Weigh safe universal tow ball

Weigh safe universal tow ball DEFAULT

 

universal tow ball

The Weigh Safe Universal Tow Ball is our hitch ball that measures tongue weight and can be attached to any platform that is ¾” thick. This tow ball has an easy-to-use, built-in scale that measures your trailer’s tongue weight every time you tow and it’s stainless steel construction resists rust and corrosion. This tow ball comes in the following three sizes and has a max GTW as follows:

 

universal tow ball

We have three different versions of the Universal Tow Ball. Our WSUN-1 is the Universal Tow Ball that comes with a 2” tow ball and a clam shell tow ball converter. The WSUN-2 is the Universal Tow Ball that comes with a 2” tow ball and no clam shell and our WSUN-3 is the Universal Tow Ball with a 2 5/16” ball. Each of which are made from high corrosion resistant and heated treated stainless steel components.

This ball MUST be attached to a ¾” thick platform, no more or less. The reason being is that there is a rod inside the tow ball shaft that presses down on an internal plunger when pressure is applied to the ball. If the platform is not exactly ¾” thick, the gauge will not read how it is supposed to. Also, the mounting hole on the platform must not exceed the ball threaded shank diameter (1” thick) by more than 1/16”. This is one of the most common questions about the Universal Tow Ball so it’s super important to double check that your platform is ¾ “ thick!

Installing The Universal Tow Ball

To install the Universal Tow Ball onto a platform:

  1. Insert the platform into the receiver sideways to make it easier to tighten the tow ball onto the platform.
  2. Then, insert the 2” hitch ball main shaft into the ball mount and attach the lock washer.
  3. Once the lock washer is in place, fasten the gauge housing as tightly as you can with your hands.
  4. Take 2 &#; 1 ½ “ wrenches and tighten the nuts to pounds foot torque.
  5. Make sure that the gauge runs perpendicular to the ball mount so the gauge is in a readable position.
  6. Reinsert the platform in the upright position and lock in place with a hitch locking pin.
  7. Use a 3/16” hex wrench and tighten the ball set screw until the gauge reads pounds. After pounds has been reached, back out the set screw until the gauge has stopped decreasing.

Prior to tightening the ball set screw, notice how much slop is in the ball. If you tighten the set screw and then back it off correctly, the ball does not have any slop but is still able to swivel. If you tighten the ball set screw too much, the ball will not be able to swivel and could increase wear and tear on the ball. This demonstration is shown in the video below.

universal tow ball installation

If you purchase the WSUN-1, you can use the Clam Shell for quick conversion from a 2” hitch ball to a 2 5/16” hitch ball. All you have to do is place the Clam Shell converter on top of and over the 2” ball and close tightly. This Clam Shell comes in combination with the WSUN-1 but can also be purchased separately. It is important to not leave the Clam Shell inserted on the 2” hitch ball when not towing. The Clam Shell should fit snug while it swivels to reduce corrosion and wear and tear.

Also it is important to note that although the Clam Shell converts the 2” tow ball to a 2 5/16” tow ball, the ball is still rated at the 2” hitch ball weight rating. Using the Clam Shell does not increase the amount of weight you can tow. So, the 2” tow ball with the Clam Shell converter, rates at a GTW of 10, pounds.

As always, make sure that your tongue weight is within ” of your GTW. If the scale indicates that your tongue weight is too low or too high, you can adjust it before you head out so that you can complete your journey with peace of mind, knowing that your setup is safe.

Here is a video of the Universal Tow Ball and how to install it:

 

Sours: https://www.weigh-safe.com/towing-safety/the-universal-tow-ball/

Weigh Safe Universal Tow Ball

Ensures Proper Towing and Improves Performance

This Weigh Safe hitch ball has an easy-to-use, built-in scale that measures your trailer&#;s tongue weight every time you tow. If the scale indicates that your tongue weight is too low or too high, you can adjust it before you head out so that you can complete your journey with peace of mind, knowing that your setup is safe. And towing trailers with different coupler sizes is a breeze thanks to the magnetic, clamp-on /16&#; ball adapter. Stainless steel construction resists rust and corrosion.

