How do I fix my Bluetooth mouse lag?
Way 2. Change Improper Bluetooth or Wireless Settings that Causes the Mouse Lag
- Enable Bluetooth Devices to Find the PC. Right-click the Bluetooth icon on the taskbar. Select the Open Settings.
- Disable the Power Management. Use Windows shortcut keys Win + X.
Why does my mouse keep freezing Windows 10?
Pointer freezes Windows 10 – According to users, the common problem with your mouse is the pointer freezing. Cursor freezes then disappears – Sometimes your cursor can freeze and then disappear. This can be a big problem, and its most likely caused by a problematic driver.
How do I fix a slow mouse response?
A slow pointer speed may make it seem like your mouse is unresponsive or delayed. Open the Windows Control panel and type Mouse into the search box. Select the Mouse search result and open Mouse Properties. Navigate to the Pointer Options tab and raise the Motion sections slider, moving it closer to Fast.
Why is my wireless mouse so slow?
Mouse cursor or pointer moving slow. If your mouse cursor is moving slowly, ensure that the latest driver is installed. You may then want to change the touchpad settings and adjust the speed of the pointer. Click on Sensitivity and move the slider under Pointer Speed to adjust the same.
How do I fix my mouse lag?
Solution 1 – Enable / Disable Scroll Inactive Windows
- Navigate to Settings > Devices > Mouse & Touchpad.
- Now locate the Scroll Inactive Windows option and disable / enable it.
- Try disabling and enabling this option a few times and check if the issue is resolved.
Do wireless mouses lag?
If your results are off by more than a few milliseconds, wireless lag may be the cause. Short of switching to a wired keyboard or mouse, there are a few tricks for reducing serious input lag. Almost all wireless models exhibit some form of input lag, but its often so small that youd hardly ever notice.
How do I fix my stuck mouse on Windows 10?
Hold the Windows Key and Press X. Choose Control Panel -> “search for Mouse” or choose “mouse“. Usually, the touchpad setting is the last tab, it may have any name depending on your device manufacturer such as “Device Settings”, “Synaptics”, or “ELAN” etc. Click on it, and make sure that it is Enabled.
How do you fix a frozen mouse?
Fix 2: Try the function keys
- On your keyboard, hold down the Fn key and press the touchpad key (or F7, F8, F9, F5, depending on the laptop brand youre using).
- Move your mouse and check if the mouse frozen on laptop issue has been fixed. If yes, then great! But if the problem persists, move on to Fix 3, below.
Why does my mouse keep stopping?
The reasons why your mouse may continuously freeze is quite numerous. It could be due to a technical issue, such as low batteries, or it could be due to a connectivity issue, such as a loose or damaged cord. Worst case scenario, your mouse could be defective.
Why does my mouse lag in Windows 10?
Windows 10 mouse lag in games – According to users, this issue can often appear in games. This can be a big problem since your game performance might be reduced. Windows 10 mouse stutter – This is another problem that users reported. This issue is usually caused by a corrupted driver or your mouse configuration.
How do I calibrate my mouse in Windows 10?
To get there:
- Navigate to the Windows Control Panel.
- Open the mouse menu.
- Open your touchpad driver (if theres a link to it).
- Set the pointer speed to max.
- Navigate to the pointer options tab in the Mouse Properties window.
- Move the pointer speed slider all the way to the right and uncheck Enhance pointer precision.
How do I increase mouse sensitivity?
To change the speed at which the mouse pointer moves, under Motion, move the Select a pointer speed slider toward Slow or Fast.
Change mouse settings
- Open Mouse Properties by clicking the Start button. , and then clicking Control Panel.
- Click the Buttons tab, and then do any of the following:
- Click OK.
Why isnt my wireless mouse working?
Sometimes the receiver gets out of sync with the wireless devices, causing them to stop working. Then press the Connect button on the keyboard and/or mouse and the flashing light on the USB receiver should stop. Your receiver is now synced with the keyboard and/or mouse.
How do I know if my wireless mouse is connected?
Method 1 Connecting a Mouse with a Wireless Receiver
- Plug in your mouses receiver. The receiver should fit into one of your computers USB ports.
- Make sure that your mouse has batteries or is charged.
- Turn on your mouse.
- Press your mouses Connect button.
- Move your mouse around to test the connection.
How do you reset your wireless mouse?
Check the bottom of your mouse, and turn the power to the On position. Look under the power button for the reset button. If one is there, hold the reset for five full seconds to reset the mouse.
How do I reduce input lag?
Im going to list some obvious and not so obvious ways to reduce lag.
- Use game mode (this is obvious).
- Disable HDMI-CEC.
- Disable any power saving settings or ambient screen dimming.
- If possible, test each HDMI input.
- Using TV speakers add input lag.
How do I fix my mouse that stutters?
Realtek audio card might interfering your mouse, which can cause the lagging problem.
Start with the first solution and work your way down the list until you find the one that works for you.
- Reinstall the mouse driver.
- Update the graphics card driver.
- Check the local area network settings.
- End Realtek audio.
- Other options.
Why is my mouse not working?
If the mouse is working in Safe Mode, there is likely a driver or software conflict. To fix this problem, follow the steps below. Expand the mouse (mice) option in Device Manager by clicking the + symbol. Remove all mice listed by highlighting each device and then pressing the delete key on the keyboard.
Are wireless mouses good for gaming?
Both wired and wireless gaming mice are more comfortable while playing games, more accurate, and more customizable and have more buttons than a regular mouse. For years, wireless wasnt a good option on gaming mice because of latency or lag.
