Recovery mode mac not working

Recovery mode mac not working DEFAULT

[Fixed] Mac Won't Boot into Recovery Mode

"My Mac recovery mode is not working, and I have searched the internet for some valid solutions. Can someone help me to get to the recovery mode safely? Thanks in advance!"

Just like any other device, the MacBook is also vulnerable to working issues. Usually, when a fault or error arises on the MacBook, the users opt for Recovery Mode to fix the issue. But the worst situation is when the macOS recovery mode gets stuck.

Luckily, you don't even have to worry about this problem as we can help you resolve it and even recover lost partition files.

Now, let's discuss how to fix "Mac can't boot into Recovery Mode" and also get some extra helpful information, for example, what's Recovery Mode. Even you can also learn the best solution to recover lost partition files.

What Is Recovery Mode?

As we are trying to fix the Mac stuck in recovery mode, you must know about this mode as much as possible. Mac Recovery Mode is like a program that loads the Mac built-in recovery tool from a specific disk partition that holds the duplicate OS X installer with a recovery image.

Just think about a situation when your Mac couldn't be recovered using any other method. Then the last option left would be using the Recovery mode to diagnose disk problems. It is a multifunctional Mac utility that enables the users to recover and restore data from Time Machine safely. The users can also fix and wipe the data on the hard disk and even re-install macOS.

You can use the Mac Recovery Mode to:

  • Scan, verify, erase, and repair the connected drives with Disk Utility.
  • Restore Mac from Time Machine Backup
  • Erase, Install, or re-install factory version of OS X
  • Check the Internet connection or get help online.
  • Reinstall the macOS system

After this, you'll need to know how to enter and exit the recovery mode.

How to Enter Recovery Mode?

  1. Start with clicking on the Apple menu and choose the Restart option or Power on your Mac.
  2. When the Mac restarts, hold the Command + R keys together until the Apple logo appears. Within a few minutes, the macOS utility window will appear on the screen.

press-keys

This is how to enter recovery mode. In case the login window doesn't appear on the screen, you might have to restart your Mac and try again.

How to Exit Recovery Mode?

It often happens that you enter the Recovery mode but don't know how to exit recovery mode. But it is straightforward.

  • You only have to choose the "Restart" option from the Apple menu to exit the mode.
  • You can also use the Startup Disk option from the menu if Mac keeps returning to the recovery mode. Your Mac will be good to go by selecting the normal boot disk and clicking on the Restart button.

Four Ways to Fix "Mac Won't Boot into Recovery Mode."

In some instances, Mac users try to resolve some common disk errors or some other issue with Mac, and they find out that the Mac recovery mode is stuck. If the Mac won't boot into recovery mode, it means you have to use the Internet connection and Apple server to look for a possible solution.

Here are four common macOS recovery methods that can resolve almost any issue on your Mac to ease up your tension and worries.

Way 1. Use Time Machine Backup:

Mac users make a smart move as they keep their Backup external drive connected to Time Machine. If any file is lost or corrupted, the users can restore the files using the Backup. It often comes in handy when you can't boot into recovery on Mac.

  1. Restart Mac and click on the Options tab during start-up. Connect your Time Machine, and it will boot in a while.
  2. Choose the Recovery Drive to boot Mac and click on Use Disk to update the system storage.

time-machine-backup

Way 2. Create a bootable installer:

You can also use if the Mac recovery mode is not working to create a bootable installer using the Disk Utility feature. It is advised that you use a dedicated USB for this process. The steps you have to follow are given below:

  1. Get to the Utility window by restarting your Mac and accessing the Options tab during start-up.
  2. Choose the Disk Utility mode and connect a bootable installer drive with the Mac.
  3. You have to select the drive from the pop-up list, and Mac will restart. Now you can repair Mac easily so that it can be used like before.

Related: Disk Utility is an inbuilt tool on Mac. You can also use it to resize a volume on your device.

- 2 minutes to read it.

create a bootable installer

Way 3. Use Mac Internet Recovery:

If you have no idea what to do to resolve the macOS recovery, not working issues, you can rely on the Internet recovery feature! As you get your Mac online, it will automatically look for a viable solution to repair Mac.

  1. Directly access the internet recovery mode by long-pressing the Option + Command + R during the restart. A globe icon will appear on the screen with a status bar.
  2. Connect to a network and follow the steps guided by the utility. When you finish the process, Mac repair will be done, and you will access it.

os x internet recovery mode mac

Way 4. Reinstall Mac OS X:

If none of the methods work out to repair the Mac OS X, then the last option left will be re-installing. It is the final logical solution. It will be better if you already have a backup of the data files stored on Mac; otherwise, they will get lost.

Choose the "Reinstall Mac OS X" option from the Utility window and wait while the new copy of Lion is set up and installed on your device.

reinstall mac


Part 3. How to Start Mac in Recovery Mode?

When the Mac system or volume is damaged, it is better to use the Internet recovery mode instead of standard recovery. Internet recovery starts up Mac from Apple's servers directly. It can run a quick test of the memory and hard drive to look for issues.

Mac will enter the internet recovery mode if the boot sector is missing or the recovery partition is damaged or corrupted. To start Mac in recovery mode, here are the steps that you need to follow:

  1. Restart or power on Mac and hold the Command + Option + R keys after hearing the start-up chime. Release the keys when you see the animated globe on the screen.
  2. Depending on your Internet connection, it might take a while, so keep your Mac connected to a power source.
  3. Once the connection is established, you will see the macOS utility window on the screen. You only have to click on the option to select one of them.

The recovery tools allow the users to re-install the version of macOS or restore the computer. Apart from this, you can run Disk Utility to fix errors and look online for solutions too. You can explore more from Wondershare Video Community.

Video Tutorial on How to Boot Mac into Recovery Mode


Part 4. How to Recover Lost Files

If you don't have a backup copy of your data files and lost them because of the recovery mode, you will need Recoverit Data Recovery Mac.

It is a complete data recovery tool that can restore a lost file from Mac's recovery mode, along with other data loss scenarios. This tool is skilled in getting the important files back on your device from any storage space.

Download | MacDownload | Win

You can download the software from their official website. The software is available for Mac and Windows both. So, you can easily download it on your Mac OS X. After it is installed, follow the steps given below to recover the lost files:

Step 1: Select a partition.

Launch the software and select the drive from where the data files are lost. If you don't know which drive to search, tap on the "I can't find my partition" option and hit the Start button.

select a partition after booting Mac

Step 2: Scan the partition.

Typically, the software will run an all-around scan and search for the lost and deleted files on the entire drive.

scan for lost mac files

Step 3: Preview and recover partition

When the scan completes, the files will be listed on the screen. The software will sort out the files according to format to make the search easier. You can select multiple files at a time and have a preview of them.

recover lost partition

Finally, tap on the Recover option, and the files will be restored on your drive. During recovery, make sure that you don't save the files in the same location because it may lead to data loss again.

Hopefully, you have gathered more than enough information if your Mac won't boot into recovery mode. You can repair your device by using the Mac Utility. But if the Utility can't help you out, then you can rely on Recoverit Data Recovery. This way, you will be able to recover lost data from your Mac.

Download | MacDownload | Win

Other popular Articles From Wondershare

Sours: https://recoverit.wondershare.com/mac-tips/cannot-boot-into-recovery-mode-mac.html

Mac Won't Boot into Recovery Mode Fixes | Mac Command R Not Working Solutions

Mac Recovery Mode is designed for users to self-troubleshooting various problems. Pressing Command + R, you can boot into Recovery Mode to repair the startup disk, reinstall macOS, or prevent the Mac from starting up normally. But sometimes things would go wrong. Users might have trouble booting their Mac into Recovery Mode. If you have encountered the same problem, then you will need this article. But before checking the solutions, it's better for you to understand the possible reasons why Mac Command R is not working.

