Recessed coaxial cable wall plate

Recessed coaxial cable wall plate DEFAULT

How to Install Coaxial Wall Plate

By Cecilia Harsch

Upgrade your dryer cord so you can plug it into a modern receptacle.

Cable television companies and satellite providers often run several lines of coaxial cable throughout your home during the initial installation. Depending on the placement of your televisions and other components, you may find several feet of coaxial cable exposed and coaxial wall plates that come off the wall with the slightest tug. Install a new coaxial cable wall plate and clean up messy cords at the same time to give your home a more streamlined, clutter-free look.

Coaxial Cable Preparation

Cut through the coaxial cable with wire cutters to reduce the length of cable. Leave approximately 1 foot of cable extending from the wall.

Measure 3/4 inch from the end of the coaxial cable. Use a pen to mark on the outside insulation of the coaxial at the measurement. At your mark, use wire cutters to carefully cut through the outside insulation, the metal mesh wrapping beneath the outside insulation and the white insulating material that surrounds the thin copper conductor in the center of the cable. Do not cut through the copper conductor. Slide the insulating materials off the conductor.

Mark the outside insulation of the cable 3/8 inch from the end of the insulation. Carefully cut through the outside insulation only and remove it. Your cable should have 3/4 inch of copper conductor exposed and 3/8 inch of metal mesh wrapping exposed.

Slide the smaller end of an RG-6 twist-on F-connector over the prepared end of the coaxial cable. Firmly twist the connector clockwise to secure it to the end of the cable.

Coaxial Wall Plate Installation

Slide the coaxial cable through a low-voltage mounting plate. Hold the mounting plate against the wall. Trace around the inside of the mounting plate onto the wall where the cable emerges. You may already have a hole in the wall, but it's necessary to match the size of the plate to the size of the cut out, so the plate installs correctly.

Cut through the drywall along the trace line with a jab saw. Position the low-voltage mounting plate against the cutout on the wall. Bend the two metal tabs on the inside of the low-voltage mounting plate into the wall. Continue to the bend the tabs until they clamp onto the drywall. The mounting plate acts as a bracket and has screw holes for the coaxial wall plate.

Twist the connector for the end of the coaxial cable to the back of the connector on the coaxial wall plate. Place the wall plate against the wall and over the low-voltage mounting plate. Use the screws that came with the coaxial wall plate to attach it to the mounting plate.

Connect the end of a length of coaxial cable to the connector on the outside of the wall plate. Connect the other end of the coaxial to your television or receiver.

References

Writer Bio

Cecilia Harsch has been writing professionally since 2009. She writes mainly home improvement, health and travel articles for various online publications. She has several years of experience in the home-improvement industry, focusing on gardening, and a background in group exercise instruction. Harsch received her Certified Nurses Assistant license in 2004. She attended Tarrant County College and studied English composition.

Sours: https://homeguides.sfgate.com/install-coaxial-wall-plate-37804.html

Recessed Low Voltage Cable Plate, Recessed Power, White

Recessed Low Voltage Cable Plate with Recessed Power, White - Part Number: 45-0021-WH

Recessed Low Voltage Cable Plate with Recessed Power, White - Part Number: 45-0021-WHHow to Hide Wires for Wall Mounted TV - Easy DIY

In stock - Usually ships same day


Quantity Discount
2050100250
$17.53$17.41$17.28$CALL

There are no reviews yet.

Product Description Recessed Low Voltage Cable Plate with Recessed Power is used to install low voltage cables and power behind your flat panel TV, your amplifier or other audio video devices. The wall plate can be installed facing up or down.

Part #: 45-0021-WH

Recessed Low Voltage Cable Plate with Recessed Power, White

  • Warranty:1 year
  • Color:White
  • Weight:0.35 lbs
Helpful Downloads

There are not enough ratings for this product to produce an average rating.