Are wired mouses better for gaming?
An the increased lag in signal transmission, makes the mouse less desirable for gaming. Wired mice present fewer delays than their cordless counterparts do, making them the better choice for most gamers who value every detail regarding performance.
Are wired mouses better than wireless?
Wired Mice. Someone might choose a wired mouse over a wireless mouse because, well, its not wireless. Wireless devices are, by default, a tad bit slower than wired devices since they need to transmit information wirelessly. This little bit of lag is especially important for gamers.
Why does my Bluetooth mouse keep disconnecting Windows 10?
If your Bluetooth mouse suddenly disconnects or stops working, this can indicate that Windows disconnects the PCs radio to save power. Double click the Bluetooth adapter to open its properties: Switch to the Power Management tab and uncheck Allow the computer to turn off this device to save power.
Why does my mouse keep connecting and disconnecting?
Sometimes this Mouse keeps disconnecting problem occurs simply because youve plugged your mouse in a faulty USB port. You can plug it out and insert in another port to see if it fixes the problem. Try a different (and functioning) mouse. Check if the Mouse keeps disconnecting issue has been resolved.
Why does my wired mouse keep disconnecting?
If youre experiencing mouse lockups or failures, it may be because your computer is automatically turning off the power to a USB Root Hub. Go to your Control Panel > System > Hardware tab > and click on the Device Manager button. Allow the computer to turn off this device to save power is checked by default.
How do I fix my wireless mouse?
- Fix 1: Remove USB receiver and wireless mouse battery for 5 seconds.
- Fix 2: Go to RUN (Win Logo + R) and type “devmgmt.msc” to open device manager.
- Fix 3: If above fixes are not working for you then find a solution from the official Microsoft website.
Why is wireless mouse jumpy?
The cursor jumps or sometimes doesnt react at all. The problem is due to the receiver being too close to the USB port. It picks up electronic noise generated by the computers parts, interfering with the signals passing from the mouse.
How do you reset an air mouse?
Factory Reset Low Sensitivity
- Remove one of your batteries.
- Hold the LEFT and RIGHT direction buttons.
- Install the battery and continue holding the buttons until the green LED is blinking.
- Hold the remote still and flat, and release the buttons.
- The LED will turn off after self calibration is complete.
Where is the reset button on the Logitech wireless mouse?
Locate the oval-shaped reset button on the bottom of the mouse and press it down. Hold the button down for at least four seconds.
How do I reconnect my Logitech mouse?
Plug the Unifying receiver into a USB port on your computer. Press the connect button on the bottom of the mouse. Run the Unifying software to pair your device to the receiver and follow the instructions on your screen. If you dont have the Logitech Unifying software, you can download it.
How do I fix my Logitech mouse not working?
Fix or rule out the potential problem sources listed above. Insert fresh batteries in your mouse. For instructions on changing your mouse battery, see answer Plug your receiver directly and securely into a working USB port on your computer.
Photo in the article by “Wikipedia”
Here’s how I fixed the stuttering and lag issue with my Logitech MX Master working with Windows 10 Home and Pro:
- Open up the System screen within the Control Panel (keyboard shortcut: Win+Pause/Break)
- Open Device Manager from the list of links on the left panel
- Expand the Network adapters section to list your network adapters (e.g. WiFi, Bluetooth, VPN, etc.)
- Double click your WiFi network adapter to open the Device Properties dialog (in my case this is a Dell Wireless ac)
- Switch to the Advanced tab (if you cannot see an Advanced tab then close this dialog and double click the other Network Adapters until you find one that has it)
- Within the Property list select Bluetooth Collaboration
- Change the Value of the dropdown list from Auto to Disabled
- Click OK to save changes
The WiFi network adapter will restart the device so expect to lose network access for a moment before network access is restored. Happy days.
Update 1: Yeah the above helped but didnt fix it entirely, somehow unticking the Enable pointer shadow option within the Mouse Properties dialog (open Start then type in Mouse) makes a big difference, I do still notice some stutter when copying files or using Google Photos.
Update 2: Uninstalling the Realtek AC97 software from Add/Remove Software and restarting did wonders on-top of the above steps. No more stutter!
I'm a WordPress Plugin developer, UAV & Raspberry Pi enthusiast and general tinkerer. This visser.io domain serves as my development playground for non-WordPress Plugin projects. View all posts by Michael Visser
- Here and now 2018 cast
- Thinkorswim point and figure chart
- Jhene aiko mp3 free download
- Q50 high pressure fuel pump
- Acer laptop bios reset jumper
A stuttering mouse is by far one of the most common complaints by computer users. A “stuttering” mouse is when the mouse pointer moves erratically. At the time of writing this guide, our How to Fix Windows 10 Mouse Lag YouTube video has nearly 65, views and comments filled with plenty of stories about Windows 10 and computer mice just not playing well together.
If your mouse is stuttering and you can’t figure out why, here are the most common fixes we’ve collected over the years.
Also, be sure to check out our YouTube channel where we posted a short video going over some reason why your mouse may lag and how to fix it:
Clean Your Mouse Innards
Mice and keyboards are always in contact with your hands and tend to accumulate gunk at a worrying rate. Plenty of viewers and readers have reported that eventually, the problem behind their erratic mouse behavior was the presence of long but barely visible hair.
In short, before you get too deep into the troubleshooting process, check if there isn’t a bit of dirt messing with the optical sensor.
Change Your Mouse Surface
Try a different surface to ensure that the stutter isn’t the result of a surface your mouse has a hard time detecting, which could be glass or bumpy surfaces. Try a mousepad to eliminate this issue from your list of potential problems.
