5 gallon clear floor epoxy

5 gallon clear floor epoxy DEFAULT

Gallon Epoxy

Solid Color Epoxy 1,, Sq Ft Complete System

 * Take the guess work out of trying to figure out what products you need for your Solid Color epoxy project and let us do it for you. We now offer complete systems based on your square footage needs. All you need to do is pick the colors and finish choices* System coverage is 1,, square feet at the optimum suggested application thickness* The system includes the following products:* Gallons of High Performance % Solids Resin-Based Epoxy Coating* 4-Gallons of either our EPOXYARMOR High Performance Clear Top Coat or EPOXYARMOR High Performance Satin Top Coat which is a two-component, high gloss or satin finish low V.O.C. The Gray colors preblend was carefully chosen to complement the Battleship Gray, French Gray, Light Gray and Dark Gray epoxy colors beautifully for a polished and eye-catching look, which includes a rich Powder Blue, Black and White combination. The Tan color preblend includes a rich Autumn Brown, Black and White combination.* PLEASE NOTE: You may select 1 fleck color per blend or you may select up to 3 fleck colors per blend* PLEASE NOTE: Custom blended Decorative Fleck cannot be returned once the order is placed and due to the many variables with computer monitor settings, the sample colors shown below may not be accurate and should only be used as a reference      ..

$2,

Sours: https://epoxymaster.com/Gallon-Epoxy/

Premium Clear Floor Epoxy % Solids Low Viscosity Option DK ™

Clear Floor Epoxy % Solids Standard - Premium and Low Viscosity Option Dura-Kote by SureCrete


Clear % Epoxy for Floors DK by SureCrete

Clear % Epoxy for Floors DK by SureCrete


Dura-Kote DK is a clear floor epoxy % solids that are available in a standard, premium, and a thin viscosity option with zero VOC's. SureCrete's epoxy coatings floor systems can be used in a wide variety of applications such as high build clear coat for a host of decorative concrete systems, a primer coat and binder coat for Dura-Kote Flakes and Metallics. Yellowing and blush are minimized by the use of an aliphatic amine curing agent for part B, providing a premium, durable clear coating for colored or stained concrete and cement-based overlays. For unique, job specific conditions two other specialized part B’s are available, Premium UV and Premium PTV. See your SureCrete distributor for details. The high performance, self-leveling characteristics generate the premier balance of strength, flexibility, and chemical resistance that is both user-friendly and extremely durable. Dura-Kote Epoxy is ideally suited for any commercial or residential setting: manufacturing facilities, warehouses, bars, clubs, retail stores, automotive showrooms, residential interiors, garage floors, gyms, locker rooms, stadiums, or anywhere that an exceedingly resilient floor is desired.

Epoxies have been in use for a very long time in the concrete coating industry, and for a good reason - they are an excellent carrier for pigments, metallic pearls, and multi-color flake chips. They also have the fairly unique property of being able to bridge small cracks and voids so that the applicator may be able to forgo some patchwork that would be necessary to do before other concrete coating applications. These qualities have made % epoxy coating garage floor a go-to choice for professional decorative concrete contractors and DIY homeowners alike. The thick millage build-up provided by Epoxy provides a beautiful sacrificial layer for abrasion resistance that will last quite a bit longer than other, thinner coatings with lower solids contents. In addition to these beneficial properties, Dura-Kote Epoxy is also very ecologically friendly at completely zero grams per liter VOC content and therefore is quite often used on green architectural projects by contractors looking to earn LEED points on the concrete coating and protective sealer portion of the job.


Premium Clear Floor Epoxy % Solids Typical applications:

  • Retail and Commercial Flooring
  • Garage Floors and Showrooms
  • Interior Residential Living Spaces
  • Sacrificial Floor Coatings
  • Epoxy Garage Floor
  • Inside Floor Paint
  • Hotel and Resort Reception Areas
  • High-Traffic Interior Applications
  • Fast Turn-Around Projects
  • Thick Millage Hangar Floors
  • Most Concrete Floors
  • Epoxy Garage Floors
  • Coatings Garage Floor

Frequently Asked Questions About Dura-Kote Clear Concrete Floor Epoxy

Question: Can I use just one coat of Dura-Kote Floor Epoxy ?

Answer: Yes, you can! Although it will depend entirely upon your desired finished floor and the amount of protection you need, Epoxy was designed specifically for this purpose!