Sours: https://www.cablewholesale.com/products/home-theater/low-voltage-brackets-and-plates/product-45-0021-wh.php
  1. Tuscan stainless steel kitchen
  2. Jobs in oakdale la
  3. 295 60r20 in inches

Top 10 Best Wall Plates For Cables 2020

Top 10 Best Wall Plates For Cables 2020

1. Fosmon 1-Gang Wall Plate (5 Pack), Brush Style Opening Passthrough Low Voltage Cable

  • Excellent for flat panel tv’s and audio/video gadgets
  • Clear and simple set up
  • Designed for the set up of low voltage cables and wires
  • Flush mounting to gang containers or wall plate brackets
  • To be used with speaker wires, coaxial, hdmi and community/telephone cables

2. VCE 2-Pack Single Brush Wall Plate Cable Pass Through Insert for Wires, Single

  • Clean and clear hdtv installations, excellent for hdtv cables and residential theater installations
  • Run your cables cleanly and neatly by way of the wall, the bundle is supplied with mounting screws.
  • With ul listed, simply use it with out concern.
  • Straightforward arrange, installs in simply minutes, insert the comb into the outer casing and place on the wall
  • Word:the identical dimension as a typical outlet wall plate(common single outlet dimension), the plate does not match carlon plastic previous work containers or frames. please comfirm the scale earlier than ordering!!

3. Cable Wall Plate 2 Pack Decotive Recessed Wall Plate with Easy Mount Wings

  • Single gang aspect opening cable administration wall plate – recessed outlet wall plates for cables administration, 1 gang recessed low voltage plate, backside opening for wall cable go by way of
  • Abs multimedia wall plate – the recessed wire field plate is manufactured from non-borken abs materials, strong low voltage wall plate
  • Recessed cable plate is for wires and in wall cable administration package – low voltage cable plate, efficient recessed wall outlet for television, disguise wires in wall behind the flat television or different electrical media
  • Good mount wings recessed coax wall plate – straightforward mount cable wall plate, no further bracket wanted, excellent for wall wire go by way of, nice answer for information twine outlet
  • Pack & guarantee – 2pcs recessed cable wall plate for television; life time guarantee; serach “wi4you” for extra wall plate answer

4. Buyer’s Point Brush Wall Plate [UL Listed], Decora Style, Cable Pass Through Insert

  • Clean and clear hdtv installations, excellent for hdtv cables and residential theater installations
  • Straightforward arrange, installs in simply minutes, insert the comb into the outer casing and place on the wall
  • Simply run cables by way of wall, single brush wall plate simply creates cable entry from any wall.
  • All cable varieties, gang cable entry strap works completely with hdmi cables, coax, audio speaker wires
  • White/ivory shade matches your property, socket plate means that you can match your wall plates in your house

5. Wi4You Brush Wall Plate White Deco Bristle Single Gang Wall Plate with Mounting

  • Handle cables with cable wall plate – the decora brush wall plate makes your property will seems clear and neat, easy and good
  • Brush cable wall plate – 2 pack decora cable outlet wall plate brush, mounting bracket wings, person guide, solely easy steps to complete putting in
  • Brush wall plate for cables concealing straightforward – 1 gang brush wall plate for all low voltage cables of the panel television and residential theater system; with wall plate with brush, structure the cables instantly from the drawall easily. apart from, the wall plates brush is simply liake a versatile mud cowl
  • Brush wall plate for television – brush fashion wall cable plate excellent for all av low voltage cable wires ( rca, hdmi, vga, usb, audio video, networking cables), very nice medial brush wall plate pack
  • High quality guarantee for – 1-year high quality assure by wi4you. if in case you have any query, please contact us for fast help

6. TOPGREENER Flexible Rubber Grommet Opening Pass-Through Insert with Decorator Wall Plate for Low-Voltage

  • Works with hdmi cables, coaxial cables, commonplace a/v cables, speaker wires, dvi, s-video, community rj45 cables, and different low-voltage cables.
  • Outer dimensions: Four.50” peak x 2.75” size x zero.25” depth. inside dimensions: .87” peak x .50” size. suits commonplace electrical single gang field.
  • The right answer for working low voltage audio or video cables by way of partitions to flat panel tvs, gaming techniques, or dwelling theatre techniques
  • Protects cables from unintended stripping. minimizes the publicity of wall openings.
  • Intertek’s etl listed mark is proof that our product has been independently examined and meets the relevant revealed requirements.