If you’re using a wireless mouse, it most likely uses Bluetooth as its communication technology. While Bluetooth works well, troubleshooting Bluetooth mouse problems deserves an article of its own.
Try the following tips to see if they resolve the issue:
- Check that your batteries have enough charge and are firmly seated.
- Unpair and then pair your mouse.
- Turn off Wi-Fi or Bluetooth devices in the area to check for signal saturation.
- Decrease the distance to your computer or reposition the Bluetooth antenna, if applicable.
Some mouse brands, such as those from Logitech, offer their wireless dongle in addition to Bluetooth. Switching from the dongle to Bluetooth or vice versa may solve your issue as well.
Disable the Wallpaper Slideshow
If you’ve set your Windows 10 computer to cycle through a set of wallpapers, your mouse pointer will stutter and freeze every time the changeover happens. We’ve tested this on various Windows 10 PCs and it happens to all of them.
If your system is set to cycle wallpapers frequently, such as every few minutes, it could cause this issue. The solution is to set the interval to once a day or disable the slideshow and manually change your wallpapers.
Disable Scroll Inactive Window
This feature does what it says: You can scroll inside an inactive window by having your mouse pointer over them. While this can be a time saver for people who have to work with lots of documents and a word processor, for some mysterious reason, turning this feature off resolved mouse stuttering for many users. We don’t know why, but it’s worth trying just in case:
- Open the Start Menu and select the Settings Gear.
- Select Devices
- Select Mouse.
- Toggle Scroll inactive windows when I hover over them to Off.
- Check to see if your laggy mouse works properly again.
Disable Fast Startup
Many users report that Disabling Fast Startup can fix the stuttering mouse issue on Windows
Fast Startup is on by default and increases your computer boot time. Most people these days rarely reboot their computers, and even if they do, SSDs and fast CPUs make the process quick. For this reason, it’s okay to disable Fast Startup.
Here’s how to disable it:
- Open the Start Menu and type Control Panel, then select it from the results.
- Select Hardware and Sound > Power Options.
- Select Choose What the Power Buttons Do.
- Select Change settings that are currently unavailable.
- Uncheck Turn on Fast startup. Click Save Changes.
Shut your computer down and start it up again, then check if the mouse stuttering issues are gone.
Update or Reinstall Your Mouse Drivers and Software
Your mouse driver tells Windows how to talk to the hardware. If your mouse came with its software application, that application could be part of the problem as well.
It’s worth downloading the latest drivers for your mouse and installing them manually after uninstalling the old ones. Even if the old drivers and software weren’t the cause of stuttering, the new downloads might include fixes for mouse stuttering issues.
Update or Reinstall Your GPU Driver
Your GPU drivers and software can also be a source of buggy mouse performance. Get the latest drivers and software from your GPU maker’s website. Consider using software such as DDU (Display Driver Uninstaller) to ensure that the old version is completely uninstalled. However, only do this if a manual update doesn’t resolve the issue.
If you’ve overclocked your CPU, GPU, RAM or are pushing other components harder than they are designed for, reverse those changes. Switch everything to their factory clock and voltage settings to eliminate hardware instability as the cause of your mouse stutter. If the problem goes away, you may want to have a lower level overclock if you’re set on pushing your system.
Check for High System Usage
While it’s relatively rare for a modern CPU to be so busy that it can’t handle your mouse pointer, malware or misbehaving applications can lock up a computer for brief moments, making it look like a mouse stutter.
- Open up the Task Manager.
- Switch to the Performance Tab.
- Arrange the processes by CPU usage and see if any of those applications show usage spikes when your mouse stutters.
- If a program or process is straining your CPU resources, you might want to consider uninstalling it or running a malware scan if you don’t recognize it.
- Its also worth checking the Memory and Disk columns to make sure neither of those are running at % too. If so, you might have to close the programs using up those resources or uninstall them.
Hopefully, one of the solutions above fixes your mouse stuttering problem. If not, post a comment here and we will do our best to help!
How to efficiently fix a lagging mouse in Windows 10 and 11
- Mouse lag can be very annoying and will affect your productivity so you should address the problem immediately.
- The causes for this problem are extremely wide, ranging from a poor connection to device issues.
- You should check the drivers and install the original version from the manufacturer.
- Enabling and disabling the Scroll Inactive Windows option from the mouse settings can clear this issue quickly.
XINSTALL BY CLICKING THE DOWNLOAD FILE
This software will repair common computer errors, protect you from file loss, malware, hardware failure and optimize your PC for maximum performance. Fix PC issues and remove viruses now in 3 easy steps:
- Download Restoro PC Repair Tool that comes with Patented Technologies (patent available here).
- Click Start Scan to find Windows issues that could be causing PC problems.
- Click Repair All to fix issues affecting your computer's security and performance
- Restoro has been downloaded by 0 readers this month.
Mouse lag is a major hindrance that will affect your user experience and it can cause frustrations, especially if youre working from home and cant get any task done in time because of this.
According to our research, this issue starts manifesting after switching to Windows 10, and it persists when using any other third-party software, but also extends to users trying out Windows
What is mouse lag and what are the causes?
Mouse lag is the delay that occurs between the actual physical movement of the mouse and the movement of the cursor on the screen.
There are many possible reasons for this issue but we will try to outline the most important, so you can better understand this problem:
➡ Connection problems
Connection problems are some of the most common causes of mouse lag. This is encountered with wireless mice but it can also happen with wired ones.