Question: Will Dura-Kote Epoxy self-level and fill small holes?

Answer: Yes, it certainly will! However, be sure not to try to bridge expansion joints as these are necessary to allow movement in the concrete.

Question: Can Epoxy be used outside?

Answer: No, epoxy coatings are not vapor-permeable and therefore should not be utilized in exterior applications.

Question: I have strict VOC laws in my area, can I use DK Epoxy ?

Answer: Without question, yes! At zero grams per Liter of VOC content, Epoxy can be used no matter how strict local VOC laws are!

Question: If I’m putting down the second coat of Epoxy , does it have to be screened?

Answer: Yes, because of its chemical nature and high solids content, the second coat will not bond correctly without proper screening of first coat.


Specifications and Properties of Floor Epoxy % Solids

Coverage  square foot per gallon per coat catalyzed product (varies widely based on application method)
VOC Rating  0 g/L
Solids Content  %
Shelf Life  1 year in original unopened container
Mixing Ratio  2 parts A to 1 part B
Pot Life  minutes
Ready for recoat  hours (18+ hours at low temperatures)
Light Duty Use  Approx 16 hours (Up to 30 hours at low temperatures)
Heavy Traffic Ready  Approx 24 hours (Up to 3 days at low temperatures)
Full Cure  days (Up to 14 days at low temperatures)
Appearance (cured)  High gloss sheen
Appearance (wet)  Clear – Straw Color
Water Resistance  Excellent beads water
Mechanical Stability  Excellent
Light Stability  Yellows
Odor  Sweet
Adhesion    PSI (concrete failure)
Abrasion Resistance (Tabor)  1, gm. load @ cycles = 31 mg loss
Compressive Strength  9, PSI
Application Temperature  50 – 90 degrees Fahrenheit

Chemical Resistance for Dura-Kote Epoxy

MEK  not recommended
Xylene  8 hours splash spill
Gasoline  2 hours splash spill
Butanol  8 hours splash spill
Methanol  not recommended
Ethyl Alcohol  8 hours splash spill
Skydrol  2 hours splash spill
10% Sodium Hydroxide  long term immersion
50% Sodium Hydroxide  2 hour immersion
Acetic Acid 5%  2 hours splash spill
10% Sulfuric Acid  8 hours splash spill
70% Sulfuric Acid  not recommended
10% Hydrochloric Acid  8 hours splash spill
20% Nitric Acid  not recommended
Ethylene Glycol  8 hours splash spill
Economy 3 Gallon Kits Clear Floor Epoxy % Solids DK E™ by SureCrete

Economy 3 Gallon Kit Clear Floor Epoxy % Solids DK E™ by SureCrete 3-Gallon Kit – % Solids “Economy” High Gloss/Thick Build Epoxy Clear Coat DK E SKU: | UPC: Also Available: Gallon Kit – % Solids “Economy” High Gloss/Thick Build Epoxy Clear Coat DK E SKU: | UPC:

Premium 3 Gallon Kit Clear Floor Epoxy % Solids DK P™ by SureCrete

Premium 3 Gallon Kit Clear Floor Epoxy % Solids DK P™ by SureCrete 3-Gallon Kit – % Solids “Premium” High Gloss/Thick Build Epoxy Clear Coat DK P SKU: | UPC: Also Availbe: Gallon Kit – % Solids “Premium” High Gloss/Thick Build Epoxy Clear Coat DK P SKU: | UPC:

Premium Thin Viscosity 3 Gallon Kit Clear Floor Epoxy % Solids Low DK PTV™ by SureCrete

Premium Thin Viscosity 3 Gallon Kit Clear Floor Epoxy % Solids Low DK PTV™ by SureCrete 3-Gallon Kit – % Solids Premium Thin Viscosity” Epoxy Clear Coat DK PTV SKU: | UPC: Also Avalible: Gallon Kit – % Solids Premium Thin Viscosity” Epoxy Clear Coat DK PTV SKU: | UPC:

Part “A” and Part “B” SKU’s and UPC’s To Make Above Kits
DK Part “A” 3 Gallon – % Solids Epoxy Clear Coat (requires Part B) SKU: | UPC:
DK Part “A” 15 Gallon – % Solids Epoxy Clear Coat (requires Part B) SKU: | UPC:
DK E Part “B” 1 Gallon – Economy Curing Agent for DK & ColorTec 3 Gal. SKU: | UPC:
DK P Part “B” 1 Gallon – Premium Curing Agent for DK & ColorTec 3 Gal. SKU: | UPC:
DK PTV Part “B” 1 Gallon – Premium Thin Viscosity Curing Agent for DK & ColorTec 3 Gal. SKU: | UPC:
DK E Part “B” 5 Gallon – Economy Curing Agent for DK & ColorTec 15 Gal. Gal. SKU: | UPC:
DK P Part “B” 5 Gallon – Premium Curing Agent for DDK & ColorTec 15 Gal. SKU: | UPC:
DK PTV Part “B” 5 Gallon – Premium Thin Viscosity Curing Agent for DK & ColorTec 15 Gal. SKU: | UPC:

Sours: https://surecretedesign.com/product/clear-floor-epoxy/
  1. Local live tv streaming services
  2. Idol of the raven goddess
  3. Where are neora products made
  4. Paint and sip vancouver wa
  5. Knee cyst icd 10

Epoxy Superstore Contractor Center

CALL: ()

CALL: ()

% SOLIDS EPOXY • NORKLAD • HIGH SOLIDS FLOOR COATING • CLEAR RESIN

% Solids Epoxy

We sell % solids epoxy in both colored and clear. This is a product guide to help you decide which epoxy is best for you. If you are ready to purchase, head to our webstore.

TO WEBSTORE

% solids epoxy does not have water or solvents that evaporate while curing; it retains % of its thickness and body after cure. This gives it the name '% solids.' There are no harmful organic vapors (VOCs) like you experience with urethane application. Best of all, they are abrasian resistant, chemical resistant, stain resistant, and all-around the most durable floor coating there is, by far. A properly installed % solids floor will last for 20 years or more.

However, % solids epoxy has an extremely short potlife and cure time of only 30 minutes. It must be applied quickly and skillfully with a notched squeegee by a professional or there is a high likelihod that it will cure faster than it can be applied. Some of our DIY customers have had great success by carefully researching and buying the proper tools, but know that if you have never installed a % epoxy floor before, you are taking a risk by doing so. This drawback of % solids epoxy can also be a positive; many professionals appreciate the fast potlife of % solids because it makes jobs faster and more efficient.



% solids epoxy is the only epoxy that can be used for metallic epoxy floors (pictured above). The base coat must be % solids because its self leveling properties allow the pigments to blend together and settle evenly. If you are interested in a this kind of finish, check out our metallic epoxy floor kit page that includes complete kits and application instructions.

We sell many types of % solids epoxy. If you are looking for a basic clear coat, look no further than Norklad M. If you are looking for a UV resistant clear coat, upgrade to Norklad UV. If you are looking for colored epoxy, check out Norklad , which is available in 12 different colors.

Norklad M | % Solids Epoxy | Clear Coat

Norklad M | % Solids Epoxy | Clear Coat

SIZES:
• Gallon (+ sq/ft)
• Gallon (+ sq/ft)
• 3 Gallon (+ sq/ft)

Norklad M is a two component % solids epoxy broadcast coat that can be filled with decorative chips and colored sand mixtures to provide an infinite array of color schemes or patterns. It is % solids therefore has low odor, no flammability, and is self-leveling. When applied at sq/ft per gallon, Norklad M will self-level to a glasslike surface.

When to use Norklad M: % solids is recommended for warehouses, kitchens, restrooms, and other areas where either a high build clear product is needed or where a decorative filled floor is desired. Ideal for full broadcast terrazzo or colorchip floors. % solids is the industry standard for high-end commercial epoxy flooring.