Possible Reasons of Mac Won't Boot into Recovery Mode

Your Mac failed to boot into Recovery Mode usually happens without notice. Below are some of the most possible reasons.

  1. 1. Your Mac is the M1 Mac. M1 Mac is introduced in November There is a new way for users to enter Recovery Mode on M1 Mac.
  2. 2. Your Mac is too old. For computers running Mac OS X Snow Leopard or older, they don't have a recovery partition. And that's why you can't press Command + R to boot into Recovery Mode.
  3. 3. Keyboard connection failure. If you are using a Bluetooth keyboard, it's possible that the keyboard is not connected to your Mac.
  4. 4. Your Recovery partition is damaged or deleted.

After understanding the possible reasons why you can't boot into recovery mode on your Mac, now you can follow the given methods to solve the problem.

Method 1. Boot into Recovery Mode for M1 Mac

Here are the detailed steps of how to entering Recovery on an M1 Mac.

Step 1. Turn off your Mac first, and long-press the on button.

Step 2. When the Apple logo appears you'll see text informing you that, if you continue holding the power button, you will access startup options.

Step 3. Select Options > Continue, and this will open Mac Recovery.

M1 Mac boot into Recovery Mode

Method 2. Check Mac Keyboard Connections

This method is to help you to confirm that the problem is not caused by keyboard failure. You can disconnect your current keyboard, and connect another one that can normally work with another Mac to see if you can boot your Mac into Recovery Mode.

If you can, then your keyboard may be broken. You can change to a new one. If you can't, then you can try other methods.

Method 3. Create Bootable Installer

To create a bootable installer, you need a USB flash drive with at least 14GB in size, and a downloaded installer for macOS Big Sur, Catalina, Mojave, High Sierra, or El Capitan. You can download the installer on Apple's official website. The simplest way is to create through Mac Terminal. Here are the detailed steps:

Step 1. Connect the prepared USB flash drive to your Mac.

Step 2. Open Terminal, paste one of the following commands in it.

Big Sur:
sudo /Applications/Install\ macOS\ Big\ Sur.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume

Catalina:
sudo /Applications/Install\ macOS\ Catalina.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume

Mojave:
sudo /Applications/Install\ macOS\ Mojave.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume

High Sierra:
sudo /Applications/Install\ macOS\ High\ Sierra.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume

El Capitan:
sudo /Applications/Install\ OS\ X\ El\ Capitan.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume --applicationpath /Applications/Install\ OS\ X\ El\ Capitan.app

Step 3. Press Return to enter the command.

Step 4. Enter your administrator password and press Return again.

Step 5. When prompted, type Y to confirm that you want to erase the volume.

Step 6. After the volume is erased, you will receive a notice saying that Terminal would like to access files on a removable volume. Click OK to allow the copy to proceed. 

Step 7. When Terminal informs you that it's done, the volume will have the same name as the installer you downloaded, such as Install macOS Big Sur. You can now quit Terminal.

Method 4. Boot Mac in Safe Mode

Safe Mode can help you determine if the problem is caused by software loaded when your Mac starts up. Here's how to start up your Mac in safe mode.

Step 1. On your Mac, choose the Apple menu > Shut Down. After your Mac shuts down, wait 10 seconds.

Step 2. Restart your Mac, then immediately press and hold the Shift key.

Step 3. Release the Shift key when you see the login window.

Step 4. Log in to your Mac, now you're in the safe mode.

Boot Mac in Safe Mode

Method 5. Restore Mac with Time Machine Backup

If you have backed up your Mac with Time Machine before, you can use the Time Machine backup files to restore your Mac. Here’s how you can do it.

Step 1. Shut down your Mac first and then connect the Time Machine backup drive to your Mac.

Step 2. Press the power button and immediately press and hold the Option key.

Step 3. When you see the startup manager screen, you can release the Option key.

Step 4. Select the backup drive and click Return.

Step 5. Your Mac will boot into an OS X installer type screen. Here you can choose to restore from one of the backups.

related articles

Solved: USB Flash Drive Not Showing Up on Mac

Is the USB flash drive not showing up on Mac after inserting it in the USB port? Find solutions here. Download EaseUS Data Recovery Wizard for Mac when you want to recover data from a USB drive not recognized.

USB flash drive not showing up on Mac

Method 6. Reinstall OS with Mac Internet Recovery

The last method you can try is to boot into Internet Recovery to reinstall macOS from Apple's server. 

Step 1. Shut down your Mac first. 

Step 2. Press the power button and immediately press and hold the Option + Command + R key.

Step 3. Wait until you see a spinning icon with a progress bar appear on the screen.

Note: Your Mac should be connected to a strong internet connection.

Reinstall OS with Mac Internet Recovery

Bonus Tip: How to Recover Data from Mac

Although Mac computers are advanced enough, accidents can happen. An OS crash or an accident may lead to permanent data loss, especially when you don't have a Time Machine backup, you will have no way to find back your lost data.

EaseUS, as a pioneer in the field of data recovery, has developed exclusive and safe data recovery software - EaseUS Data Recovery Wizard for Mac to help users recover their data. With this tool, users can quickly restore deleted or lost data on Mac in seconds, and no technical experience required.

Here is a detailed guide on how to use EaseUS Data Recovery Wizard for Mac to recover data. You can download this tool first and follow the guide to have a try.

Download for Mac Also Available for Windows

Step 1. Select the disk location (it can be an internal HDD/SSD or a removable storage device) where you lost data and files. Click the "Scan" button.

select a location and click scan

Step 2. EaseUS Data Recovery Wizard for Mac will immediately scan your selected disk volume and display the scanning results on the left pane.

start scan on the Mac

Step 3. In the scan results, select the file(s) and click the "Recover" button to have them back.

click recover now button to recover lost data on your Mac

The Bottom Line

The reason why your Mac won't boot into Recovery Mode can be divided into two aspects. One is hardware malfunction, that is your keyboard may be broken. Another is there's something wrong with your Mac's recovery partition.

In this article, we have listed comprehensive solutions. No matter why your Mac won't boot into Recovery Mode, you can try to solve it with the provided solutions. What's more, a data recovery tool is also included on this page. You can have a free trial if you are interested in it.

Sours: https://www.easeus.com/mac-file-recovery/mac-wont-boot-into-recovery-mode.html
  1. Tires for 2004 chrysler sebring
  2. Figure me out maths worksheet
  3. Chicken bacon ranch pull apart

Use macOS Recovery on an Intel-based Mac

macOS Recovery is the built-in recovery system on your Mac.

You can use the apps in macOS Recovery on an Intel-based Mac to repair your internal disk, reinstall macOS, restore your files from a Time Machine backup, set security options, and more.

Reinstalling macOS requires an internet connection. To connect to the internet, you can use a wireless or wired network connection. If you’re trying to connect to Wi-Fi through a captive portal (for example, at a coffee shop, library, or hotel) or an enterprise network, you might not be able to access the internet in macOS Recovery. See Connect to the internet using Wi-Fi.

Note: If you want to get your Mac ready to trade in, sell, or give away, and your computer is a Mac with Apple silicon or an Intel-based Mac with an Apple T2 Security Chip, use Erase Assistant in macOS. To use Erase Assistant, start up your computer in macOS, choose Apple menu > System Preferences, choose System Preferences > Erase All Content and Settings, then follow the onscreen instructions.

Apps available in macOS Recovery on an Intel-based Mac

The following apps are available in macOS Recovery on an Intel-based Mac:

  • Recovery: The Recovery app opens when your computer starts up in macOS Recovery. See Start up your Intel-based Mac in macOS Recovery and Quit macOS Recovery.