Having a long distance between the Bluetooth receiver and the mouse, a heavily tangled cable, or a problem with the USB port/cable can cause this lagging effect.
Furthermore, issues like this occur if your wireless Bluetooth connection is perturbed by another similar connection. As an example, this could happen if you have a wireless speaker connected to the same PC.
➡ Depleted batteries
We know it sounds like a trivial problem but if you have a wireless mouse, you should check the batteries. Most of them have a light signaling the battery level.
Even if you dont have any warning signs, you should still check the batteries and replace them to get this out of the way because this might be causing you to experience lag.
➡ Outdated or problematic drivers
This is one of the top problems, especially if you have a more sophisticated gaming mouse. They can have dedicated drivers that need to be updated often to ensure that the utilization of the device is not badly affected.
So even though the system will install a default driver that will make the mouse function, it can cause lagging problems and you will definitely not use the mouse at its full potential.
Many mouse-related issues can occur both on Windows 11 and Windows 10, and we covered the following problems in this article:
- Windows 10 and 11 mouse lag in games This can be a big problem since your game performance might be reduced considerably, besides the actual frustration you would feel
- Windows 11 and Windows 10 mouse stutter According to our readers, their mouse frequently stutters which makes it harder to perform everyday tasks, and the effects are even worse if you work with image processing tools
- Mouse freeze in Windows 11 and 10 Many readers reported that their mouse keeps freezing, but you should be able to fix this issue with one of our solutions
- Wireless mouse lag Windows 10 and Windows 11 This issue can affect both wired and wireless mice, but it appears more frequently while using a wireless device
- Mouse not moving This issue is usually caused by a corrupted driver or your mouse configuration, and can be fixed easily
How can I solve mouse lags in Windows 10 and Windows 11?
- Update the mouse driver
- Enable / Disable Scroll Inactive Windows
- Change the Palm Check threshold
- Set the touchpad sensitivity
- Change your mouse frequency
- Disable Fast Startup
- Change your Clickpad settings
- Roll back your drivers
- Connect your mouse receiver to a faster USB port
- Change the Power management options
- Disable the NVIDIA High Definition Audio device
- Disable the Realtek driver
1. Update the mouse driver
- Right-click the Start button and select Device Manager from the list.
- Select Mice and other pointing devices and double-click your mouse.
- Open the Driver menu, then click Update driver.
- In the next windows select the Search automatically for drivers option.
- If there are any new drivers, the system will install them and you will need to restart your PC for the changes to take effect.
- If you get the message that you allready have the best drivers for your device, you can click the Search for updated drivers on Windows Update.
- You will be redirected to the Windows Update section. Select View optional updates.
- Click on Driver updates to expand the section and look for any mouse driver.
- If you find one, check its box from the left and hit the Download and install button.
Several users reported that they fixed mouse lag issues simply by installing the official driver for their mouse.
In most cases, Windows 10 or 11 (depending on your OS), will automatically install the default mouse driver, and while that driver usually works, sometimes certain issues can occur.
If you’re using a branded mouse, check the manufacturers website and download the latest drivers for your mouse model.
In case you want to avoid going through all these steps and want to ensure that the correct drivers are installed, you could try using a powerful driver updater software like DriverFix.
2. Enable / Disable the Scroll Inactive Windows option
- Click the Start button and select Settings.
- Select the Devices option.
- Next, click on Mouse from the left pane.
- Now locate the Scroll Inactive Windows option and disable / enable it.
- Try disabling and enabling this option for a few times and check if the issue is resolved.
If you have trouble performing these steps, we also have a guide on what you can do if you cant access the Setting app.
- Press + and choose Settings.
- Choose Bluetooth and devices.
- Choose the Mouse option.
- Toggle the Scroll inactive windowswhen hovering over them option a few times and check if the issue persists.
3. Change the PalmCheck threshold in Windows
This solution applies only to Windows 10 operating systems, as Windows 11 doesnt have this option included.
- Press the + keys and choose Settings from the list.
- Choose the Devices option from the list.
- Next, click on Touchpad from the left pane and select Settings under Synaptics Touchpad.
- Now get the PalmCheck slider all the way to the left.
The procedure detailed in the steps above can help you solve the mouse lag problem by changing the PalmCheck threshold so make sure you try it. You can always change it back if it doesnt fix the problem.
4. Set the touchpad sensitivity
- Click on the Start button and select the Settings app.
- Now select Devices from the list.
- Select Touchpad from the left pane.
- Click on the Touchpad sensitivity menu and change it to High sensitivity or Most sensitive.
- However, if the clicks activate while youre typing you will need to turn back down the sensitivity.
- If youre not using the touchpad at all, you can disable it from the same window, by toggling off the Touchpad option from the top.
- Right-click Start and choose Settings.
- Click on Bluetooth and devices.
- Under the Gestures and interaction section, move the slider named Cursor speed and change the mouse sensitivity.
If youre using the touchpad, turning the sensitivity up will help you in this case. However, if youre only using the mouse, you can disable the touchpad.
5. Change your mouse frequency
Sometimes mouse lag problems can be related to its frequency. This issue usually affects wireless mice, and if your mouse is lagging, you might be able to solve the problem by adjusting its frequency.
To do that, open your mouse configuration software and change its frequency from Hz to Hz. After doing that, your mouse will start working normally.
If your mouse is connected through Bluetooth and its not working, read our article on how to fix your Bluetooth mouse.
6. Disable Fast Startup
- Press + , type control panel and choose Control Panel from the list.
- When Control Panel opens, select Power Options.