SOLIDS BY WEIGHT: %
SOLIDS BY VOLUME: %
VOLATILE ORGANIC CONTENT: Zero pounds per gallon
COLOR: Clear
RECOMMENDED FILM THICKNESS: mils
COVERAGE PER GALLON: square feet per gallon @ mils MIX RATIO: pounds part A ( gallons) to pounds part B ( gallons) (volumes approx.)
FINISH CHARACTERISTICS: Gloss (60 to 90 @ 60 degrees @ Erichsen glossmeter)
ABRASION RESISTANCE: Taber abraser CS calibrase wheel with gram total load and cycles = 36 mg loss
FLEXURAL STRENGTH: 7, psi @ ASTM D
COMPRESSIVE STRENGTH: 11, psi @ ASTM D
ADHESION: psi @ elcometer (concrete failure, no delamination)
VISCOSITY: Mixed = cps (typical)
TENSILE STRENGTH: 7, psi @ ASTM D
ULTIMATE ELONGATION: %
GARDNER VARIABLE IMPACTOR: 50 inch pounds direct – passed
HARDNESS: Shore D = 81
APPLICATION TEMPERATURE: degrees

CURE SCHEDULE:
Pot life - 1 1/2 gallon volume: minutes @ 70 degrees F
Tack free (dry to touch): hours @ 70 degrees F
Recoat or topcoat: hours @ 70 degrees F
Light foot traffic: hours @ 70 degrees F
Full cure (heavy traffic): days @ 70 degrees F

TOPCOAT: Urethane topcoat is recommended for added UV-Resistance if exposed to sunlight. Norklad can easily coat over any solvent or water based epoxies. If used alone, it is recommended that a primer coat be used to prevent outgassing/blistering. *For best results, apply with a ¼” nap roller and/or squeegee

SURFACE PREPARATION: The most suitable surface preparation would be a fine brush blast (shot blast or diamond grind) to remove all laitance and provide a suitable profile. All dirt, foreign contaminants, oil and laitance must be removed to assure a trouble free bond to the substrate. A test should be made to determine that the concrete is dry; this can be done by placing a 4'x4' plastic sheet on the substrate and taping down the edges. If after 24 hours, the substrate is still dry below the plastic sheet, then the substrate is dry enough to start coating. The plastic sheet testing is also a good method to determine if any hydrostatic pressure problems exist that may later cause disbonding. Apply your base coat and colorchips and allow to sufficiently cure. (wait until you can no longer leave an imprint of your finger in the coating.)

PRODUCT MIXING: This product has a mix ratio of # part A to # part B. Standard packages are packaged in gal kits. (1 gal of part a (resin) and half gallon of part b (hardener). They are in pre-measured kits and should be mixed as supplied in the kit. We highly recommend that the kits not be broken down unless suitable weighing equipment is available. After the two parts are combined, mix well with slow speed mixing equipment such as a jiffy mixer until the material is thoroughly mixed and streak free. After mixing, transfer the mixed material to another pail (the transfer pail) and again remix. The material in the transfer pail is now ready to be applied onto your base coat. Improper mixing may result in product failure.

PRODUCT APPLICATION: The mixed material can be applied by brush, roller or a serrated squeegee and then back rolled as long as the appropriate thickness recommendations are maintained. Then broadcast aggregate into the coating while wet. Maintain temperatures and relative humidity within the recommended ranges during the application and curing process. If concrete conditions or over aggressive mixing causes air entrapment, then an air release roller tool should be used prior to the coating tacking off. This product can be used with random chip broadcasts, full chip broadcasts, or colored quartz.

RECOAT OR TOPCOATING: If you opt to recoat or topcoat this product, you must first be sure that the coating has tacked off before recoating. Always remember that colder temperatures will require more cure time for the product before recoating or topcoating can commence. Before recoating or topcoating, check the coating to insure no epoxy blushes were developed (a whitish, greasy film or deglossing). If a blush is present, it must be removed prior to topcoating or recoating. We recommend topcoating with a urethane product to assist in UV-resistance.

CLEANUP: Use xylol xylene.


Norklad UV | % Solids Epoxy | UV Resistant Clear Coat

Norklad UV | % Solids Epoxy | UV Resistant Clear Coat

Norklad UV has additional UV inhibitors to slow down ambering in the presence of UV light.

Norklad UV is a two component % solids epoxy broadcast coat that can be filled with decorative chips and colored sand mixtures to provide an infinite array of color schemes or patterns. It is % solids therefore has low odor, no flammability, and is self-leveling. When applied at sq/ft per gallon, Norklad UV will self-level to a glasslike surface.   

When to use Norklad UV: % solids is recommended for warehouses, kitchens, restrooms, and other areas where either a high build clear product is needed or where a decorative filled floor is desired. Ideal for full broadcast terrazzo or colorchip floors. % solids is the industry standard for high-end commercial epoxy flooring.