  • Time Machine System Restore: Restore your data from a Time Machine backup. In the Recovery app, select Restore From Time Machine, then click Continue. To return to the Recovery app, choose Time Machine System Restore > Quit Time Machine System Restore. See Use Time Machine to restore your system.

  • Install macOS: Reinstall macOS on your computer. In the Recovery app, select Reinstall macOS Monterey, then click Continue. To return to the Recovery app, choose Install macOS Monterey > Quit Install macOS. See Reinstall macOS.

  • Safari: In the Recovery app, select Safari, then click Continue. To return to the Recovery app, choose Safari > Quit Safari. If you’re connected to the internet, you can use Safari to search for more information on the Apple Support website. Note that Safari browser plug-ins and extensions are disabled in macOS Recovery.

  • Disk Utility: Repair or erase your disk. In the Recovery app, select Disk Utility, then click Continue. To return to the Recovery app, choose Disk Utility > Quit Disk Utility. See Erase and reinstall macOS.

  • Startup Security Utility: Set the security policies for your Mac. In the Recovery app, choose Utilities > Startup Security Utility. To return to the Recovery app, choose Startup Security Utility > Quit Startup Security Utility. See Use Startup Security Utility to set a firmware password and Use Startup Security Utility to set secure boot options.

    The options available in Startup Security Utility vary depending on your Mac model. See the Apple Support articles About Startup Security Utility and Mac models with the Apple T2 Security Chip.

  • Startup Disk: Set the startup disk for your Mac. Choose Apple menu > Startup Disk. To return to the Recovery app, choose Startup Disk > Quit Startup Disk.

  • Terminal: In the Recovery app, choose Utilities > Terminal. To return to the Recovery app, choose Terminal > Quit Terminal.

You can also use macOS Recovery to do the following:

Start up your Intel-based Mac in macOS Recovery

  1. Restart your Mac.

  2. Immediately press and hold one of the following key combinations until you see the startup screen:

    • Command-R: Start up from the built-in macOS Recovery System. Use this key combination to reinstall the latest macOS that was installed on your system, or to use the other apps in macOS Recovery.

    • Option-Command-R: Start up from macOS Recovery over the internet. Use this key combination to reinstall macOS and upgrade to the latest version of macOS that’s compatible with your Mac.

    • Option-Shift-Command-R: Start up from macOS Recovery over the internet. Use this key combination to reinstall the version of macOS that came with your Mac or the closest version that’s still available.

  3. If you see a lock, enter the password for your Mac.

  4. If you have multiple volumes on your disk, select the volume you want to recover, then click Next.

  5. If requested, choose an administrator account, click Next, enter the password for the account, then click Continue.

    When the Recovery app appears in the menu bar, you can choose any of the available options in the window or the menu bar.

Connect to the internet using Wi-Fi

If the Wi-Fi menu icon (in the upper-right corner of the screen) contains one or more bars , Wi-Fi is turned on and connected to a wireless network. If the Wi-Fi menu icon doesn’t contain any bars , Wi-Fi is turned on but isn’t connected to a wireless network. If the Wi-Fi menu icon has a slash through it , Wi-Fi is turned off. Wi-Fi needs to be turned on before you can join a wireless network.

On your Mac, do any of the following:

  • Turn on Wi-Fi: Click the Wi-Fi menu icon, then choose Turn Wi-Fi On.

  • Turn off Wi-Fi: Click the Wi-Fi menu icon, then choose Turn Wi-Fi Off.

  • Join a network: Click the Wi-Fi menu icon, then choose a network. If requested, type the network’s password.

  • Join a closed network: Click the Wi-Fi menu icon, then choose Join Other Network. Enter the network’s name and, if requested, the network’s password.

Repair your internal storage device

If you have issues with your computer or if you started your computer and the macOS Recovery window appeared, you may need to repair your computer’s internal storage device (such as a solid-state drive (SSD)).

  1. In the Recovery app, select Disk Utility, then click Continue.

  2. In the Disk Utility app, choose View > Show All Devices.

  3. In the sidebar, select a volume, then click the First Aid button .

  4. In the First Aid dialog, click Run, then follow the onscreen instructions.

  5. When the First Aid process is complete, click Done.

  6. Repeat steps 3 through 5 for each volume on the storage device.

  7. In the sidebar, select a container, then click the First Aid button .

  8. In the First Aid dialog, click Run, then follow the onscreen instructions.

  9. When the First Aid process is complete, click Done.

  10. Repeat steps 7 through 9 for each container on the storage device.

  11. In the sidebar, select the storage device, then click the First Aid button .

  12. In the First Aid dialog, click Run, then follow the onscreen instructions.

  13. When the First Aid process is complete, click Done.

If Disk Utility can’t repair your disk, back up as much of your information as possible, then follow the instructions in Erase and reinstall macOS.

To return to the Recovery app, choose Disk Utility > Quit Disk Utility.

Use Time Machine to restore your system

If you previously created a Time Machine backup, you can restore everything on your computer to its previous condition.

Important: Only use your Time Machine backup to restore information to the computer that is the source of the backup. If you want to transfer information from this Mac to a new computer, quit macOS Recovery, restart your Mac, then use the Migration Assistant app in macOS.

  1. If your backup is on a Time Capsule, make sure you’re connected to the internet.

  2. In the Recovery app, select Restore From Time Machine, then click Continue.

  3. In the Time Machine System Restore app, follow the onscreen instructions.

Use Startup Security Utility to set a firmware password

Setting a firmware password prevents your Mac from starting up from any internal or external storage device other than the startup disk you’ve selected unless the firmware password is entered. You can turn on, turn off, or change the firmware password using Startup Security Utility.

When the firmware password is turned on, each time you start up from macOS Recovery or from a storage device other than the one selected in Startup Disk preferences, you need to enter the firmware password.

After you restart your Mac, changes to the firmware password take effect.

  1. In the Recovery app, choose Utilities > Startup Security Utility.

  2. If requested, enter an administrator user name and password.

  3. Do any of the following:

    • Turn on the firmware password: Click Turn On Firmware Password, enter a new password, reenter it to verify the password, then click Set Password.

    • Turn off the firmware password: Click Turn Off Firmware Password, enter the password, then click Turn Off Password.

    • Change the firmware password: Click Change Password, enter the old password, enter a new password and verify it, then click Change Password.

  4. Click Quit Startup Security Utility.

Use Startup Security Utility to set secure boot options

Secure boot options are available only on Mac computers with the Apple T2 Security Chip.

After you restart your Mac, changes to the secure boot option take effect.

  1. In the Recovery app, choose Utilities > Startup Security Utility.

  2. Enter an administrator user name and password.

  3. In the Secure Boot pane, choose one of the following security options:

    • Full Security: Ensures that only your current OS, or signed operating system software currently trusted by Apple, can run. This mode requires a network connection at software installation time.

    • Medium Security: Allows any version of signed operating system software ever trusted by Apple to run.

    • No Security: Does not enforce any requirements on the bootable operating system.

  4. In the Allowed Boot Media pane, choose one of the following boot options:

    • Disallow booting from external or removable media: Restricts the ability to boot from any device not protected by the Apple T2 Security Chip, such as USB and Thunderbolt drives or internally connected PCIe or SATA drives.

    • Allow booting from external or removable media: Does not restrict the ability to boot from any devices.

  5. Choose Startup Security Utility > Quit Startup Security Utility.

Reinstall macOS

Under some circumstances, you may need to reinstall macOS. You can reinstall macOS while keeping your files and user settings intact.