- Now click on Choose what the power button does.
- Click on Change settings that are currently unavailable.
- Uncheck Turn on fast startup (recommended) and click on Save changes.
To fix this problem, many users are recommending disabling the Fast Startup feature. This is a useful feature, but users reported that it can cause certain issues with your PC such as mouse lag.
To fix the problem, you need to perform the steps above. After disabling Fast Startup, the issue should be resolved, and your mouse will start working again.
If you cant get into Control Panel, check out our step-by-step guide on how to fix this Control Panel problem.
7. Change your Clickpad settings
- Type control panel in Windows search and select Control Panel from the results.
- Navigate to the Mouse section.
- Go to Clickpad settings.
- Navigate to Advanced, select Smart Sense and set Filter to 0.
To fix mouse lag issues on your PC you just have to change your Clickpad settings. This is relatively simple and you can do it by following the steps above.
After making these changes, the problem with the mouse lagging should be resolved.
Keep in mind that this isn’t a universal solution, as if you are using a desktop, then you won’t be able to find the Clickpad settings section, so this solution doesn’t apply to you.
8. Roll back your drivers
- Press the key + and select Device Manager from the list.
- Locate your mouse driver and double click it.
- Go to Driver tab and click on Roll Back Driver button if available. If the Roll Back Driver button is grayed out, this solution doesn’t apply to you.
If you’re experiencing mouse lag, you might be able to fix the problem simply by rolling back your drivers. Users reported problems with both mouse and Realtek Audio drivers, and after rolling them back, the issue was resolved.
After rolling back the problematic drivers check if the issue still appears. It’s worth mentioning that Windows might try to automatically update your drivers.
If that happens, the issue will reappear. To see how to stop that, be sure to check our article on how to prevent Windows from automatically updating specific drivers.
9. Connect your mouse receiver to a faster USB port
Users reported mouse lag while using a wireless mouse, and to fix the problem you just need to connect the receiver to a faster USB port. This could mean a USB or a Thunderbolt-enabled port.
Run a System Scan to discover potential errors
Run a PC Scan with Restoro Repair Tool to find errors causing security problems and slowdowns. After the scan is complete, the repair process will replace damaged files with fresh Windows files and components.
Even though faster is a relative term, it is safe to say that following the guidance below will be helpful:
- If using USB , then plug your USB dongle or cable into a USB port.
- If using USB , using a USB-C port will yeald faster reactions to your mouse.
- If using USB-C, then a USB-C with Thunderbolt will work faster.
After doing that, the issue was resolved, and the mouse lag disappeared completely.
If you want a fast mouse, you should also look at our selection of the best USB-C mice that you can buy right now.
Change the USB Hub power management options
- Right-click the Windows Start button and select Device Manager from the list.
- Double click the USB Hub device to open its properties.
- Go to the Power Management tab and uncheck Allow the computer to turn off this device to save power. Click OK to save the changes.
According to users, mouse lag can sometimes occur due to your power management settings. However, you should be able to fix the problem by performing the steps above.
Keep in mind that you need to repeat these steps for all USB Hub devices on your PC. After making the necessary changes, the issues with your mouse will be resolved.
Remember to check your USB port. If it doesnt work as expected, read our guide on how to fix your USB ports.
Disable the NVIDIA High Definition Audio device
- Click on Start and select Settings.
- Now choose the Apps option.
- Look for the GeForce Experience app, click on it and select Uninstall.
- Right click the Start button and select Device Manager.
- Locate NVIDIA High Definition Audio under Sound, video and game controllers.
- Right click it and choose Disable.
Some users claim that NVIDIA High Definition Audio and other audio drivers can sometimes cause these issues. If you’re using an NVIDIA card you can try the steps above.
Please make sure to decide to try this step only if there is no other solution to your mouse lagging issue.
To make sure that no lasting damage is possible, ensure that you have quick access to the Device Manager, to activate the devices quickly.
Disable the Realtek driver
Remove it from the startup list
- Right click the Start button and select Task Manager from the list.
- Click on the Startup tab.
- Look for Realtek Audio Manager in the list, click on it an select Disable from the bottom right corner.
After performing this step, try using your mouse again and check if the solution is solved. If it is not, then you could try the next step, but you will be doing so at your own risk.
Uninstall the Realtek audio driver
If you’re using Realtek audio, you should know that this issue can be caused by Realtek Audio Manager.
If disabling audio drivers doesn’t help, you might want to uninstall them by using the steps described below:
- Press + keys on your keyboard, and choose Device Manager.
- Navigate to Sound, video, and game controllers option and click it to toggle the drop-down.
- Right-click the driver you want to uninstall and choose Uninstall device.
- Tick the box next to the option Delete the driver software for this device.
- Click Uninstall.
Only attempt this if all the other solutions didnt resolve the problem.
If you decide to do so, as a precaution, make sure that you have the drivers for this device easily accessible so you can re-install them when needed.
Even though this step might seem counter-intuitive, some users have had success solving this issue by removing the Realtek Audio driver.
If the situation doesnt improve after uninstalling it, re-install the device by using the device manager.
How to avoid mouse lag issues
Now that you know where this pesky problem comes from and how to get rid of it, you should also learn how to prevent it in the first place.
We do have some advice that you should take into consideration when it comes to lag problems.
➡ Modify your mouse sensitivity or DPI value
DPI, meaning Dots Per Inch is a value used to determine the sensitivity of your mouse cursor while moving it across your screen by moving the device one inch.
For example, if your mouse has DPI, then moving the mouse one inch will cause the cursor to move pixels on your screen.