Pressure on the ball sends a reading to the built-in scale that measures tongue weight (lbs.)

GMC guidelines for proper towing states tongue weight should be no less than 10 percent of gross trailer weight (GTW) and no more than 15 percent. For example, tongue weight for a 10, pound trailer should be no less than lbs. and no more than lbs.

(Note: Weigh Safe max tongue weight is lbs. Do not initiate tow if your reading is in the red zone)

How Tongue Weight Affects Your Vehicle

The tongue weight is the static force the trailer tongue exerts on the hitch/tow ball. Proper trailer tongue weight improves the vehicle and trailer towing experience by improving performance. Not enough tongue weight or force on the hitch/tow ball causes an increase in trailer sway from side to side, making it difficult to control. Conversely, too much tongue weight or force on the hitch/tow ball could overload the rear tires of the towing vehicle, pushing the rear end of the vehicle around. This could also negatively affect the vehicle handling. Performance is impaired as you might not be able to go around corners and curves properly, and your vehicle may not stop quickly enough when you press the brake pedal.

The Weigh Safe Drop Hitch effectively measures the tongue weight of your towing load, improving the vehicle tow load balance and performance.

  • Hitch ball provides connection point for your trailer&#;s coupler
  • Tongue weight scale built into the hitch ball helps you balance your trailer
    • Promotes safe towing &#; lets you know if your load needs to be adjusted before you tow
    • Simple operation &#; automatically provides a measurement every time you couple your trailer
    • Efficient and hassle-free &#; eliminates the need for separate or commercial scales
  • Designed and tested to let you tow trailers with different coupler sizes
    • Works with 2&#; and /16&#; couplers
    • Ball adapter piece clamps on for quick and easy use
  • Stainless steel construction is corrosion resistant
    • Shank is heat treated for superior strength and dependability
  • SAE J certified and VESC Regulations V-5 compliant
  • Made in the USA

Features
Built-in Scale
Ball Diameter
2”(w/ Clam Shell), 2” or 2 5/16”
Weight Capacity
10, lbs
Max Tongue
1, lbs
Shank Diameter
1&#;
V5 &#; J certified
Ball Mount Platform
3/4&#; thick platform ONLY
Overall Height
2” ball: 5 7/8
2 5/16” ball: 6”
Scale Dimensions
3″ long x 2″ wide x /4″ high
*Scale sits below the ball mount platform when installed
Weight (not including platform)
5 lbs
Compatible with Clam Shell
Sours: https://www.weigh-safe.com/product/universal-tow-ball/
  1. Invesco solar etf stock
  2. Who owns fox news corp
  3. Anytime fitness river falls wi
  4. Nfs heat crews to join
  5. Day care in brentwood ny

SKU #: WSF-WSUN-1 Weigh Safe Universal Tow Ball

Knowing the tongue weight of your trailer is critical in your ability to tow safely. Further, being able to adjust the load on your trailer to optimize your tongue weight is even more important. In the past, this was a daunting process, but with the Weigh Safe Tow Ball, you can easily accomplish this.

This Weigh Safe hitch ball has an easy-to-use, built-in scale that measures your trailer's tongue weight every time you tow. If the scale indicates that your tongue weight is too low or too high, you can adjust it before you head out so that you can complete your journey with peace of mind, knowing that your setup is safe. And towing trailers with different coupler sizes is a breeze thanks to the magnetic, clamp-on /16" ball adapter. Stainless steel construction resists rust and corrosion.

IMPORTANT NOTE:
  • The Weigh Safe hitch ball is designed for use with ball mounts that have a platform thickness of 3/4" only.

Pressure on the ball sends a reading to the built-in scale that measures tongue weight (lbs.)

GMC guidelines for proper towing states tongue weight should be no less than 10 percent of gross trailer weight (GTW) and no more than 15 percent. For example, tongue weight for a 10, pound trailer should be no less than lbs. and no more than lbs.