  1. Make sure you’re connected to the internet.

  2. In the Recovery app, click Reinstall macOS Monterey, then click Continue.

    Important: In the pane where you select a disk, select your current macOS disk (in most cases, it’s the only one available).

  3. Follow the onscreen instructions.

Erase and reinstall macOS

If you erase and reinstall macOS, your user accounts, network settings, and all of the files and folders on your Mac are deleted. Before you erase macOS, attempt to log back in to your system, then back up any files you want to keep by copying them to another storage device. Also, write down your network settings from Network preferences to make it easier to get connected again after reinstalling macOS.

  1. Make sure you’re connected to the internet.

  2. In the Recovery app, click Disk Utility, then click Continue.

  3. In Disk Utility, select the volume you want to erase in the sidebar, then click the Erase button in the toolbar.

  4. Type a name for the volume in the Name field.

  5. Click the Format pop-up menu, choose APFS, then click Erase Volume Group.

  6. When the erase process is complete, click Done, then choose Disk Utility > Quit Disk Utility.

  7. In the Recovery app, click Reinstall macOS Monterey, click Continue, then follow the onscreen instructions.

View the recovery log

The recovery log contains messages logged by macOS Recovery. You can specify the types of messages to view, filter messages to search for specific text, and save the recovery log to a file.

  1. In the Recovery app, choose Window > Recovery Log.

  2. Click the Detail Level pop-up menu, then choose which messages to display:

    • Show Errors Only: Choose this option to display only error messages.

    • Show Errors and Progress: Choose this option to display error messages and progress messages.

    • Show All Logs: Choose this option to display all messages.

  3. To filter messages, type the text you want to search for in the Filter field.

  4. To save the recovery log, click the Save button, choose a location for the file, then click Save.

  5. When you’re finished viewing the recovery log, click the Close button in the top-left corner of the window.

Create a recovery diagnostics file

If you file a problem report using Feedback Assistant, you may be asked to provide a recovery diagnostics file. You can create the file and save it to an external storage device.

  1. Connect an external storage device to your Mac.

  2. Press Control-Option-Shift-Command-Period.

  3. After the screen flashes, wait a few moments until a dialog appears.

  4. Use the dialog to save the recovery diagnostics file to a location on your external storage device.

Quit macOS Recovery

Your Mac restarts automatically while restoring your system from Time Machine or reinstalling macOS. In other cases, you need to quit macOS Recovery manually (for example, if you want to back up your files before reinstalling macOS, or if you just changed a setting using Startup Security Utility).

On your Mac, do one of the following:

  • Restart your Mac: Choose Apple menu > Restart.

  • Choose a different startup disk before restarting your Mac: Choose Apple menu > Startup Disk, select a startup disk, then click Restart.

  • Shut down your Mac: Choose Apple menu > Shut Down.

See alsoUse macOS Recovery on a Mac with Apple siliconErase your Mac

Sours: https://support.apple.com/guide/mac-help/use-macos-recovery-on-an-intel-based-mac-mchlcf9a8/mac
How to Put your Mac into Recovery Mode (4K)

Fixed! Mac Won’t Boot into Recovery Mode | Command R Not Working [MiniTool Tips]

Languages: Deutsch

Summary :

Mac won’t boot into Recovery Mode

When your Mac is unbootable, you can use the Command-R combination to boot into Recovery Mode and use the options in it to solve the issue. However, sometimes you find that Mac won’t boot into Recovery Mode. If you don’t know why and how to solve the issue, you can read this MiniTool post to get the answers.

What Is Mac Recovery Mode?

On July 1, , Apple released Mac OS X Lion to the public. In this mac OS version, Apple has introduced a recovery partition that contains the utilities generally found on the OS X discs.

Mac Recovery Mode relies on the Recovery partition on Mac. The Recovery partition is a magical existence. Even you wipe or start your Mac computer again from scratch, the Recovery partition can still be there for you to solve some serious issues like macOS could not be installed on your computer, MacBook boot into a black screen, Mac won’t boot past the Apple logo, and so on.

You can boot your Mac into Recovery Mode and then solve the issue by restoring from an available Time Machine backup, reinstalling macOS, fixing the startup disk via Disk Utility, or get help from Apple’s support.

Mac Recovery Mode

To be specific, there are four universal options in Mac Recovery Mode:

  • Restore From Time Machine Backup: if you have backed up your Mac computer using Time Machine to an external hard drive, you can use this option to restore your Mac from the backup. You need to connect the backup drive to your Mac in advance.
  • Reinstall macOS: this feature allows you to reinstall your macOS when the system encounters issues and can’t boot.
  • Get Help Online: when your Mac computer is unbootable, you can click it to open Apple’s support page using Safari and look for the solutions to your issue. However, in this mode, some browser features are not available.
  • Disk Utility: if there is something wrong with the startup disk on your Mac, you can use this option to access Disk Utility and then use it to repair the startup disk. Of course, you can also use this feature to fix other connected drives.

How to Boot into Mac Recovery Mode?

Before you make your Mac access Recovery Mode, you need to make sure that the machine is shut down completely. Then, you can follow these steps to boot into Recovery Mode:

  1. Press the Power button and immediately press Command-R.
  2. You release the keys when you see the Apple logo (the login screen).
  3. Type the password if prompt.
  4. You will see the macOS Utilities This means that you successfully access Mac Recovery Mode.

If Mac Won’t Boot into Recovery Mode

At times, you may find that command r not working when you strictly follow the above steps. That is, you can’t successfully access Mac Recovery Mode. Why does this issue happen?

Top Reasons for Mac Recovery Mode Not Working

  1. Your Mac is too old.
  2. Your Mac is running a macOS version that is older than Sierra (it was launched in ). If so, no all options in Recovery Mode are available.
  3. Your keyboard is broken.
  4. You are using a Bluetooth keyboard and it is not connected to your Mac via Bluetooth.
  5. The Recovery partition is damaged.
  6. The Recovery partition is missing.
  7. And more….

After knowing the causes, it’s time to take some measures to solve the problem. We have collected some solutions that are proved to be effective. Then, we will introduce them to you.

How to Fix Mac Won’t Boot into Recovery Mode/Command R Not Working?

  1. Use a bootable installer
  2. Use another keyboard
  3. Make sure your keyboard is properly connected to your Mac
  4. Reset SMC
  5. Use Safe Mode
  6. Use Time Machine backup
  7. Use Mac Internet Recovery to reinstall macOS

Solution 1: Use a Bootable Installer

As we have mentioned above, the Recovery partition appeared in If your Mac computer is too old, it doesn’t have the Recovery partition. It always happens to the Mac computer that is running Snow Leopard or older.

If you want to solve the issue, you need to reinstall the macOS using the original disc that is shipped with your Mac computer. If you lose the disc, you can create a bootable installer and then use it to reinstall macOS on your computer. After that, you can go to the Mac App Store and upgrade your computer to the latest macOS.

Solution 2: Use another Keyboard

If Command R is not working on your Mac, you need to check whether it is a keyboard problem. To rule out this possibility, you can disconnect the current keyboard from your Mac and then connect another keyboard that can normally work with your Mac. Next, you can try to boot your Mac into Recovery Mode to see whether the process is smooth.

If everything goes back to normal, it should be a keyboard problem. You need to replace the faulty keyboard with a new one.

Solution 3: Make sure Your Keyboard Is Properly Connected to Your Mac

If you are using a Bluetooth keyboard, you need to make sure that it is successfully connected to your Mac computer. If not, Command-R will not work of course.

This post is helpful: Set up your Apple wireless mouse, keyboard, and trackpad.

Solution 4: Reset SMC

The full name of SMC is the system management controller. If your Mac power, battery, or fans encounter issues, you can reset it to solve the problems.