7. VCE 3 Pack Single Brush Wall Plate with Single Gang Low Voltage Mounting

  • Straightforward arrange, installs in simply minutes, insert the comb into the outer casing and place on the wall. run your cables cleanly and neatly by way of the wall,the bundle is supplied with mounting screws.
  • Word:the identical dimension as a typical outlet wall plate(common single outlet dimension), the plate does not match carlon plastic previous work containers or frames. please comfirm the scale earlier than ordering!!
  • The one brush wall plate with ul listed, simply use it with out concern.
  • Single gang (1-gang) low voltage mounting bracket adjusts to suit 1/Four-inch to 1-inch thick wall board, paneling, or drywall; designed to mount wall plates flush.
  • Package deal contents:three x single brush wall plate+three x single gang low voltage mounting bracket items per plastic bag

8. Recessed Cable Wall Plate 4 Pack with Fly Mounting Wings Bottom Opening

  • Backside opening cable administration wall plate – recessed coax wall plate for cables administration, 1 gang recessed low voltage plate, backside or aspect opening for wall cable go by way of
  • Abs multimedia wall plate – the recessed wire field plate is manufactured from non-borken abs materials, strong recessed cable plate
  • Wi4you recessed television outlet field build-in straightforward mount wings recessed wall plate – straightforward mount recessed wall plate, no further bracket wanted, excellent for wall wire go by way of, nice answer for information twine outlet
  • Recessed cable plate for cables and wires concealing – low voltage cable plate, efficient recessed wall outlet for television, disguise wires in wall behind the flat television or different electrical media
  • Pack & guarantee – Four pcs recessed cable wall plate for television; life time guarantee; serach “wi4you” for extra wall plate answer

9. Cable Matters 10-Pack Low Profile 1 Port Keystone Jack Wall Plate in White

  • Single gang keystone wall plate 1 port suits a standard-sized receptacle with the included mounting screws; add a brand new patch cable location similar to an rj45 keystone jack wall plate utilizing a low voltage mounting bracket; suits a typical single gang wallplate opening
  • Value-effective 10-pack of keystone insert wall plates offers sufficient outlet plates for a couple of renovation tasks at dwelling or within the workplace
  • 1 port wall plate for keystone jacks creates an a/v cable patch location for a house theater media middle or workplace convention room; accepts many varieties of keystone inserts together with rj45 cat 6 ethernet, hdmi, rg6 coax, banana plug, and extra
  • Low-profile cable wall plate with a canopy that’s nearly flush with the wall; up to date shiny design of those face plates offers knowledgeable trying set up
  • Ul listed keystone jack (e486099) faceplate meets constructing specs for low combustion wall shops with flame-resistant, abs plastic development

10. TOPGREENER Recessed Low Voltage Cable Wall Plate for Home Theaters, Size 2-Gang 4.50″

  • Works with hdmi cables, coaxial cables, commonplace a/v cables, speaker wires, dvi, s-video, community rj45 cables, and different low-voltage cables
  • Made from polycarbonate thermoplastic materials to supply sturdiness and resilience to resist laborious impacts and heavy pressure
  • The right answer for concealing low-voltage audio or video cables inside your wall. reduces wire muddle, and offers a hidden cable administration system for flat panel tvs, gaming techniques, or leisure consoles
  • Reversible cable entrance may be mounted dealing with up or right down to run communications cabling as desired. simply put in onto low-voltage mounting brackets
  • Etl listed – product has been examined and meets the top quality and security requirements of etl

Dinu das

Tech specialist. Social media guru. Evil problem solver. Total writer. Web enthusiast. Internet nerd. Passionate gamer. Twitter buff.

Sours: https://bestgamingpro.com/wall-plates-for-cables/
How to Install Cable TV Outlet Box, Wall Plate \u0026 Patch Walls

HDMI Coax Ethernet Wall Plate [UL Listed] with Single Gang Low Voltage Mounting Bracket Device (Black Kit)

In stock

Features:

  • Tooless adapter connection. Just plug one cable into the front and one into the back.

  • Fits standard outlet boxes. HDTV, Smart HDTV, laptops, Blu-ray or DVD players, AV receivers and more

  • HDMI 2.0, Coax, High quality Cat6 RJ45 Ethernet. Wall plate screws are included.

  • Includes Low-Voltage Mounting Bracket for easy installation.

  • Keystone jacks are removable unlike competitor plates for future upgrades.

Save by buying in multi-packages:

Compare

SKU: 1035Categories: 1 Connector, 1 Connector, Audio & Video, Combo, Combo, Combo Wall Plates, Ethernet Wall Plates, HDMI + Ethernet + Coax, HDMI Wall Plates, Networking, PigtailTags: Audio & Video, Networking

HDMI Coax Ethernet Wall Plate with Single Gang Bracket Device

New Heavy Duty Screw Free Back Connector

No more worries of back connector breaking during install. Unlike other Brands or Older Models, this new heavy-duty model gets rid of the screw in the back connector that sometimes would break on install.