(Note: Weigh Safe max tongue weight is lbs. Do not initiate tow if your reading is in the red zone)

WHAT IS TONGUE WEIGHT AND WHY IS IT IMPORTANT?
Tongue weight (TW) refers to the weight that the fully loaded trailer exerts downward on the hitch ball of the tow vehicle. Tongue weight is typically 10 percent - and should not exceed 15 percent - of your gross trailer weight. For example, a 10,lb trailer should have a tongue weight between 1, lbs and 1, lbs. You can adjust the tongue weight of your trailer by removing or adding cargo, or redistributing the load on the trailer. The tongue weight should not exceed the capacity of your tow vehicle, your hitch, or any of your towing components.

Simply put, too little tongue weight can cause trailer sway and too much tongue weight can cause the tow vehicle to perform poorly. You may have difficulty steering, gaining traction, or braking when driving a setup that has too much weight pushing down on the rear of the vehicle. Ultimately, towing with an improper tongue weight can cause you to lose control of your vehicle or cause your trailer to separate from the vehicle.

Specifications

  • SkuWSF-WSUN-1
  • ManufacturerWeigh Safe
  • MPNWSUN-1
FEATURES:
  • Hitch ball provides connection point for your trailer's coupler
  • Tongue weight scale built into the hitch ball helps you balance your trailer
    • Promotes safe towing - lets you know if your load needs to be adjusted before you tow
    • Simple operation - automatically provides a measurement every time you couple your trailer
    • Efficient and hassle-free - eliminates the need for separate or commercial scales
  • Designed and tested to let you tow trailers with different coupler sizes
    • Works with 2" and /16" couplers
    • Ball adapter piece clamps on for quick and easy use
  • Stainless steel construction is corrosion resistant
    • Shank is heat treated for superior strength and dependability
  • SAE J certified and VESC Regulations V-5 compliant
  • Made in the USA
SPECIFICATIONS:
  • Ball diameter: 2"
    • /16" Diameter with included adapter
  • Weight capacity: 10, lbs
  • Tongue weight capacity: 1, lbs
  • Shank diameter: 1"
  • Fits ball mount platforms that are 3/4" thick
  • Overall height:
    • 2" Ball: /8"
    • /16" Ball: 6"
  • Scale dimensions: 3" long x 2" wide x /4" high
    • Scale sits below the ball mount platform when installed
Sours: https://www.dieselpowerproducts.com/mm5/
I Unbox The New Gen-Y Rebel X Hitch: Here's What You Get For The Money!

However, this does not bother me very much, especially since I have quite enough free time and energy to have sex for real. Having transformed many different lovers from different social groups, I realized that slightly impoverished intellectuals are the best thing that this crazy city can give. They are rather depraved, sophisticated by the soul, and, as a rule, if they manage to be enraged, they reach any kind of immorality in bed.

These two are definitely one of them.

Ball tow weigh universal safe

When can we do this again. I think not until after lunch. We are both like lemons, Suzie. It's a shame my neck can't stretch like a giraffe.

AMAZING INNOVATION! Weigh Safe towbar/ball weight scale

Fuck-fuck-fuck. And when I already began to think about whether it was time to stop all this, two members began to contract, pumping me with sperm in both holes. My mind was darkened by the effect of a triple orgasm in which our bodies were beating. When reality began to seep a little through the euphoria, I found myself lying on the lap of the guys.

Vasily supported my head, and Evgeny stroked his chest, trying not to get his hand dirty in the semen that covered most of the body.

You will also be interested:

As a result, Lenka sat with her back to most of the crowd and facing me, leaving me to contemplate her. Almost without a skirt. But Lenka's embarrassment did not last long, as soon as the second bottle of beer hit her fucking head, she had already forgotten about modesty and gladly substituted the. Sun and the gaze of everyone who wanted her feet inside and out.



3180 3181 3182 3183 3184