If you are using a notebook:

  1. Shut down your Mac completely.
  2. Unplug the power cable and then re-plug.
  3. Press and hold Control-Shift-Option and press & hold the Power button for about 10 seconds.
  4. Release the keys and the button.
  5. Restart your Mac computer.

If you are using a Mac desktop:

  1. Unplug the power cable.
  2. About 15 seconds later, you can re-plug it.
  3. 5 seconds later, press the Power button to start your Mac.

However, if this method doesn’t work for you, you need to boot your Mac into Safe Mode to solve the issue.

Solution 5: Use Safe Mode

Safe Mode is another method to solve Mac won’t boot into Recovery Mode. Booting your Mac into Safe Mode can check issues on your Mac’s startup drive and automatically repair any issue it discovers.

If you are using an Intel-based Mac:

  1. Shut down your Mac.
  2. 10 seconds later, you need to press the Power button and immediately press & hold the Shift key.
  3. When you see the login screen, you can release the Shift key.

After these three steps, you can see the red Safe Mode at the top-right side of the screen.

If you are using a Mac with Apple silicon:

  1. Shut down your Mac.
  2. 10 seconds later, you need to press and hold the Power button until the startup disks and Options appears.
  3. Press and hold the Shift key.
  4. Click Continue in Safe Mode.

After using Safe Mode, you can shut down your Mac and then boot into Recovery Mode to see whether the process is successful. If not, you can try the next method.

Solution 6: Use Time Machine Backup

If there is an available Time Machine backup, you can restore your Mac from it even you can’t access Mac Recover Mode. You can follow these steps to do the job:

  1. Shut down your Mac.
  2. Connect the Time Machine backup drive to your Mac.
  3. Press the Power button and immediately press & hold the Option key.
  4. You can release the key when you see the startup manager screen.
  5. Select the backup drive and click Return.
  6. Your Mac will boot into an OS X installer type screen where you can restore from one of the backups.

Solution 7: Use Mac Internet Recovery to Reinstall macOS

If the Recovery partition is missing or damaged, Mac won’t boot into Recovery Mode/Command R not working can also happen. In a situation like this, you can use the Mac Internet Recovery to reinstall macOS to make everything goes back to normal.

  1. Shut down your Mac. If your Mac has no response, you can press and hold the Power button for a while to force shut down the computer.
  2. Press the Power button and immediately press & hold Command-Option-R or Command-Alt-R (on some Mac keyboards, there is an Alt key rather than an Option key).
  3. After a while, you can see a spinning globe with a message saying Starting Internet Recovery. Then, you can release these keys.
  4. Then, the message will be replaced with a progress bar. You should wait until the bar is filled and the macOS Utilities interface will appear.
  5. Click Reinstall macOS and follow the on-screen guide to perform a macOS reinstallation.

These are the methods to solve Mac Recovery Mode not working or Command R not working. We hope they can solve the issue you are facing. If you think these solutions are useful, you can click the following button to share them with others on Twitter.

How to Recover Data from a Mac That Can’t Boot?

If your Mac can’t boot, you’d better rescue your Mac files to a safe location and then fix the problem. How to recover data from an unbootable Mac? You can try Stellar Data Recovery for Mac, a professional Mac data recovery software.

This software has a boot edition. You can boot your computer from it and then recover your needed files to an external hard drive. Yes, you should prepare an external drive that has enough space to save the files you want to recover.

Besides, you also need to prepare a USB drive that has min 8 GB of space to create a recovery drive. The data in the USB drive will be erased during the creating process. You need to back up your USB if there are important files in it.

Step 1: Create a Recovery Drive

1. Connect the USB drive to your Mac.

2. Get a suitable edition from the MiniTool official site.

3. Download the software and install it on a Mac computer that can normally work.

4. Register the software with the license key you got.

5. Click the Click here link on the bottom-left corner of the screen to continue.

click here

6. Select the connected USB drive on the following interface and then click the Create Recovery Drive button.

select the target USB drive to create a recovery drive

7. Click OK on the small pop-out window when the creating process ends.

click OK

8. Remove the USB drive from the Mac computer.

Step 2: Recover Data from Your Mac

1. Connect the USB recovery drive to your Mac that won’t boot.

2. Connect an external hard drive to your Mac.

3. Press the Power button and immediately press & hold Option.

4. When you see the startup manager screen, you can release the key.

5. Your Mac shows you the drives it can detect including the USB recovery drive. You need to select the USB drive and press Return. After that, your Mac will boot from this USB recovery drive.

6. You will see the macOS Utilities Here, you need to choose StellarDataRecovery and click Continue.

7. You will enter the software’ interface. Then, you need to select the data types you want to recover. If you want to recover all types of files, you only need to turn on the button for Recovery Everything.

8. Click Next to continue.

select your needed data types and click Next

9. Select the drive you want to recover data from. Here, if you want to perform a deep scan, you need to turn on the button for Deep Scan (at the bottom-left corner).

Click the Scan button to start the scanning process.

click Scan

When the scanning ends, you can see the scan results. Then, you can open each folder to find your needed files and check them.

Click the Recover button and save them to the connected external hard drive.

save your needed files

Bottom Line

In this post, we show you how to fix Mac won’t boot into Recovery Mode using different methods in different situations. We hope these solutions are useful to you. At the same time, you also know how to recover data from an unbootable Mac computer.

If you have your good suggestions, you can share them with us in the comment. You can also contact us via [email&#;protected].

Mac Won’t Boot into Recovery Mode FAQ

How do I reboot my iMac?

  1. Click the Apple menu.
  2. Select Restart from the pop-up menu.

Your iMac will automatically restart.

How do I shut down a Mac that is not responding?

  1. Press and hold the Power button for about 7 seconds. This will force shut down your Mac.
  2. Press the Power button to restart your Mac to see whether it can normally boot.

ABOUT THE AUTHOR

Stella

StellaFollow us

Position: Columnist

Stella has been working in MiniTool Software as an English Editor for more than 4 years. Her articles mainly cover the fields of data recovery including storage media data recovery and phone data recovery, YouTube videos download, partition management, and video conversions.

Sours: https://www.minitool.com/data-recovery/fix-mac-wont-boot-into-recovery-mode.html

Mac not mode working recovery

Tips to Fix Mac Recovery Mode Not Working Issue

Whether you are trying to fix a stubborn problem, repair/erase a hard disk, or reinstall the latest macOS version, macOS recovery (launched in with OS X Lion) is the right way to go. While this official troubleshooter works well most of the time, it has had its fair share of issues. So, if Mac recovery mode is not working and you can&#;t figure out why the usual Command () + R process has gone south, you are at the right troubleshooting guide to cut the chase.

Mac Recovery Mode Not Working? Here&#;s Troubleshooting Guide

Possible Reasons Why Command + R Process May Not Be Working on Your Mac

First and foremost, it would be better to ensure you are using the right keyboard shortcut. While Command (⌘) + R key combination works on most Macs for entering macOS Recovery, it&#;s not the only option. That aside, there are many other reasons why macOS recovery won&#;t work. So, getting a close look at the possible snags first up would be apt.

Have Mac With T2 Chip? Try A Different Keyboard Shortcut

Command (⌘) + R shortcut may not work on your Mac with a T2 Security Chip. If it&#;s the case, try Option/Alt + Command (⌘) + R to enter the macOS recovery mode.

For the uninitiated, T2 Chip is the second generation custom silicon for Mac. It endows an advanced level of security by leveraging enclave coprocessor.