Description

This HDMI/Coax/Ethernet wall plate allows in-wall installation of HDMI, Coax, and Ethernet/network cable in the same wall plate. It fits standard wall plate outlets and features gold-plated HDMI connectors. It’s perfect for smart HDTVs and other network devices.

Avoid a Mess

Enjoy In-Wall high-speed Cat6 data connection and HDMI in your room or office without tangled cables!

Quick and Easy to Install

To maintain its neat and discreet design, the port is white color – exactly the same as most light switch and power plug wall plates – to maintain a consistent color scheme throughout your home or office.

Hard to find Black Color Fits Your Home

To maintain its neat and discreet design, the plate is black color – exactly the same as most light switch and power plug wall plates – to maintain a consistent color scheme throughout your home or office.

Additional information

Weight3.52 oz
Dimensions6 × 4 × 3 in
SKU

1035

color

Black

size

1 Pack

Will this work for a 3D signal?

Yes, the couple is HDMI 2.0 and will support 3D and 4K video.

Does this accept an ethernet plug in the front and back of the plate or must the individual ethernet cable wires be connected to the back of the jack?

It's an ethernet jack on both sides.

Is this backward compatible with HDMI 1.4?

Yes, this is backward compatible with HDMI 1.4

You may also like…

Related products

Sours: https://buyerspoint.com/product/hdmi-coax-ethernet-wall-plate-with-single-gang-low-voltage-mounting-bracket-device-black-kit/

Coaxial cable plate recessed wall

Recessed Cable Wall Plate 4 Pack with Fly Mounting Wings Bottom Opening for Wall Plate Cable Pass Through for Speaker Wires, Coaxial Cables, HDMI Cables, or Network/Phone Cables WI1009-4

Recessed Cable Wall Plate 4 Pack with Fly Mounting Wings Bottom Opening for Wall Plate Cable Pass Through for Speaker Wires, Coaxial Cables, HDMI Cables, or Network/Phone Cables WI1009-4

Wi4you

200 ratings Write a review

Item #:

USD26

Order now and get it around Saturday, October 30

Note: Electronic products sold in US store operate on (110-120) volts, a step-down power converter is required for the smooth device function. It is mandatory to know the wattage of the device in order to choose the appropriate power converter. Recommended power converters Buy Now.


Product Details

  • Wi4you recessed tv outlet box Build-in Easy mount wings - easy mount recessed wall plate, no additional bracket needed, perfect for wall wire pass through, great solution for data cord outlet
  • Bottom opening cable management wall plate - recessed coax wall plate for cables management, 1 gang recessed low voltage plate, bottom or Side opening for wall cable pass through
  • Recessed cable plate for cables and wires concealing - low voltage cable plate, effective recessed wall outlet for TV, hide wires in wall behind the flat TV or other electric media
  • ABS multimedia wall plate - the recessed wire box plate is made of non-broken ABS material, solid recessed cable plate
Is Discontinued By Manufacturer ‏ : ‎No
Product Dimensions ‏ : ‎10.6 x 7.46 x 1.95 inches (26.9 x 18.9 x 5 cm); 8.01 Ounces (227.08 grams)
Item model number ‏ : ‎WI1009-4
Manufacturer ‏ : ‎Tianxiaxing
ASIN ‏ : ‎B07S92ZXB7
Country of Origin ‏ : ‎China
Brand NameWi4You
ColorBottom Opening,4pack
Compatible DevicesSpeaker , Television , DVD Player , Personal Computer
Connector TypeCoaxial , HDMI , RCA , VGA
Ean0713325253760
Model NumberWI1009-4
Part NumberWI1009-4
SizeBottom opening, 4-pack (0 cm)
UNSPSC Code26121600
UPC713325253760
Connector TypeRCA, VGA, HDMI, Coaxial
Compatible DevicesTelevision, DVD Player, Personal Computer, Speaker
ColorBottom Opening,4pack
BrandWi4You

Description

Recessed Cable Wall Plate 4 Pack with Fly Mounting Wings Bottom Opening for Wall Plate Cable Pass Through for Speaker Wires, Coaxial Cables, HDMI Cables, or Network/Phone Cables WI1009-4

