the conversation, this guest insolently stared at my tits and legs, with the signora, none of the guests allowed themselves this, knowing about his attitude. Towards me, but this does not matter.

Self install fiber att

Natasha groaned. He grabbed her by the waist and started hammering, picking up the pace. Natasha zealously waved, wanting to plant even deeper on his weapon.

How To Setup AT\u0026T Fiber Internet

What's this. - It was lying here, it smelled strongly, and I threw it into the underground - Vasya answered. Mikhail threw a rag, got out of the underground and, covering the manhole with a lid, gave the flashlight to Vasily. - What happened then.

Similar news:

Although no one was going to take out anyone, and Serge and Vova had to go ten minutes later, just in the midst of our fun with. Nastya. - And now take off your clothes. The girl obediently got up, and sobbing began to pull off her clothes.



5502 5503 5504 5505 5506