Following Macs Comes With Apple T2 Security Chip:

  • iMac Pro
  • Mac Pro
  • Mac mini
  • MacBook Air or later MacBook Pro or later

Side Note: There is also an option to check whether your Mac has a T2 chip or not. Click on the Apple () menu at the top left corner of the screen. Now, press and hold the Option key and select System Information. Next select Controller or iBridge in the sidebar. Now, you should see the Apple T2 chip on the right if your Mac supports it.

Ensure That The Keyboard is Not Faulty

Another thing worth keeping in mind is ensuring that the keyboard is not faulty. Yeah, if the keyboard is not working properly, the Mac may have a problem connecting to it via Bluetooth. In this case, try another keyboard. I would recommend you to choose the one that can plug in your Mac directly.

If you need a new Mac keyboard, check out this extensive roundup.

Did You Accidentally Delete Recovery Partition?

Maybe you had accidentally deleted Recovery partition while installing Windows via Boot Camp or replacing the hard drive on your Mac. Also, ensure that the Recovery partition is not corrupted.

Restart your Mac again and immediately press Command (⌘) and R to enter macOS Recovery.

If Command (⌘) + R didn&#;t work for you, try out the Option/Alt + Command (⌘) + R when you boot up to activate Internet Recovery Mode.

Now, you can access an Apple server to download the latest macOS version. Do note that if your Mac is not running Sierra or later, it will install the macOS version that came preinstalled with the Mac.

Sticky Note: You can also use the Shift + Option/Alt + Command (⌘) + R on your Mac running Sierra or later to install the macOS version that came preinstalled.

Keep This in Mind If Your Mac is Running Older macOS Than Sierra

It&#;s worth keeping in mind that the Mac running older macOS version than macOS Sierra introduced in doesn&#;t have all the Recovery options. This could well be the reason behind the ill-functioning of the macOS recovery.

What If Your Older Macs Running macOS X Snow Leopard or Earlier

Does your Mac support recovery partition? If your Mac computer is running OS X Snow Leopard or older, it won&#;t be equipped with a Recovery partition. In this scenario, you need to use the original discs that came preinstalled with your Mac to get the work done.

Just in case you don&#;t have those discs, you can purchase Snow Leopard ($25) from Apple.

How to Check if Recovery Partition is Working on Mac

At times, macOS recovery partition just doesn&#;t seem to kick in, even when you follow all the right rules. So, if you have got everything right but still can&#;t activate or use it, be sure to check if the recovery partition is functioning properly.

Step #1. Shut down your Mac [Simply click on the Apple () menu and select Shut Down]. Now, you need to hold down the Command (⌘) + R keys and press the Power button.

Step #2. Now, make sure to hold down the Command (⌘) and R keys until the Apple logo shows up on the screen. After that, release the keys.

Step #3. Next, allow the Mac to enter recovery mode.

Note: On the latest macOS versions, you will see macOS Utilities; while in the old macOS versions, OS X Utilities will appear.

If this screen has appeared, there is no problem with your Mac. Now, go ahead and reinstall the macOS as usual.

But just in case a blank screen appears on the screen or the Mac boots up to a normal screen, the Recovery partition is not working.

Use Terminal to Check If Your Mac Has Recovery Partition

With the help of Terminal, you can quickly check out if your Mac has Recovery partition or not.

Step #1. Launch Terminal app on your Mac and then enter the diskutil list. Now, a list of all the volumes and partitions will appear on your computer.

Step #2. Next, the first drive (/dev/disk0) should feature a partition. Now, try using the Command (⌘) + R key combination again to see if have resolved the macOS recovery issues on your Mac.

Try Out This Hack to Force Recovery Partition to Appear

Some times, macOS recovery partition seems to have completely disappeared without any reason what-so-ever. If you are staring at this scenario, reset PRAM,or reset SMC . To do so, shut down your Mac. After that, hold down Command (⌘) + Option + P + R during the booting process.

When you hear the chimes sound, release the keys. Now, use the Command (⌘) + R process to see if the macOS Recovery has appeared. If it has, you are good to go!

If none of the tricks have worked, it&#;s time to get on with the possible solutions to reinstall macOS without the recovery partition. But before getting started, ensure that you have backed up your Mac using Time Machine.

Restore a Mac Without Recovery Partition

There could be more than one reason why recovery mode may not work on your Mac. For instance, it could be due to sudden freezing, if Recovery partition is missing/broken or the disc is completely damaged. Fortunately, you can restore your Mac even without the Recovery partition. On newer Macs, the process is a little easy as compared to the older ones.

There are a couple of straightforward ways to restore a Mac without a recovery partition.

  • Use Internet Recovery to reinstall macOS on Mac
  • Create a bootdrive to install a copy of macOS from

Solution #1. Use Internet Recovery to Reinstall macOS

Probably the best way to reinstall macOS on Mac even without a recovery partition is to use internet recovery. Moreover, modern Macs can boot directly from an internet connection without relying on the recovery partition.

Step #1. Turn down your Mac. Then, hold down Command(⌘) + Option/Alt + R keys and press the Power button.

Step #2. Now, make sure to press these keys until a spinning globe or the message &#;Starting Internet Recovery&#; appears on the screen.

Step #3. When the macOS Utilities screen shows up, click on Reinstall macOS. After that, go through the installation process.

It&#;s worth reiterating that it only supports the networks using WEP and WPA security. You may face issues if you are using a proxy/PPPoE network.

Solution #2. Create a macOS Bootable Installer on a Flash Drive

Just in case, you are unable to access Internet Recovery, create a bootable installer from a flash drive. There are a couple of major requirements for making a bootable install drive.

  • #1. A GB Flash Drive (Minimum Requirement): Make sure the flash drive is at least 12GB in size). Keep in mind that it will completely wipe out the USB flash drive. So, don&#;t fail to save all the files upfront
  • #2.Installation File: The process of getting the installation file varies based on a macOS version

How to Get macOS Installation Files

The process of getting installation files slightly differs from one macOS version to the other. So, follow the below steps to get them with ease.

Get Catalina Installation File If Your Mac is Already Running Catalina

Just in case, your Mac is already running Catalina, you will need to get the installation file from the Mac App Store. To do so, launch the Mac App Store → head over to the Catalina page. Then, click on Get. Now, you will get the option to download the installers. Make sure not to click on install as you will require the installation file later.

Get Catalina Installation Files If Your Mac is Running Mojave

On your Mac running Mojave, head over to System PreferencesSoftware Update.

Now, wait for some time until your Mac has searched for the latest update to macOS.

When it shows the operating system updates available for download, download the installation files. Make sure to copy the installation file before installing so that you can have access to it to create a bootable installer.

Make a Bootable macOS Installer

Creating a bootable installation of macOS has become pretty straightforward (since OS X Mavericks) now as it requires a single command in Terminal. What&#;s more, createinstallmedia command also lets you make a bootable copy of an installer on any drive connected to your Mac.

Again, it&#;s worth keeping in mind that createinstallmedia command will erase everything on your external disk. So, make sure to save your important files without any fail.

Step #1. To get going, plug in an external drive. Make sure it has at least 8GB space. (12GB would be a preferred option).

Step #2. Now, open Disk Utility. Simply, press Command (⌘) + spacebar and type Disk Utility.

Sticky note: If your Mac is running macOS High Sierra or later, click on the View drop-down and select Show All Devices from the options. Now, you can view the external root drive along with the volume.

Step #3. Now, you need to choose the root drive in the sidebar and hit Erase. After that, be sure to select Mac OS Extended (Journaled) as the Format and GUID Partition Map as the Scheme.

Step #4. By default, the drive will be named &#;Untitled&#;. However, you can choose to give it a suitable name.

Sticky note: In the Terminal command, simply replace the term USB with the name you have just given to your drive.

Step #5. Make sure to click on Erase again. Now, you need to wait for some time until Disk Uitlity has successfully created partition and set up the drive. After that, click on Done.