Similar Products

Explore cable covers for walls, Explore TV wire covers for walls, Explore hidden cords for TVs, Explore cable hiders for walls, Explore wall pass throughs for wires

Customer Questions & Answers

  • No question and answer found

Customer Ratings

0 customers ratings

  • 5 Star 0%
  • 4 Star 0%
  • 3 Star 0%
  • 2 Star 0%
  • 1 Star 0%

Review this product

Share your thoughts with other customers

Customer Reviews

  • No customer reviews found

Write Your Own Reviews

Only registered users can write reviews. Please log in or register

Sours: https://www.ubuy.com/product/1AF82ZMGG-recessed-cable-wall-plate-4-pack-with-fly-mounting-wings-bottom-opening-for-wall-plate-cable-pass-through-for-speaker-wires-coaxial-cables-hdmi
D Line Decorative Cable Trunking Cover

White Recessed HDMI Wall Plate, with HDMI, CAT5e and Coax Connector

We offer Free Shipping on most orders over $99 to the contiguous United States. Orders shipped to Alaska and Hawaii are excluded.

Free Shipping does not apply to heavy items like Bulk cable, some heavy or long cables, Racks and some Rack Equipment.

Although you can add excluded Free Shipping items to your Free Shipping Order, it will not count towards your qualifying total, and once the rest of your order exceeds the Free Shipping threshold, the shipping will show for just the items that are excluded from the Free Shipping offer.

If you purchased enough items to qualify for the Free Shipping discount, and then later returned some or all of the items bringing your total below the Free Shipping threshold, then the original shipping amount will be deducted from your refund.

Free Shipping orders are shipped via UPS Ground Service.

Free Shipping orders can not be shipped to PO Boxes.

Sours: https://www.pchcables.com/whrehdwaplwc.html

You will also like:

Cable Entrance & Exit

For data, network or home theater applications, these low voltage plates allow cables to pass through walls. Many different entry/exit plates are available, including slotted plates, brush plates and plates for bulk cable pass-thru. Recessed and hooded styles, and even reversible models are available, or if you need to cover up an outlet, try our blank wall plates.

Seamlessly Pass Cables through Your Walls with the Right Wall Plate

At CableOrganizer.com, we are all about keeping cables and wires neat and orderly. Cables can get messy fast, especially in areas where a number of them are needed, like for data, network, or home theater applications. We have a wide variety of wall plate covers to fit your needs, no matter if you are trying to create a neat look for your own home theater, or if you are working on a job for a client. Our cable entrance and exit wall plates will give you the professional look and convenient usage you are looking for.

Wall Plate Staff Favorites


We asked our staff what some of their favorite wall plates were, and they answered! Here are five of the wall plates we sell and why they work so well.
  • The Recessed Pro-Power/Flat Panel TV Cable Organizer Kit. This kit gives you exactly the power connection and cable pass through you need behind home theater electronics and flat panel TVs. The recessed outlet is perfect for tight spaces because it keeps plugs from extending away from the wall. This kit comes in a few different styles, all of which keep your A/V cables neat and hidden away.
  • The Flat Panel TV Bulk Cable Wall Plate. If simplicity is what you are going for, this Vanco wall plate is a terrific option. It has just one single opening which allows you to easily run cables and connectors so that you achieve cable organization. It is specifically designed to fit behind most wall mounts and flat panel televisions. This is a great option for people who are creating a DIY home theater!
  • The Flexo System. This special plate combines a mounting solution with braided sleeving. It has a split ring collar that is designed to easily snap onto preexisting braided sleeving with no special tools. When installed, it provides strain relief for cables and wires.
  • The Vanco Brush Plates. This is an affordable option that yields professional results. They are available in a single or dual gang and come in three different finishes. These wall plates ensure impeccable cable management for anywhere you need to wrangle a number of different cables.
  • Blank Wall Plates. Sometimes you need to close space where there used to be cable access through a wall. This blank wall plate gives you a smooth, finished surface so that you don't have unsightly holes in your wall. Also, it protects stray fingers and hands from getting an electric shock. They come in a number of different colors to match your decor, and can also be easily painted over.

If you need assistance finding the right wall plate for your home theater or conference room, please give us a call so that we can make sure you find the perfect one for your needs!

Sours: https://www.cableorganizer.com/categories/electrical-supplies/wall-plates/cable-entrance-exit/


1126 1127 1128 1129 1130