SOLIDS BY WEIGHT: %
SOLIDS BY VOLUME: %
VOLATILE ORGANIC CONTENT: Zero pounds per gallon
COLOR: Clear
RECOMMENDED FILM THICKNESS: mils
COVERAGE PER GALLON: square feet per gallon @ mils
PACKAGING INFORMATION gallon kits ( gallons net approximately)
MIX RATIO: pounds part A ( gallons) to pounds part B ( gallons) (volumes approx.)
FINISH CHARACTERISTICS: Gloss (60 to 90 @ 60 degrees @ Erichsen glossmeter)
ABRASION RESISTANCE: Taber abraser CS calibrase wheel with gram total load and cycles = 36 mg loss
FLEXURAL STRENGTH: 7, psi @ ASTM D
COMPRESSIVE STRENGTH: 11, psi @ ASTM D
ADHESION: psi @ elcometer (concrete failure, no delamination)
VISCOSITY: Mixed = cps (typical)
TENSILE STRENGTH: 7, psi @ ASTM D
ULTIMATE ELONGATION: %
GARDNER VARIABLE IMPACTOR: 50 inch pounds direct – passed
HARDNESS: Shore D = 81
APPLICATION TEMPERATURE: degrees F

CURE SCHEDULE:

pot life – 1 1/2 gallon volume ……..…… minutes @ 70° F
tack free (dry to touch)……………………..… hours @ 70° F
recoat or topcoat…………….………… hours @ 70°F
light foot traffic…………………………..…… hours @ 70°F
full cure (heavy traffic) ………..…………… days @ 70°F

CHEMICAL RESISTANCE:
REAGENT                                                                           RATING
butanol                                                                                  C
xylene                                                                                     C
1, 1, 1 trichloroethane                                                         B
MEK                                                                                        A
methanol                                                                               A
ethyl alcohol                                                                         C
skydrol                                                                                   B
10% sodium hydroxide                                                      E
50% sodium hydroxide                                                      D
10% sulfuric acid                                                                 C
70% sulfuric acid                                                                 A
10% HC1 (aq)                                                                      C
5% acetic acid                                                                      B

Rating key: A - not recommended, B - 2 hour term splash spill, C - 8 hour term splash spill, D - 72 hour immersion, E - long term immersion. NOTE: extensive chemical resistance information is available through your sales representative.

TOPCOAT: Urethane topcoat is recommended for added UV-Resistance if exposed to sunlight. Norklad M can easily coat over any solvent or waterborne epoxies. If used alone, it is recommended that a primer coat be used to prevent outgassing/blistering. *For best results, apply with a ¼” nap roller and/or squeegee.

SURFACE PREPARATION: The most suitable surface preparation would be a fine brush blast (shot blast or diamond grind) to remove all laitance and provide a suitable profile. All dirt, foreign contaminants, oil and laitance must be removed to assure a trouble free bond to the substrate. A test should be made to determine that the concrete is dry; this can be done by placing a 4'x4' plastic sheet on the substrate and taping down the edges. If after 24 hours, the substrate is still dry below the plastic sheet, then the substrate is dry enough to start coating. The plastic sheet testing is also a good method to determine if any hydrostatic pressure problems exist that may later cause disbonding. Apply your basecoat and colorchips and allow to sufficiently cure. (wait until you can no longer leave an imprint of your finger in the coating. i.

 PRODUCT MIXING: This product has a mix ratio of # part A to # part B. Standard packages are packaged in gal kits. (1 gal of part a (resin) and half gallon of part b (hardener). They are in pre-measured kits and should be mixed as supplied in the kit. We highly recommend that the kits not be broken down unless suitable weighing equipment is available. After the two parts are combined, mix well with slow speed mixing equipment such as a jiffy mixer until the material is thoroughly mixed and streak free. After mixing, transfer the mixed material to another pail (the transfer pail) and again remix. The material in the transfer pail is now ready to be applied onto your basecoat. Improper mixing may result in product failure.

 PRODUCT APPLICATION: The mixed material can be applied by brush, roller or a serrated squeegee and then back rolled as long as the appropriate thickness recommendations are maintained. Then broadcast aggregate into the coating while wet. Maintain temperatures and relative humidity within the recommended ranges during the application and curing process. If concrete conditions or over aggressive mixing causes air entrapment, then an air release roller tool should be used prior to the coating tacking off. This product can be used with random chip broadcasts, full chip broadcasts, or colored quartz.