Mouse sensitivity can be customized either by using a software option (changing DPI) or by using physical customization features.
It is worth noting that most mice that allow physical customization are gaming-related peripherals.
Peripherals that allow you to change the sensitivity from their software work by modifying the DPI value.
To modify the DPI value, you will need to either use the Windows 10 and Windows 11 built-in sensitivity settings or resort to using the actual software that comes with your mouse.
Use the Settings app
- Press + and choose Settings from the menu.
- Click on the Devices option.
- Select the Mouse tab.
- Click on the Additional mouse options link.
- Choose the Pointer Options tab.
- Using the slider found in the Motion section, choose the desired mouse cursor speed.
- Tick the box next to the Enhance pointer precision option for a more precise movement.
- Click the OK button to apply the settings.
Mice that have this capability feature a special compartment inside the mouse case which holds weights of different values. By removing or adding weights to the mouse, the sensitivity can be customized.
Added to this, some mice also include a set of DPI changing buttons, which enable you to modify this value in a split second.
As you can see there are various ways in which to customize how your mouse reacts to being moved and considering these elements could be very helpful in the long run.
➡ Change to a wired/wireless mouse
This suggestion depends on the circumstances in which you encounter mouse lag at the time being.
If youre using a Bluetooth-enabled mouse while encountering issues, try using a wired mouse instead.
In case youre using a wired mouse when encountering lag, then try switching to a Bluetooth-enabled peripheral.
➡ Avoid clutter on your PC
Clutter is a general problem for all the components and the system. If youre running a lot of programs at the same time, the system will slow down and the response time for every activity will be affected.
So, if your mouse slows down, it can also be because your system is slow all together. Try to close some apps and processes and you wont have such problems.
We hate it when our mouse doesnt behave as it should, as this can have a wide range of impacts on our day-to-day workflow.
No matter if youre a gamer with state-of-the-art peripherals with RGB lighting or a user who simply wants to perform some tasks on your Windows 10 or Windows 11 PC, encountering mouse lag can be extremely annoying.
The solutions and suggestions we presented in this guide will certainly allow you to resolve the problem, and also prevent it from ever bothering you again.
For any other problems with your mouse, we also have a more in-depth article on how to fix mouse issues so make sure you check it out.
If you have any questions or, on the contrary, some useful solutions, drop them in the comments section below.
- Download this PC Repair Tool rated Great on TrustPilot.com (download starts on this page).
- Click Start Scan to find Windows issues that could be causing PC problems.
- Click Repair All to fix issues with Patented Technologies (Exclusive Discount for our readers).
Restoro has been downloaded by 0 readers this month.
10 lag windows bluetooth mouse
Is your Bluetooth mouse lagging, stuttering, or its movement jerky? Follow these steps to fix the Bluetooth mouse lag problem in Windows
One of the most significant advantages of a Bluetooth mouse is its wireless connectivity and incredible battery life. Not to mention, connecting a Bluetooth mouse to Windows 10 is easy. Once paired, you can start using it right away. Even though they are not as fast as the wired mice, especially for FPS games, a Bluetooth mouse is pretty good for regular day-to-day usage. Most people can’t tell the difference between wired and wireless mice when it comes to response times.
However, under certain circumstances, the Bluetooth mouse can become laggy with jerky mouse movement on the screen. The Bluetooth mouse pointer might even stutter and cause unwanted clicks. The lag problem is prevalent in the Logitech MX Master series and Razer Basilisk series Bluetooth mice.
Even though there is no concrete reason, more often than not, the Bluetooth mouse lag problem is caused due to interference with Wi-Fi, interference with home appliances like Microwave, conflicts with device drivers, or general mouse pointer settings.
No matter the reason, if your Bluetooth mouse is lagging, follow the below steps to fix it.
- Check Bluetooth mouse battery
- Update Bluetooth mouse driver
- Turn off pointer shadow
- Check Bluetooth audio devices
- Uninstall Realtek audio driver & software
- Disable Wi-Fi Bluetooth Collaboration
1. Check Bluetooth Mouse Battery
When a Bluetooth mouse is lagging, the first and foremost thing you should do is to check if the batteries are correctly inserted and have enough charge. When the batteries don’t have sufficient charge, the Bluetooth connection might be choppy and causes lag. This is especially true if you are using cheap batteries.
So, replace the batteries and make sure they are correctly connected on both ends with no wiggle room. If your Bluetooth mouse has an internal battery, recharge it fully. After that, connect the Bluetooth mouse and see if it fixes the lag issue.
2. Update Bluetooth Mouse Driver
More often than not, an outdated driver is a significant cause of the Bluetooth mouse lag problem. The problem is only compounded with the twice-a-year major Windows 10 updates. As such, it is crucial to make sure the Bluetooth driver is up to date. The good thing is, you can check and update the Bluetooth mouse driver directly from the Windows 10 Device Manager. Here is how.
Update Bluetooth mouse driver to fix mouse lag problem.
- Right-click on the Start menu.
- Select the “Device Manager” option.
- Expand the “Bluetooth” menu.
- Find the Bluetooth mouse device under “Bluetooth.”
- Right-click on the Bluetooth mouse device.
- Select the “Update driver” option.
- Click the “Search automatically for drivers” option.
- Windows will download and update the driver, if available.
- Close the Device Manager.
As an alternative, you can also check the manufacturer’s website for updated drivers. In general, you will find the latest possible drivers on the manufacturer’s website. This is because it takes some time for Microsoft to validate the driver it got from the manufacturer and add it to the Windows catalog of compatible drivers.