Step #6. Next, launch Terminal on your Mac and then copy the below-given text that corresponds to the macOS version you want to install. After that, click Enter/Return. Then, enter your user password and hit the return key.

createinstallmedia Commands for Different macOS Versions

createinstallmedia command will vary based on the macOS version you wish to use. So, make sure to find the right one.

Catalina

sudo /Applications/Install macOS Catalina.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume

Catalina beta

sudo /Applications/Install macOS Catalina Beta.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume --nointeraction --downloadassets

Mojave

sudo /Applications/Install macOS Mojave.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume

High Sierra

sudo /Applications/Install macOS High Sierra.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume

Sierra

sudo /Applications/Install macOS Sierra.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume --applicationpath /Applications/Install macOS Sierra.app

El Capitan

sudo /Applications/Install OS X El Capitan.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume --applicationpath /Applications/Install OS X El Capitan.app

Yosemite

sudo /Applications/Install OS X Yosemite.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume --applicationpath /Applications/Install OS X Yosemite.app

Mavericks

sudo /Applications/Install OS X Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume --applicationpath /Applications/Install OS X Mavericks.app

Step #7. Now, you will get a warning saying it will erase the drive. To continue press Y and hit Return.

Step #8. Next up, Terminal app will copy the installer file to the drive. Once it&#;s done, you will get the confirmation &#;Copy complete and Done&#;.

That&#;s it! You have created the installer on the external drive, which you can use to install multiple copies of macOS.

Side Note:

  • Once the bootable installer is ready, you can simply plug the external drive into the Mac and start up the Mac by holding down the Option/Alt key while it is booting up
  • When the Startup Manager appears, click on your external drive to choose it as the startup disk. Now, the computer will start up in Recovery Mode. After that, click on Install macOS and hit Continue. Next, the macOS version will begin to install on your Mac

Install macOS from the Bootable Installer

If you had already created a bootable installer, you can use it to reinstall macOS at any time you want. To do so, follow the steps given below.

Step #1. To get going, be sure the bootable installer (USB flash drive) is connected to your Mac.

Step #2. Turn down your macOS device. After that, hold down Option/Alt and press the Power button.

Step #3. Now, the startup device list window would show up featuring a yellow drive with the Install option below it. Click on it and then press Return.

Step #4. Next, select the Disk Utility and choose the drive under the Internal option.

Step #5. Next up, click Erase and then give a suitable name to the drive.

Step #6. Make sure the Format is Mac OS Extended (Journaled) and the Scheme is GUID Partition Map.

After that, click on Erase and hit Done.

Step #7. Up next, click on Disk Utility and choose Quit Disk Utility.

Step #8. Click on Install macOS and hit Continue.

Now, go ahead with the instructions to install macOS options. Along the way, choose Macintosh HD as the installation disk and click Install.

After that, wait for the macOS to be installed peacefully on your hard drive.

After the process is over, you will have a new installation of macOS along with a Recovery partition.

Side Note: Now, you might see an alert. &#;This copy of the Install [macOS name] application can&#;t be verified. It may have been corrupted or tampered with during downloading.&#; Simply, adjust the date and time in macOS to get rid of it.

Wrapping Up&#;

There you go! Hopefully, you have sorted out the macOS recovery issues and reinstalled the latest macOS version or cleaned up your Mac. Especially when dealing with an issue of such magnitude, it pays to have multiple alternatives so that you don&#;t get stuck into a limbo, doesn&#;t it?

You may also like to explore:

Did you find this guide helpful? Share your valuable feedback with us in the comment section.

iGB app
iGeeksBlog has affiliate and sponsored partnerships. We may earn commissions on purchases made using our links. However, this doesn’t affect the recommendations our writers make. You can read more about our review and editorial process here.
Author
Nikhil runs iGB’s official YouTube channel. He is the official lensman of iGB and GB’s small studio is Nikhil’s playground, where he does all wonders with his remarkable signature. When Nikhil is not in his studio, you may spot him in a gourmet restaurant, chomping his way through some delicious food. He is a great traveler, who can go for long drives in search of good food.
Sours: https://www.igeeksblog.com/mac-recovery-mode-not-working/
Mac Won't Boot into Safe Mode/Recovery Mode - Fixed

Mac Recovery Mode not working? Try these simple solutions

By Connie | Posted to Home > Mac Data Recovery Tips, updated on October 14th, |

Summary: This article helps you troubleshoot the Mac Recovery Mode not working issue with testified solutions. More importantly, it helps reinstall macOS even if Recovery Mode not working.

Boot your Mac in Safe Mode

Mac Recovery Mode can be a lifesaver when your MacBook won't turn on. But the damn macOS Recovery mode is not working at this critical moment. How can you get your Mac computer running again?

You are in the right place. This article will tell you how to fix the Mac Recovery Mode not working issue. And also, it helps you restore your Mac or reinstall macOS when Recovery Mode not working.

Mac won't boot into Recovery Mode, what to do:

How to check if recovery partition is working on Mac

Commonly, after you press the Command + R keys during your Mac re-startup, you'll see the macOS utilities or Mac OS X utilities.

Reinstall macOS in macOS Recovery mode

However, you run into one of the following situations this time, which also indicates that the recovery partion on your Mac is out of work:

  • You've booted into the normal mode and see your familiar desktop.
  • macOS utilities in macOS Recovery mode have frozen up.
  • A blank or black screen has occurred on your Mac.

Mac Recovery Mode not working, how to fix it?

All the above situations manifest that the macOS Recovery Mode is not working. You can reboot your Mac into Recovery Mode once again. If there are no changes, try the following solutions.

Check if your Mac has the recovery partition

macOS Recovery is launched in with OS X Lion. For Mac machines run Mac OS X Snow Leopard and older, they are not delivered with a recovery partition.

That's why you fail to start in Mac Recovery Mode. You can upgrade your Mac to use macOS Recovery to reinstall macOS or use other recovery utilities.

Check if Command R not working

Command R keys are vital for entering Recovery Mode. If your Command R not working, you can't start in Mac Recovery Mode.

So, you'd better check if your Command R keys work well. If not, find out the reasons, or if necessary, change a keyboard.

Fix Command R not working

How to restore your Mac if Recovery Mode not working

If the macOS Recovery Mode still doesn't work, your recovery partition is probably corrupted. In this situation, how can you restore your Mac or reinstall macOS?

Mac Internet Recovery mode is the best alternative. The Internet Recovery Mode connects directly to Apple's server to offer the recovery utilities as Recovery Mode does.

With Mac Internet Recovery, you can restore your Mac from Time Machine backup, reinstall OS, use Disk Utility to check disk errors. The requirement for using Internet Recovery Mode is the available network. It only supports networks using WEP and WPA security.

To boot into Internet Recovery Mode, you should follow these operations:

  • Press and hold Command - Option/Alt - R or Shift - Option - Command - R keys when rebooting your Mac.

Note: Using Shift-Option-Command-R during startup, you can get the macOS that came with your Mac or the closest version. Using Option-Command-R at startup, you'll get the latest macOS that is compatible with your Mac model.

  • When you see a spinning globe and the message "Starting Internet Recovery" appears on the screen, release the keys.
  • Wait for the progress bar to load. Then, you'll see the macOS Utility window on the screen.

Start Mac in Internet Recovery

Then, if you want to reinstall macOS, select the Reinstall macOS utility and follow the onscreen steps to reinstall a new copy of macOS.

For an M1 Mac, if the Recovery Mode is not working, it always auto-boot in Internet Recovery Mode. The precondition is that your Mac is connected to the Internet well.

Internet Recovery on Mac not working, what to do?