 RECOAT OR TOPCOATING: If you opt to recoat or topcoat this product, you must first be sure that the coating has tacked off before recoating. Always remember that colder temperatures will require more cure time for the product before recoating or topcoating can commence. Before recoating or topcoating, check the coating to insure no epoxy blushes were developed (a whitish, greasy film or deglossing). If a blush is present, it must be removed prior to topcoating or recoating. We recommend topcoating with a urethane product to assist in UV-resistance.

 CLEANUP: Use xylol  xylene.

VIEW IN OUR STORE

Norklad | % Solids Epoxy | Colored Base Coat

Norklad | % Solids Epoxy | Colored Base Coat

Norklad is a two component % solids epoxy colored coating designed for applications where a high build colorfast impact resistant floor is needed. It can be used as durable color coat for for maximum durability or as a colored base coat for color chip broadcasts. % solids epoxy is considered the industry standard for high-end flooring due to the fact that it is 4x stronger than concrete and has no voc, no flammability and can be applied as thick or thin as you need it.

It's recommend to squeegee this product out and apply sq/ft per gallon (approx mils) and back roll it with a shed-resistant roller to even it out. It has a very fast pot life (30 minutes) once it's mixed with the converter. Once you get the product out of your mixing bucket it takes much longer for it to tack off.

Product Data Sheet
MSDS

CURE SCHEDULE:
pot life – 1 1/2 gallon volume: minutes @ 70 degrees F
tack free (dry to touch): hours @ 70 degrees F
recoat or topcoat: hours @ 70 degrees F
light foot traffic: hours @ 70 degrees F
full cure (heavy traffic): days @ 70 degrees F

APPLICATION TEMPERATURE: degrees F with relative humidity below 85%

SOLIDS BY WEIGHT: % (+/- 1%)
SOLIDS BY VOLUME: % (+/- 1%)
VOLATILE ORGANIC CONTENT: Nearly zero pounds per gallon
COLORS: Light Gray, Medium Gray, Charcoal, Off White, Beige, Tan, Wheat, Taupe, Tile Red, Royal Blue, Steel Blue, Black, White
RECOMMENDED FILM THICKNESS: mils
COVERAGE PER GALLON: square feet per gallon @ mils
PACKAGING INFORMATION: 3 gallon kits ( – gallons net approximately)
MIX RATIO: 12 pounds (1 gallon) part A to pounds ( gallons) part B (volumes approx.)
FINISH CHARACTERISTICS: Gloss ( at 60 degrees @ Erichsen glossmeter)
ABRASION RESISTANCE: Taber abraser CS calibrase wheel with gram total load and cycles = 32 mg loss
FLEXURAL STRENGTH: 5, psi @ ASTM D
COMPRESSIVE STRENGTH: 9, psi @ ASTM D – 1/2" X 1/2" bars
ADHESION: psi @ elcometer (concrete failure, no delamination)
VISCOSITY: Mixed = cps (typical, most colors)
TENSILE STRENGTH: 4, psi @ ASTM D
ULTIMATE ELONGATION: %
GARDNER VARIABLE IMPACTOR: 50 inch pounds direct – passed
HARDNESS: Shore D = 80

PRODUCT STORAGE: Store product at normal room temperature. Continuous storage should be between 60 and 90 degree F. Low temperatures or temperature fluctuations may cause product crystallization.

SURFACE PREPARATION: The most suitable surface preparation would be a fine brush blast (shot blast) to remove all laitance and provide a suitable profile. All dirt, foreign contaminants, oil and laitance must be removed to assure a trouble free bond to the substrate. A test should be made to determine that the concrete is dry; this can be done by placing a 4’X4’ plastic sheet on the substrate and taping down the edges. If after 24 hours, the substrate is still dry below the plastic sheet, then the substrate is dry enough to start coating.

PRODUCT MIXING: This product has a mix ratio of 12# part A to # part B or two parts A to one part B by volume for standard colors. Standard packages are in pre-measured kits and should be mixed as supplied in the kit. We highly recommend that the kits not be broken down unless suitable weighing equipment is available. After the two parts are combined, mix well with slow speed mixing equipment such as a jiffy mixer until the material is thoroughly mixed and streak free. After mixing, transfer the mixed material to another pail (the transfer pail) and again remix. The material in the transfer pail is now ready to be applied on the primed substrate. Improper mixing may result in product failure.