Doing a simple search like “<manufacturer name> <model number> driver” will take you to the relevant page where you can download the driver. Do remember to download the driver only from the manufacturer’s website. Please don’t download it from third-party sites. For example, I’m using a Logitech M Bluetooth mouse. So, I searched for “Logitech M driver” and downloaded the relevant driver from the Logitech website.
3. Turn off Mouse Pointer Shadow
For some Windows users, the mouse pointer shadow is causing significant lag issues with the Bluetooth mouse. In those cases, turning off the mouse pointer shadow will help solve the Bluetooth mouse lagging problem in Windows Here is how.
- Open the Settings app in Windows
- Click “Devices.”
- Select “Mouse” on the sidebar.
- Click on the “Additional mouse options” under “Related settings.”
- Go to the “Pointers” tab.
- Uncheck the “Enable pointer shadow” checkbox.
- Click “Ok.”
- Close the Settings app.
After disabling the mouse pointer shadow, restart the Windows 10 system, connect the Bluetooth mouse and see if the lag problem is fixed.
4. Check Bluetooth Audio Devices
If you are connected to multiple Bluetooth audio devices and switching between them, on some occasions, those devices can interfere with the Bluetooth mouse. This causes a temporary mouse lag problem. This is especially the case if the first Bluetooth audio device is not disconnected correctly after connecting to another audio device.
For example, I have two Bluetooth headsets connected to my laptop. I occasionally see the Bluetooth mouse pointer lagging and moving slow when switching from one to the other.
So, if you have multiple Bluetooth audio devices connected to the system or switching from one wireless audio device to the other, make sure to disconnect the other Bluetooth audio device manually and reconnect the Bluetooth mouse. Of course, you don’t have to do it that often. Only when you notice the mouse lag.
5. Uninstall Realtek Audio Software
According to some users, the Realtek audio driver and its companion software interfere with the Bluetooth mouse functionality and causing lag and mouse slowdown.
If you have Realtek HD Audio or Realtek 97 driver installed in your system, uninstalling it might fix the problem. You can uninstall the driver directly from the device manager. Here is how.
- Right-click on the Start menu.
- Select the “Device Manager” option.
- Expand the “Sound, video, and game controllers” menu.
- Right-click on the Realtek driver.
- Select the “Uninstall device” option.
- Click the “Uninstall” button in the confirmation window.
- Close the Device Manager.
- Restart Windows
After restarting, you should no longer see lag or slow mouse movement.
If you are wondering, after uninstalling the Realtek audio driver, Windows 10 will automatically install a generic audio driver if there are no alternatives. This makes sure that your audio devices work properly. If it doesn’t, you can always go to the Realtek website, download the appropriate driver, and install it manually.
6. Disable Wi-Fi Bluetooth Collaboration
If the problem is with your laptop or if your desktop computer has a Wi-Fi module, disabling the Wi-Fi Bluetooth Collaboration feature can help. Though the Wi-Fi Bluetooth collaboration feature is designed to reduce interference between Wi-Fi and Bluetooth signals, there is a chance that both signals are colliding and causing issues. In this case, the Bluetooth mouse will become laggy and stutter on the screen.
Follow these steps to disable Wi-Fi Bluetooth Collaboration to fix Bluetooth mouse lag.
- Press “Windows key + R” to open the Run dialog box.
- Type “ncpa.cpl” and press Enter.
- Double-click on your Wi-Fi network adapter.
- Click the “Properties” button.
- Click the “Configure” button under the Network tab.
- Go to the “Advanced” tab.
- Select “Wi-Fi Bluetooth Collaboration” under the “Property” section.
- Set its Value to “Disabled.”
- Click “Ok.”
- Close all windows and restart the system.
Note: If you cannot find the “Wi-Fi Bluetooth Collaboration” option, your Wi-Fi module doesn’t support this feature.
After restarting, your Bluetooth mouse should work normally. If you want to enable the Wi-Fi Bluetooth Collaboration feature, follow the same steps but select “Enabled” in step 8.
That is all. It is that simple to fix the Bluetooth mouse lag problem in Windows
I hope that helps.
If you are stuck or need some help, comment below, and I will try to help as much as possible.
Related: How to reinstall Bluetooth driver in Windows 10
Image credit: Aaron Yoo
Fix Bluetooth/Wireless Mouse Lag Issue on Windows 10
Dec. 09, / Updated by Bessie Shaw to Windows 10
Mouse lag or delay is one of the Windows 10 problems affecting computing experience after the upgrade or update, like Windows 10 Creators Update or Anniversary Update. Some Windows users encounter the mouse lag issue when they focus themselves on gaming or imaging with the Bluetooth mouse or wireless mouse. In this case, the mouse is stuck on lag, or stutter, or freeze, and you will not be able to continue your computer work.
Luckily, we've got solutions for you to get your Bluetooth/wireless mouse back on track. In this post, we'll go through the woes with some general but workable methods.
See Also:Fix Mouse/Keyboard Not Working after Windows 10 Update on Feb.
Top 5 Ways to Fix Bluetooth or Wireless Mouse Lag Problem on Windows 10
Note: Since your mouse is working improperly, it may take you minutes to hours to tackle the mouse lag issue on your Windows 10 laptop or desktop. It's recommended to use a touchpad if available.
Here's a small snip to get you started.
Way 1. Check the Mouse-related Hardware
1. Make sure the Bluetooth and the network connection is available.
2. Make sure there's no problem with your currently using mouse. You can try it on another PC to see if it could work properly. If so, problems may stay on the computer.