If unfortunately, the Internet Recovery on your Mac still cannot work, your Mac probably won't boot up either.

But don't worry, there still have solutions to start up your Mac and restore your macOS. For an Apple M1 Mac, it has the second Recovery Mode that called "Fallback Recovery OS Mode", which is a fallback mode just in case Recovery fails.

Or, you can also boot your Mac into DFU Mode (Only available in macOS and later). It is a state without loading the OS. You can do some slight changes in DFU Mode to make the Recovery Mode back to work and restore your Mac as well.

If the mentioned two modes are not available on your Mac, try the following solutions to restore your Mac.

Use Time Machine backup

The precondition to use Time Machine backup is you have backed up your Mac to an external hard drive or USB drive. If you haven't backed up your Mac recently, you can jump to the next solution.

Here's how to restore your Mac with Time Machine backup:

  • Turn off your Mac.
  • Connect the Time Machine backup drive to your computer.
  • Press the power button and simultaneously hold down the Option key.
  • Release the key until seeing the startup options list on your screen.
  • Select the Time Machine backup drive and press Return.

Then, your Mac will boot from the OS installer on your backup drive.

Create a bootable installer

If you don't have an original disk preinstalled with an OS installer, and the Internet Recovery Mode also not working due to network issues, the last way is to create a bootable installer and install macOS from it.

Since this method is complex, here we show a video about how to create a bootable installer for you. You can follow this video carefully.

Create a bootable macOS installation disk

Or, the following part will offer the detailed steps.

Preparations:

1. A USB drive formatted as Mac OS Extended with at least 16GB (For Big Sur installer, 64GB is better) in size.

2. Get macOS installation files. Find a healthy Mac, download the current macOS of the healthy Mac, like Catalina in the App Store. Note that don't click on install at this time. If you want an update of the current system, go to System Preferences > Software Update. Then download the macOS installation files. The installation files are in the Application folder by default.

3. If your Mac with Apple T2 or M1 chip (Check in Apple menu > About This Mac), you should enter macOS Recovery Mode > Startup Security Utility > check Allow booting from external media.

Next, create a bootable installer:

Create a bootable macOS installer

  • Connect the USB drive to the healthy Mac.
  • Open Finder > Applications > Utilities > Terminal.
  • Type the following commands in Terminal and press Enter. Here the Applications means that the installation files are in the Application folder of the Mac. MyVolume means where the installation files will be saved (the name of your USB drive). Here take macOS Catalina as an example:

Note: The command line is suitable for other macOS versions, only replace /Install\ macOS\ Catalina.app/ to the desired version, like /Install\ macOS\ Big\ Sur.app/.

  • Type your administrator password if required and press Enter.
  • Type Y when warning you that it will erase the USB drive and press Enter.
  • Then, the installation files on the Mac will be copied to the USB drive.

When the copy work is done, it will show "Copy complete and Done". Now, you've created the macOS bootable installer on your USB drive successfully. You can eject the USB drive.

The last, install macOS from the bootable installer:

For an Apple Silicon M1 Mac and Intel-based Mac, the operations are different.

Note: Your Mac should connected to the internet and compatible with the version of macOS you'll install.

For an Apple M1 Mac:

  • Attach the USB drive with the bootable installer to your unbootable Mac.
  • Hold the power button when booting your Mac until the startup options window appears.
  • Select the volume that contains the bootable installer.
  • Follow the instructions to finish the installation.

For an Intel-based Mac:

  • Connect the USB drive with the bootable installer to your unbootable Mac.
  • Hold the Option/Alt key at once after rebooting your Mac.
  • Release the Option/Alt key when you see the bootable volumes.
  • Choose the volume having the bootable installer.
  • Select your bootable USB drive
  • Follow the instructions to finish installation.

After reinstalling macOS or OS X, you can restore the data from your backup (If had).

Final thoughts

With a set of recovery tools, macOS Recovery plays an important role in restoring your Mac. However, the macOS Recovery Mode not working issue is not rare, which brings a lot of troubles for you.

Hopefully, you can try the solutions in this article to fix the macOS Recovery mode not working problem. Moreover, get some alternatives to reinstall macOS and restore your Mac when Mac Recovery mode not working.

FAQs about Mac Recovry Mode not working

1. Why is Recovery Mode not working on Mac?

Here are the possible reasons:

  1. The temporary bugs in your Mac OS.
  2. Your keyboard is faulty.
  3. The way to enter Recovery Mode is wrong.
  4. Your Mac has no recovery partition.
  5. The recovery partition on your Mac is corrupted or damaged.

2. What you can do with macOS Recovery Mode?

In Mac Recovery Mode, you can do the followings:

  1. Use the Restore from Time Machine Backup utility to retsore your unbootable Mac, or recover the lost important files.
  2. Utilize the Reinstall macOS feature to reinstall the system when the current one has something wrong like frequent system crashes, running slowly.
  3. Use the Terminal to do some tasks like checking the conditions of your Mac and fix some errors.
  4. Take advantage of the Disk Utility First Aid to check and repair internal and external disk issues.
Sours: https://iboysoft.com/mac-data-recovery/mac-recovery-mode-not-working.html

Similar news:

Mac startup key combinations

Learn about the Mac features and tools that you can access by holding down one or more keys during startup. 

On an Intel-based Mac

To use any of these key combinations, press and hold the keys immediately after pressing the power button to turn on your Mac, or after your Mac begins to restart. Keep holding until the described behavior occurs.

  • Command (⌘)-R: Start up from the built-in macOS Recovery system. Or use Option-Command-R or Shift-Option-Command-R to start up from macOS Recovery over the internet. macOS Recovery installs different versions of macOS, depending on the key combination you use. If your Mac is using a firmware password, you're prompted to enter the password.
  • Option (⌥) or Alt: Start up to Startup Manager, which allows you to choose other available startup disks or volumes. If your Mac is using a firmware password, you're prompted to enter the password.
  • Option-Command-P-R:Reset NVRAM or PRAM. If your Mac is using a firmware password, it ignores this key combination or starts up from macOS Recovery. 
  • Shift (⇧):  Start up in safe mode. Disabled when using a firmware password.
  • D: Start up to the Apple Diagnostics utility. Or use Option-Dto start up to this utility over the internet. Disabled when using a firmware password.
  • N: Start up from a NetBoot server, if your Mac supports network startup volumes. To use the default boot image on the server, press and hold Option-N instead. Disabled when using a firmware password.
  • Command-S: Start up in single-user mode. Disabled in macOS Mojave or later, or when using a firmware password.
  • T: Start up in target disk mode. Disabled when using a firmware password.
  • Command-V: Start up in verbose mode. Disabled when using a firmware password.
  • Eject (⏏) or F12 or mouse button or trackpad button: Eject removable media, such as an optical disc. Disabled when using a firmware password.

If a key combination doesn't work at startup, one of these solutions might help:

  • Press and hold all keys in the combination together, not one at a time. 
  • Shut down your Mac. Then press the power button to turn on your Mac. Then press and hold the keys as your Mac starts up. You might need to wait a few seconds before pressing the keys, to give your Mac more time to recognize the keyboard as it starts up. Some keyboards have a light that flashes briefly at startup, indicating that the keyboard is recognized and ready for use.
  • If you're using a wireless keyboard, plug it into your Mac, if possible. Or use your built-in keyboard or a wired keyboard. If you're using a keyboard made for a PC, such as a keyboard with a Windows logo, try a keyboard made for Mac.
  • If you're using Boot Camp to start up from Microsoft Windows, set Startup Disk preferences to start up from macOS instead. Then shut down or restart and try again.

Published Date: 

Sours: https://support.apple.com/en-us/HT


5049 5050 5051 5052 5053