PRIMING: A suitable primer should be used before applying this product. See the front side of this technical data for primer information. If a primer is not used, more porous substrates may cause outgassing and possible surface defects.

PRODUCT APPLICATION: The mixed material can be applied by brush or roller. However, the material can also be applied by a suitable serrated squeegee and then back rolled as long as the appropriate thickness recommendations are maintained. Maintain temperatures and relative humidity within the recommended ranges during the application and curing process. If concrete conditions or over aggressive mixing causes air entrapment, then an air release roller tool should be used prior to the coating tacking off to remove the air entrapped in the coating.

RECOAT OR TOPCOATING: If you opt to recoat or topcoat this product, you must first be sure that the coating has tacked off before recoating. However, all previous coats should be deglossed to insure a trouble free bond prior to application of recoats or topcoats. Colder temperatures will require more cure time for the product before recoating or topcoating can commence. Before recoating or topcoating, check for epoxy blushes (a whitish, greasy film or deglossing). If a blush is present, it can be removed by any standard detergent cleaner prior to topcoating or recoating. Many epoxy coatings and urethanes as well as multiple coats of this product are compatible for use as a topcoat.

CLEANUP: Use xylol. (xylene)

FLOOR CLEANING: Caution! Some cleaners may affect the color of the floor installed. Test each cleaner in a small area, utilizing your cleaning technique. If no ill effects are noted, you can continue to clean with the product and process tested. RESTRICTIONS: Restrict the use of the floor to light traffic and non-harsh chemicals until the coating is fully cured (see technical data under full cure). It is best to let the floor remain dry for the full cure cycle.

% Solids/Norklad Color Chart

Epoxy Superstore

The Norkan Family Of Companies

© Norkan Inc. All rights Reserved

Sours: https://www.epoxysuperstore.com/solids-epoxy.php
Epoxy over Tile

EPOXY MORTAR COMPLETE KIT 2 GAL, 5 GAL &#; BULK SIZE

Description

Three component % solids epoxy mortar designed for applications where excellent wear resistance and strength are required such as forklifts, and steel wheeled equipment. Each kit contains 2 components of epoxy A & B  plus special aggregate. The three components get mixed together to form an incredibly durable &#;epoxy mortar&#; that gets troweled onto your surface. Used for floor leveling, hole filling, patching, concrete repairs, etc. Can withstand up to 50, lbs/sq ft.  Copmpressive strenght 11, lbs.

Exhibits amazing adhesion and resists &#;pop out&#; like cement-type patches.

Two sizes available:

Bulk Kit ( CU FT) &#; Coverage sq ft @ 1/4&#; thick. Wt. lbs total per kit.

5 Gallon Kit ( CU FT) &#; Coverage sq ft @ 1/4&#; thick. Wt. 65 lbs total per kit.

2 Gallon Kit ( CU FT) &#; Coverage sq ft @ 1/4&#; thick. Wt. 26 lbs total per kit.

 

 

 

SKU:  AI

Sours: https://armorpoxy.com/products/epoxy-mortar/

Clear 5 floor epoxy gallon

And my wife answered: - Yes, I choose Grigory Mikhailovich Zhilin. He is the most worthy for the role of my main lover, for the role of a master in our family. He suggested that my husband and I move to his house so that Grigory Mikhailovich could have sex with me at.

Any time, arrange orgies with my participation and monitor my husband's chastity around the clock.

Installation of Floor-Glaze Clear Epoxy Coating

I want to tell you about an incident that happened to me three years ago. This acquaintance marked the beginning of several very interesting and new sex adventures for me. I havent told anyone about this yet, but the memories of my experiences haunt me, I constantly return mentally to the events of that evening and this causes an incomparable excitement.

In me. I was then 32 years old, and I was pregnant from second husband.

You will also be interested:

When I took Natasha to her place, I felt the views of not only Galina Vladimirovna. And in order to somehow defuse the situation, I danced the next dances with the girls from the neighboring laboratory, without inviting Natasha. She pulled out some old uncle, but, having danced with him quite a bit, let him go to his place and no longer danced, leaning on alcohol. By the end of the evening she had already drunk quite a lot, not very firmly on her feet.



2079 2080 2081 2082 2083