3. Try another Bluetooth or wireless mouse. If the mouse cursor/pointer problem still persists, then go to the methods below to troubleshoot the issue.
Way 2. Disable Realtek High Definition Audio Driver
Some users claim that Realtek High Definition Audio Driver and other audio drivers can sometimes cause these issue. If you’re using Realtek card you can try the following steps:
1. Go to Device Manager and locate Realtek High Definition Audio Driver.
2. Right click it and choose Disable.
Same thing might work for other audio drivers such as NVIDIA High Definition Audio, so try disabling them as well. If disabling audio drivers doesn’t help, you might want to uninstall them.
Way 3. Update Drivers to Fix the Windows 10 Bluetooth/Wireless Mouse Lag Issue
Several users reported that they fixed mouse lag issues simply by installing the official driver for their mouse. In most cases, Windows 10 will automatically install the default mouse driver, and while that driver usually works, sometimes certain issues can occur.If you’re using a branded mouse, check the manufacturer’s website and download the latest drivers for your mouse.
Incompatible or outdated drivers can cause severe mouse problems. Faulty Bluetooth driver may result in Bluetooth mouse not working issue; improper network driver may stop the n WLAN from connecting to the wireless mouse; outdated mouse driver may cause mouse not working problem and mouse lag issue. So it's important to keep the drivers update-to-date on your Windows 10 PC.Downloading drivers manually is a process that carries the risk of getting the wrong driver installed, which may lead to serious malfunctions.
Driver Talent is the leading professional driver download and update utility, and you can use it to download the best-matched Bluetooth, mouse, network, USB, etc. driver updates in just one-click.
Reviewed as the safest and fastest way to update drivers, the one-click solution offers the latest official and WHQL drivers for HP, Logitech, Asus, Razer, Dell, Toshiba, Microsoft, Lenovo, Alienware, etc. You can get the driver update downloads directly with the button below:
Here's how to one-click download driver update for Windows 10 and troubleshoot the mouse lag issue:
1. Launch Driver Talent and click the Scan button to enable the faulty drive detecting on Windows
2. Click the Update button to download and install the best-matched mouse, Bluetooth, network or USB driver updates. Or use the Repair to fix the mouse lag issue directly.
3. Perform a restart of the computer to make the driver changes take effect on Windows
Note: Create a system restore point and backup the drivers before you make system changes on the OS. This will help to restore the system and the drivers once your computer runs into some other severe problems.
Way 4. Change Improper Bluetooth or Wireless Settings that Causes the Mouse Lag
Incorrectly configured Bluetooth or network can result in the mouse pointer moving slowly issue on your Windows So it's necessary to check and change the related settings so that you have access to your Bluetooth mouse or wireless mouse.
Step 1. Enable Bluetooth Devices to Find the PC
1. Right-click the Bluetooth icon on the taskbar.
2. Select the Open Settings.
3. On the right pane, scroll down and click the More Bluetooth options.
4. Check the Allow Bluetooth devices to find this PC.
5. Click the Apply and the OK.
Step 2. Disable the Power Management
1. Use Windows shortcut keysWin + X.
2. Select the Device Manager.
3. Expand the Bluetooth entry.
4. Double-click each Bluetooth item to open the Properties box.
5. Go to the Power Management tab.
6. Uncheck the Allow the computer to turn off this device to save power option.
7. Click the OK.
8. Expand the Network adapters entry.
9. Double-click each network device to open the Properties box.
Go to the Power Management tab.
Uncheck the Allow the computer to turn off this device to save power option.
Click the OK.
Also, do the same steps to the "Mice and other pointing devices" and the "Universal Serial Bus Controllers". This will stop the mouse lag on Windows
Way 5. Enable / Disable Scroll Inactive Windows
1. Navigate to Settings > Devices >Mouse.
2. Now locate the Scroll Inactive Windows option and disable / enable it.
3. Try disabling and enabling this option a few times and check if the issue is resolved.
See Also:Fix Mouse Cursor Disappears after Windows 10 Creators Update
Hope your mouse pointer can work smoothly after the fixes. If the above tips are still not working on the Bluetooth or wireless mouse lag problem, you can comment below or click the LEFT MENU on this page for more help. Any other Windows related questions please see Windows 10 section on this site.
Other Mouse-related Issues and Solutions:
You will also be interested:
- Western digital firmware update tool
- Land for sale manahawkin nj
- Icd 10 migraine headache
- Go pro 7 sim card
- Home workout plan pamela reif
- White led tv stand
- Shooting range tucson az
- 2 piece vanity set
- Second chance sheltering network
- Wolfdog for adoption near me
- 4x4 rubiks cube solver
I also have mouse cursor/pointer lag/latency using a Logitech M Bluetooth mouse.
I have a Dell Vostro laptop.
This lag seems to still occur even when I turn off my Bluetooth keyboard and Bluetooth speaker.
I seem to get the terrible mouse pointer lag only when I'm browsing the Internet. So I don't think it would be interference, since I would think interference would cause the same mouse pointer lag when I'm not browsing the Internet.
Anyone else have any ideas on why my computer seems to only give mouse pointer lag just when I'm browsing the Internet?
I do have a Meg up and down FIOS connection. So I don't think it's a slow Internet connection.
Was this reply helpful?
Sorry this didn't help.
Great! Thanks for your feedback.
How satisfied are you with this reply?
Thanks for your feedback, it helps us improve the site.
How satisfied are you with this reply?
Thanks for your feedback.